1. DL manuals
  2. Echo
  3. Pressure Washer
  4. PWE-1800
  5. Instruction Manual

Echo PWE-1800 Instruction Manual

Summary of PWE-1800

  • Page 1

    Instruction manual model pwe-1800 93567-dp warning: to reduce the risk of injury, the user must read and understand the instructions before using this product. Save these instructions for future reference customer help line 1-800-673-1558.

  • Page 2: Uick

    2 1 2 1 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be taped to the manual) 4. High pressure hose 5. Spray gun holder 6. Nozzle tray 7. Screws (1 for nozzle tray) 8. High/low nozzle 9. Turbo nozzle 10. Spray gun (10a shows trigger lock button) 11. Power washer quick connect filter (c...

  • Page 3

    3 7. Connect lances to spray gun, insert lance into spray gun, push together and at the same time twist clockwise to lock in place. Removing push together and twist counterclockwise then pull apart. 8. The adjustable spray nozzle had has two (2) positions: •in position for high pressure spray. Desig...

  • Page 4

    Quick start.............................................................................2 specifications.......................................................................4 limited warranty.................................................................4 introduction...............................

  • Page 5: , W

    I ntroduction s afeguards , w arnings & s afety t ips congratulations on the purchase of your echo power washer! Your echo power washer is a power tool in every sense of the word that may be used outside your house and in. It is one of the finest most powerful home-use power washers in the marketpla...

  • Page 6: Gfci

    • never spray flammable liquids. • never use the power washer in areas that contain combustible dust, liquids or vapors. • avoid contact of the pressure hose with sharp objects and examine the hose regularly. Replace if damaged. Due to the high pressure involved, it cannot be repaired if cut of dama...

  • Page 7

    P ackage c ontent note - tool(s) required for assembly phillips screwdriver: hose reel for storage only 1 3 2 7 4 5 6 12 11 10 10a 9 8 7 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be taped to the manual) 4. High pressure hose 5. Spray gun holder 6. Nozzle tray 7. Screws (1 for nozzl...

  • Page 8: & A

    U npacking & a ssembly • after unpacking the echo power washer, lay out parts and accessories. Familiarize yourself with the parts in the package by comparing them to those listed on the “package contents” page. • the echo power washer requires some minor assembly. You’ll need a phillips screwdriver...

  • Page 9

    Fig. 4 fig. 5 fig. 6 high pressure hose • screw the high pressure hose (clockwise) on the left of the unit at the bottom (fig. 4). Pull back the collar and insert o-ring post into the water outlet far enough so the collar can thread onto the outlet threads until hand tight. Do not use pliers or vice...

  • Page 10

    2 1 2 1 spray gun • to lock the trigger of the spray gun aim the gun away from you and push the lock button from right to left, (fig. 7), after doing so, squeeze or pull the trigger to make sure it is locked and will not move. Always leave lock button in lock position when not in use. This ensures t...

  • Page 11

    • the adjustable spray nozzle had has two (2) positions (fig. 10): in position for high pressure spray. Twist the nozzle counterclockwise until it stops and gap is closed. Out position for low pressure spray for detergent function. Twist the nozzle clockwise until it stops and gap is open. • when us...

  • Page 12

    Garden hose adapter • install the garden hose adapter (gha) and quick connect filter. It is made up of two separate pieces. (1) a clear plastic adapter with a screen filter (about 3 inches long) and (2) collar attachment (fig. 13). • attach the garden hose adapter to the end of the garden hose (fig....

  • Page 14

    H ow t o c lean o perating t ips and m aintenance cleaning nozzles • a clogged or partially clogged nozzle can cause significant reduction of water pressure coming out of the nozzle and/or cause the unit to pulsate while spraying. • turn off the unit • turn off the water supply to the unit • relieve...

  • Page 15

    Fig. 23 pressure you can vary the force of your power washer by controlling: a. The angle of the surface being cleaned b. The distance of the nozzle from the surface being cleaned • never use a narrow high pressure stream of water or the turbo lance on soft surfaces susceptible to damage. • use the ...

  • Page 16

    S torage • do not store the power washer where it is exposed to freezing temperatures unless you use pump saver. It is recommended that you use pump saver for storing in freezing temperatures. Freezing will damage the pump unless pump saver is added to the power washer. • remove lance from the gun a...

  • Page 17

    P ump s aver pump saver is a product that protects and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in all climates. It also assists with protection from internal corrosion. Pump saver instructions follow the p...

  • Page 18

    R eplacement p arts 18 ref # kit description ref # kit description 1 handle assembly 11 garden hose adapter 2 hose reel assembly 12 pressure washer q/c filter 3 wheel assembly w/ guard 13 on/off switch 4 detergent tank 14 lance holder 5 gfci 15 nozzle tray 6 extension cord hook 16 accessory bracket ...

  • Page 19: Faq

    T roubleshooting and faq s unit will not turn on. Make sure the power washer is in the “off” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properl...

  • Page 20

    Model pwe-1800 customer help line 1-800-673-1558 echo incorporated 400 oakwood road lake zurich, il 60047 1-800-673-1558 www.Echo-usa.Com e-mail: support@echo-usa.Com.