Echo MegaLoop User Manual
Echo Megaloop
TM
Aid for Living Inductive Loop Amplifier
Please read and follow the safety instructions before using the product
Safety Instructions and Precautions
· Listening to uncomfortable sound levels for prolonged periods could adversely affect your
hearing.
· If using a microphone, line input, headset or neck loop the plug MUST be fully inserted into the
correct socket and the volume turned to the lowest level (anti-clockwise) before turning the unit
on (Fig. 1 and Fig. 2). Failure to do so can result in high sound levels that could adversely affect
your hearing.
· If using a headset or neck loop it MUST be fully inserted into the headset socket before turning
the unit on. Failure to do so can result in high sound levels that could adversely affect your
hearing.
· Using this product inappropriately could adversely affect your hearing. Please follow the step-by-
step instructions carefully!
· Do not use in an environment that is damp, wet, very hot or very cold.
· To clean the Megaloop
TM
and its accessories, use only a soft cloth and an inorganic cleaner.
· Only use the Hearing Products approved mains adapter. Do not use any other type of mains
adapter.
· When using this unit, basic safety precautions as below should always be followed to avoid the
risk of electrical shock or personal injury.
· Read and understand the instructions and follow all warnings and markings on the unit.
· Install the unit securely on a stable surface and install the unit where the power cord will not be
subject to damage or cause a tripping hazard.
· The unit may get warm when being used. Ensure the unit has adequate ventilation.
·
Please refer all servicing to qualified personnel ONLY! Do not attempt to open the unit!
·
WARNING: Excessive volume from any source may damage your hearing. Turn the Volume
Control (2) (Fig. 1) anti-clockwise to low before plugging in headset or switching your hearing aid
to
“T” position.
Contents