1. DL manuals
  2. Echo
  3. Pole Saw
  4. PPT-260 - 03-03 1
  5. Operator's Manual

Echo PPT-260 - 03-03 1 Operator's Manual

Other manuals for PPT-260 - 03-03 1: Operator's Manual

Summary of PPT-260 - 03-03 1

  • Page 1

    P ower p runer tm o perator ' s m anual 1 power pruner tm operator's manual model: ppt-260 serial number 05001001 - 05999999 warning danger x753000540 03/03 x7532090700 read rules for safe operation and instructions carefully. Echo provides an operator's manual and a safety manual. Both must be read...

  • Page 2

    2 i ntroduction welcome to the echo family. This echo product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the safety manual you found in the same package. You will find both easy to use and full of helpful operating tips and sa...

  • Page 3: Ower

    P ower p runer tm o perator ' s m anual 3 the circle with the slash symbol means whatever is shown within the circle is prohibited. This symbol accompanied by the words warning and danger calls attention to an act or condition that can lead to serious personal injury to operator and bystanders. M an...

  • Page 4

    4 international symbols s afety i nstructions personal condition and safety equipment warning danger power pruner tm users risk injury to themselves and others if the power pruner tm is used improperly and or safety precautions are not followed. Proper clothing and safety gear must be worn when oper...

  • Page 5: Ower

    P ower p runer tm o perator ' s m anual 5 extended operation / extreme conditions vibration and cold it is believed that a condition called raynaud’s phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold m...

  • Page 6

    6 warning danger kickback can lead to dangerous loss of control of the power pruner tm and result in serious injury to the operator or any one standing close by. Hold the power pruner tm firmly with both hands with thumbs and fingers encircling the front and rear handles. Be aware of the down-and-ou...

  • Page 7: Ower

    P ower p runer tm o perator ' s m anual 7 e mission c ontrol epa phase 2 the emission control systems for these engines are em (engine modification). Important engine information engine family: 3ehxs.0254ea displacement: 25.4 cc this engine meets u.S. Epa phase 2 emission this engine meets u.S. Epa ...

  • Page 8

    8 1 12 11 10 2 3 9 14 15 16 17 18 19 20 21 13 8 7 6 5 4 22 23.

  • Page 9: Ower

    P ower p runer tm o perator ' s m anual 9 1. Power head - includes the engine, clutch, fuel system, ignition system and starter. 2. Throttle trigger - spring loaded to return to idle when released. During acceleration press trigger gradually for best operating technique. 3. Shoulder harness - an adj...

  • Page 10

    10 s pecifications model ----------------------------------------------------- ppt-260 length (standard) ----------------------------------------- 2.76 m (9 ft. 1 in.) length (extended) ----------------------------------------- 3.90 m (12 ft. 10 in.) length w/extension ------------------------------...

  • Page 11: Ower

    P ower p runer tm o perator ' s m anual 11 b e d a a ssembly tools required: 10x19mm (13/32x3/4in) t-wrench, 3 & 4 mm hex wrench parts required: power head, drive shaft assembly, cutting attachment drive shaft / power head 1. Loosen bolt (a). 2. Match square socket in engine shaft with square power ...

  • Page 12

    12 e d f g h g h i j 2. Loosen center clamp knob (f) turning counter clockwise. 3. Pull upper tube (g) out of fiberglass lower tube 127-152 mm (5-6 in.), then slide (g) back into fiberglass lower tube exposing inner drive shaft (h). Align and join star shaped drive end of inner drive shaft (h) with ...

  • Page 13: Ower

    P ower p runer tm o perator ' s m anual 13 saw chain tension adjustment warning danger always disconnect spark plug wire before servicing cutting attachment. Wear gloves when handling saw chain, otherwise serious personal injury may result. To adjust saw chain tension. 1. Loosen two (2) 10 mm (13/32...

  • Page 14

    14 important spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. Contact your echo dealer for ordering information. After refueling • wipe any spilled fuel from the unit. • move at least 3 m (10 ft.)...

  • Page 15: Ower

    P ower p runer tm o perator ' s m anual 15 automatic oiling system 1. Wipe debris from around oil fill cap. 2. Remove oil fill cap and fill reservoir with a quality, low viscosity guide bar and saw chain oil. Note the discharge volume of the automatic oiler is preset to deliver 3 to 4 cc/min. At nor...

