Echo TRIMMER ATTACHMENT SRM-261SB Operator's Manual - page 10
10
D
ESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS
1 - Power Head w/Upper Drive Shaft Assembly
1 - Lower Drive Shaft Assembly
1 - Plastic Bag (co-pack)
- 1, Operator's Manual
- 1, Safety Manual
- 1, Warranty Registration Card
- 1, Limited Warranty Statement
- 1, Plastic shield
- 1, Tool Bag
--1, 8 mm x 10 mm Wrench
--1, T-wrench
--1, locking tool
- 1, Nylon Trimmer Head
- 1, Safety Glasses
- 1, 2-Stroke Oil Sample, 2.6 oz.
- 1, Plastic Bag
--1, shield plate
--3, 5mm x 15mm screws (shield mtg.)
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: YEHXS.0254CA
DISPLACEMENT: 25.4
CC
THIS ENGINE MEETS U.S. EPA PH1 AND 2000 AND LATER
CALIFORNIA EMISSION REGULATIONS FOR S.O.R.E.
REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
BLADE
TERMS
AND
DEFINITIONS
--
Blade Convertible
Models (SRM-261SB) can be converted to utilize blades. Plastic/nylon blades require a, "Blade Conversion Kit"
P/N 99944200415, which includes a shoulder harness, and steel shield with necessary attaching hardware. Steel/metal
blades require Combination "U-Handle/Blade Conversion Kit" P/N 99944200521 which includes Blade Conversion Kit
Parts, U-Handle, Throttle Cable and Stop Switch.
EMISSION
CONTROL
California Tier 2
The emission control system for these engines are
EM (Engine Modification).
An Emission Control Label is located on the engine.
(This is an EXAMPLE ONLY, information on label
varies by engine FAMILY).
AIR INDEX TAG
The Air Index Tag indicates, for purposes of
consumer awareness, how this product's
emissions compare to the standards enacted
by the California Air Resources Board.
PRODUCT EMISSION DURABILITY
The 300 hour emission durability period is the time span selected by
the manufacturer certifying the engine emissions output meets
applicable California emissions regulations, provided that approved
maintenance procedures are followed as listed in the Maintenance
Section of this manual.