1. DL manuals
  2. Echo
  3. Brush Cutter
  4. SRM-210 - 12-06
  5. Operator's Manual

Echo SRM-210 - 12-06 Operator's Manual

Summary of SRM-210 - 12-06

  • Page 1

    Grass trimmer/brush cutter operator's manual model srm-210 warning danger read rules for safe operation and instructions carefully. Echo provides an operator's manual and a safety manual. Both must be read and understood for proper and safe operation. X7712277700 x771000900 12/06.

  • Page 2

    2 copyright© 2006 by echo, incorporated all rights reserved. I ntroduction welcome to the echo family. This echo product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the safety manual before operation. You will find both easy to...

  • Page 3

    G rass t rimmer /b rush c utter o perator ' s m anual 3 personal condition and safety equipment international symbols important the enclosed message provides information necessary for the protection of the unit. Note this enclosed message provides tips for use, care and maintenance of the unit. Thro...

  • Page 4

    4 physical condition your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye protection wear eye protection that meets ansi z87.1 or ce requi...

  • Page 5

    G rass t rimmer /b rush c utter o perator ' s m anual 5 warning danger do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the manuals • provide all users of this equipment with the operator’...

  • Page 6

    6 an emission control label is located on the engine. (this is an example only, information on label varies by engine family). Product emission durability the 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emissions output meets app...

  • Page 7

    G rass t rimmer /b rush c utter o perator ' s m anual 7 12 18 11 13 14 15 16 17 19 1 2 5 6 7 8 9 10 4 3 p/n 89016006361 hot decal (near muffler) p/n 89031749030 d escription locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions ...

  • Page 8

    8 1. Power head - includes the engine, clutch, fuel system, ignition system and recoil starter. 2. Grip - rear (right hand) handle. 3. Throttle trigger lockout - this lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged. ...

  • Page 9

    G rass t rimmer /b rush c utter o perator ' s m anual 9 c ontents the echo product you purchased has been partially assembled for your convenience. Due to packaging restrictions, installation of the plastic debris shield, nylon line head, and positioning of the front handle may be necessary. After o...

  • Page 10

    10 tools required: screwdriver, head locking tool, 17x19mm t-wrench parts required: plastic shield, shield plate, three (3) 5mm x 16mm screws, nylon line head plastic shield installation (for nylon line operation) note the plastic shield is for use with the nylon line head only. Install metal shield...

  • Page 11

    G rass t rimmer /b rush c utter o perator ' s m anual 11 front handle installation note label shows minimum spacing for front handle location. 1. Position front handle for comfortable operation and secure screws. Min spacing.

  • Page 12

    12 o peration operation with blades preparing the trimmer/brush cutter for blade use warning danger blade use demands specific brush cutter configuration. Operation without specified shield, harness, and handle can result in serious personal injury. A b c grass/weed blades require: install blade con...

  • Page 13

    G rass t rimmer /b rush c utter o perator ' s m anual 13 plastic/nylon blades may be used where ever the nylon line head is used. Do not use this blade for heavy weeds or brush! 8 tooth weed/grass blade p/n 69600120331 is designed for grass, garden debris and thick weeds. Do not use this blade for b...

  • Page 14

    14 notice: use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the storage section of this manual. Fuel warning alternative fuels, such as e-20 (2...

  • Page 15

    G rass t rimmer /b rush c utter o perator ' s m anual 15 o i t a r 1 : 0 5 - x i m li o o t l e u f . S . U c i r t e m s a g l i o s a g l i o s n o ll a g . Z o .L f r e ti l . C c 1 2 5 6 . 2 2 . 5 3 1 4 8 0 2 0 8 0 6 1 0 0 4 mixing instructions 1. Fill an approved fuel container with half of the...

  • Page 16

    16 starting cold engine warning danger the attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. 1. Stop switch move ...

  • Page 17

    G rass t rimmer /b rush c utter o perator ' s m anual 17 starting warm engine the starting procedure is the same as cold start except do not close the choke, and do not depress throttle trigger to wide open position. Warning danger the attachment should not move at idle, otherwise serious personal i...