  • Page 16

    16 o peration starting cold engine warning danger the attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. 1. Stop s...

  • Page 17: Ower

    P ower p runer tm o perator ' s m anual 17 starting warm engine the starting procedure is the same as cold start except do not close the choke, and do not depress throttle trigger to wide open position. Warning danger the attachment should not move at idle, otherwise serious personal injury may resu...

  • Page 18

    18 stopping engine 1. Throttle. Release throttle trigger, and allow engine to return to idle before stopping engine. 2. Stop switch. Move stop switch button (a) backward to stop position. Warning danger if engine does not stop when stop switch is moved to stop position, close choke - cold start posi...

  • Page 19: Ower

    P ower p runer tm o perator ' s m anual 19 m aintenance your echo power pruner tm is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your pruner achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take you...

  • Page 20

    20 air filter level 1. Tools required: cleaning brush 25 or 50 mm (1 or 2 in.) parts required: 90030 repower tm air and fuel filter kit 1. Close choke (cold start position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from the air...

  • Page 21: Ower

    P ower p runer tm o perator ' s m anual 21 spark plug level 2. Tools required: 10x19mm (13/32x3/4in) t-wrench, feeler gauge, soft metal brush parts required: repower tm tune-up kit p/n 90075 1. Remove spark plug and check for fouling, worn and rounded center electrode. 2. Clean the plug or replace w...

  • Page 22

    22 1. Remove spark plug lead. 2. Remove two (2) muffler cover screws and muffler cover (a). 3. Remove screw and arm rest (b). 4. Remove engine cover (c). Important do not use a metal scraper to remove dirt from the cylinder fins. 5. Use brush to remove dirt from the cylinder fins. 6. Remove grass an...

  • Page 23: Ower

    P ower p runer tm o perator ' s m anual 23 1. Remove spark plug lead. 2. Remove muffler cover (a). 3. Place piston at top dead center (tdc) to prevent carbon/dirt from entering cylinder. 4. Remove spark arrestor screen cover (b), gasket (c), and screen (d) from muffler body. 5. Clean carbon deposits...

  • Page 24

    24 warning danger when carburetor adjustment is completed, the cutting attach- ment should not turn at idle, otherwise serious personal injury may result. Note every unit is run at the factory and the carburetor is set in compli- ance with emission regulations. This carburetor does not have accelera...

  • Page 25: Ower

    P ower p runer tm o perator ' s m anual 25 filing saw chain level 3. Tools required: 4.5 mm round file p/n 89751001130, flat file p/n 89751100230, depth gauge p/n 89751400232. Important dull or damaged cutters will result in poor cutting performance, increased vibration and premature saw chain failu...

  • Page 26

    26 t r a h c g n i t o o h s e l b u o r t m e l b o r p e n i g n e m e l b o r p k c e h c s u t a t s e s u a c y d e m e r e n i g n e - s k n a r c / d r a h s t r a t s t ' n s e o d t r a t s r o t e r u b r a c t a l e u f r o t e r u b r a c t a l e u f o n d e g g o l c r e n i a r t s l e...

  • Page 27: Ower

    P ower p runer tm o perator ' s m anual 27 2. Place the stop switch in the "off" position. 3. Remove accumulation of grease, oil, dirt and debris from exterior of unit. Important some tree sap and resins are corrosive. Thoroughly wash the guide bar and sprocket areas after each use, then coat metal ...

  • Page 28

    Dealer? Call 1-800-432-echo or www.Echo-usa.Com consumer product support 1-800-673-1558 8:30 - 4:30 mon - fri c.S.T. Echo, incorporated 400 o akwood r oad l ake z urich , il 60047 www.Echo-usa.Com s ervicing i nformation parts genuine echo parts and echo repower™ parts and assemblies for your echo p...

  • Page 29

    This supplement contains important infor- mation. Please keep with your operator's manual. 99922203726 11/03 sup22203726 e mission c ontrol epa phase 2 the emission control system for these engines is em/twc (engine modification with catalyst). S pecifications exhaust -------------------------------...

  • Page 30

    Service aprÈs - vente echo pour toute assistance ou question concernant l’application, l’utilisation ou l’entretien de ce produit, appeler le service d’assistance clients echo au 1-800-673-1558, de 8 heures 30 à 16 heures 30 (heure normale du centre), du lundi au vendredi. Avant d’appeler, veiller à...