Echo SRM-230 - 11-03 SERIAL NUMBER 07001001-07002988 Operator's Manual

Summary of SRM-230 - 11-03 SERIAL NUMBER 07001001-07002988

  • Page 1

    Grass trimmer/brush cutter operator's manual model srm - 230 serial number 07001001 - 07002988 srm - 230s serial number 07001001 - 07001732 warning danger read rules for safe operation and instructions carefully. Echo provides an operator's manual and a safety manual. Both must be read and understoo...

  • Page 2

    2 i ntroduction welcome to the echo family. This echo product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the safety manual you found in the same package. You will find both easy to use and full of helpful operating tips and sa...

  • Page 3

    G rass t rimmer /b rush c utter o perator ' s m anual 3 important the enclosed message provides information necessary for the protection of the unit. Note this enclosed message provides tips for use, care and maintenance of the unit. This symbol accompanied by the words warning and danger calls atte...

  • Page 4

    4 shaft decal warning danger • this unit can be dangerous and cause serious injury if improperly used. To reduce injury risk to operator, helpers, and bystanders, read and understand the operator's and safety manuals. • blindness can occur from objects that are thrown or ricocheted even with shield ...

  • Page 5

    G rass t rimmer /b rush c utter o perator ' s m anual 5 physical condition -- your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye protect...

  • Page 6

    6 repetitive stress injuries it is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a repetitive st...

  • Page 7

    G rass t rimmer /b rush c utter o perator ' s m anual 7 safe operation warning danger do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the manuals • provide all users of this equipment wit...

  • Page 8

    8 1 2 3 4 5 6 7 8 9 10 safety video 20 11 13 14 15 16 17 18 12 19 d escription the echo product you purchased has been partially assembled for your convenience. Due to packaging restrictions, installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessar...

  • Page 9

    G rass t rimmer /b rush c utter o perator ' s m anual 9 1. Power head - includes the engine, clutch, fuel system, ignition system and recoil starter. 2. Grip - rear (right hand) handle. 3. Throttle trigger lockout - this lever must be held during starting. Operation of the throttle trigger is preven...

  • Page 10

    10 s pecifications models srm-230, srm-230s length ------------------------------------------------------- 1795 mm (70.7 in.) width -------------------------------------------------------- 250 mm (9.84 in.) height ------------------------------------------------------- 250 mm (9.84 in.) weight (dry)...

  • Page 11

    G rass t rimmer /b rush c utter o perator ' s m anual 11 a ssembly plastic shield installation (for nylon line operation) tools required: screwdriver parts required: plastic shield, shield plate, three (3) 5mm x 16mm screws note the plastic shield is for use with the nylon line head only. Install me...

  • Page 12: - O

    12 p re - o peration operation with blades preparing the trimmer/brush cutter for blade use warning danger blade use demands specific brush cutter configuration. Operation without specified shield, handle, and harness can result in serious personal injury. Follow installation instructions included i...

  • Page 13

    G rass t rimmer /b rush c utter o perator ' s m anual 13 c a d choosing the correct blade warning danger the type of blade used must be matched to the type and size of material cut. An improper or dull blade can cause serious personal injury. Blades must be sharp. Dull blades increase the chance of ...

  • Page 14

    14 80 tooth brush blade(p/n 69500120331) is designed for cutting brush and woody growth up to 64 mm (2-1/2 in.) diameter. 22 tooth clearing blade (99944200130) is designed for dense thickets and saplings up to 64 mm (2-1/2 in.) diameter. Use shoulder/waist harness (p/n 99944200200) use of the should...

  • Page 15

    G rass t rimmer /b rush c utter o perator ' s m anual 15 fuel fuel requirements gasoline - use 89 octane [r+m/2] (mid grade or higher) gasoline or gasohol known to be good quality. Gasohol may contain up to 10% ethyl (grain) alcohol or 15% mtbe (methyl tertiary-butyl ether). Gasohol containing methy...

  • Page 16

    16 o peration starting cold engine warning danger the attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. 1. Stop s...

  • Page 17

    G rass t rimmer /b rush c utter o perator ' s m anual 17 starting warm engine the starting procedure is the same as cold start except do not close the choke, and do not depress throttle trigger to wide open position. Warning danger the attachment should not move at idle, otherwise serious personal i...

  • Page 18

    18 m aintenance your echo trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an echo service dealer for maintenanc...

  • Page 19

    G rass t rimmer /b rush c utter o perator ' s m anual 19 air filter level 1. Tools required: cleaning brush 25 or 50 mm (1 or 2 in.) parts required: 90008 repower tm air & fuel filter kit. 1. Close choke (cold start position [ ]). This prevents dirt from entering the carburetor throat when the air f...

  • Page 20

    20 spark plug level 2. Tools required: t-wrench, feeler gauge, soft metal brush. Parts required: spark plug, ngk bpmr-8y p/n a425000000 1. Remove spark plug and check for fouling, worn and rounded center electrode. 2. Clean the plug or replace with a new one. Do not sand blast to clean. Remaining sa...

  • Page 21

    G rass t rimmer /b rush c utter o perator ' s m anual 21 1. Remove spark plug lead. 2. Remove two (2) muffler cover screws and muffler cover (a). 3. Remove screw and top guard (b). 4. Remove engine cover (c). Important do not use a metal scraper to remove dirt from the cylinder fins. 5. Use brush to...

  • Page 22

    22 1. Remove spark plug lead. 2. Remove two (2) muffler cover screws and muffler cover (a). 3. Place piston at top dead center (tdc) to prevent carbon/dirt from entering cylinder. 4. Remove spark arrestor screen cover (b), gasket (c) and screen (d) from muffler body. 5. Clean carbon deposits from sc...

  • Page 23

    G rass t rimmer /b rush c utter o perator ' s m anual 23 note every unit is run at the factory and the carburetor is set in compli- ance with emission regulations. This carburetor does not have acceleration and high speed adjustment needles. 1. Check idle speed and reset if necessary. If a tachomete...

  • Page 24

    24 nylon line replacement level 1. Parts required: echo 0.095 in. Nylon trimmer line 6 m (20 ft.) long. 1. Shut engine off. Lay unit on the ground with head assembly up. 2. Hold drum (a) and firmly turn spool (b) cw (clockwise) until it disengages from the inner drive. Pull spool from drum. Do not p...

  • Page 25

    G rass t rimmer /b rush c utter o perator ' s m anual 25 8. Hold drum (a) firmly and turn spool (b) ccw (counterclockwise) until it stops. Do not push in on spool when turning. 9. Pull both lines out and trim to cut-off knife length. Sharpening metal blades three styles of metal blades are approved ...

  • Page 26

    26 t roubleshooting warning danger fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark near an open spark plug opening, otherwise serious personal injury may result. T r a h c g n i t o o h s e l b u o r t m e l b o r p e n i g n e m e l b o r p k c...

  • Page 27

    G rass t rimmer /b rush c utter o perator ' s m anual 27 s torage warning danger during operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal...

  • Page 28

    Echo, incorporated 400 o akwood r oad l ake z urich , il 60047 www.Echo-usa.Com s ervicing i nformation parts genuine echo parts and echo repower™ parts and assemblies for your echo products are available only from an authorized echo dealer. When you do need to buy parts always have the model number...