  • Page 18

    18 a m aintenance your echo trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an echo service dealer for maintena...

  • Page 19

    G rass t rimmer /b rush c utter o perator ' s m anual 19 maintenance intervals / t n e n o p m o c m e t s y s e c n a n e t n i a m e r u d e c o r p d ' q e r l l i k s l e v e l r o y l i a d e r o f e b e s u y r e v e l e u f e r 3 s h t n o m 0 9 r o s r u o h 6 s h t n o m 0 7 2 r o s r u o h...

  • Page 20

    20 air filter level 1. Tools required: 25 - 50 mm (1 - 2 in.) cleaning brush parts required: 90008 repower tm air & fuel filter kit. 1. Close choke (cold start position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from air cleane...

  • Page 21

    G rass t rimmer /b rush c utter o perator ' s m anual 21 spark plug level 2. Tools required: t-wrench, feeler gauge, soft metal brush parts required: repower tm tune-up kit p/n 90074c important use only ngk bpm-8y spark plug (bpmr-8y in canada) otherwise severe engine damage may occur. 1. Remove spa...

  • Page 22

    22 1. Disconnect spark plug lead from spark plug. 2. Remove (1) screw from top guard (a), and remove guard. 3. Remove (3) screws from engine cover (b), and remove cover. 4. Use the brush to remove dirt form cylinder fins. 5. Remove grass and leaves from the grid between the recoil starter and fuel t...

  • Page 23

    G rass t rimmer /b rush c utter o perator ' s m anual 23 exhaust system spark arrestor screen level 2. Tools required: cross-head screwdriver, soft metal brush. Parts required: spark arrestor screen, gasket 1. Remove engine cover. See “cleaning cooling system” page 20 for instructions. 2. Remove spa...

  • Page 24

    24 cylinder exhaust port level 3 important the cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. Echo strongly recommends that you return your unit to your echo dealer ...

  • Page 25

    G rass t rimmer /b rush c utter o perator ' s m anual 25 lubrication level 1. Tools required: 8 & 13 mm open end wrench, cross head screwdriver, clean rag, grease gun p/n 91016 parts required: echo ® lube tm 8 oz. (p/n 91014) or lithium base grease. Gear housing 1. Clean all loose debris from gear b...

  • Page 26

    26 nylon line replacement level 1. Parts required: echo 2.4mm (0.095 in.) nylon trimmer line 12m (40 feet [two 20 ft. Sections]) echomatic pro trimmer head 1. Do not push spool in. Hold drum and turn spool clockwise until peg clicks and disappears from hole. Pull spool out of drum. 2. Place ends of ...

  • Page 27

    G rass t rimmer /b rush c utter o perator ' s m anual 27 sharpening metal blades three styles of metal blades are approved for use on the echo brush cutter. The 8-tooth blade can be sharpened during normal mainte- nance. The clearing blade and 80 tooth blade require professional service. Before shar...

  • Page 28

    28 t roubleshooting t r a h c g n i t o o h s e l b u o r t m e l b o r p e n i g n e m e l b o r p k c e h c s u t a t s e s u a c y d e m e r e n i g n e - s k n a r c / d r a h s tr a t s t' n s e o d tr a t s r o t e r u b r a c t a l e u f r o t e r u b r a c t a l e u f o n d e g g o l c r e n...

  • Page 29

    G rass t rimmer /b rush c utter o perator ' s m anual 29 s torage warning danger during operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal...

  • Page 30

    30 s pecifications model ----------------------------------------------------- srm-210 length ------------------------------------------------------- 1770 mm (69.7 in.) width -------------------------------------------------------- 250 mm (9.84 in.) height -------------------------------------------...

  • Page 31

    G rass t rimmer /b rush c utter o perator ' s m anual 31 notes.

  • Page 32

    Echo, incorporated 400 o akwood r oad l ake z urich , il 60047 www.Echo-usa.Com consumer product support 1-800-673-1558 8:30 - 4:30 mon - fri c.S.T. Additional or replacement manuals safety manuals in english/spanish or english/french are available, free of charge, from your echo dealer or at www.Ec...