- DL manuals
- Echo
- Trimmer
- X7522340000
- Safety Manual
Echo X7522340000 Safety Manual - Srm Models:
ENGLISH
SRM Models:
If your trimmer-brushcutter requires assembly
before it can be used, you must make sure the
unit is properly configured for the type of cutting
attachment you will be using. Follow the instructions
in the Operator’s Manual provided with the unit. You
must install the required cutting attachment, debris
shield, handle, and any other protective devices
needed, such as a harness loop and safety harness.
See SRM/PAS/SB Set-Up Guide Page 17)
If your trimmer-brushcutter has been preassembled,
you must make sure the unit is properly configured
for the type of cutting you will be performing. If the
unit is not properly configured, you must first remove
the incorrect parts, and then install the correct parts,
following the instructions in the Operator’s Manual
before using the trimmer-brushcutter,
PAS/SB Models:
Pro Attachment Series (PAS) and Split-Boom
(SB) models are for use only with PAS series
attachments, and must not be used with any other
type or brand of attachment. Select the desired PAS
attachment, and assemble the attachment to the
powerhead driveshaft using the coupler. Follow the
safety and operating instructions in the Operator’s
Manual provided with the attachment, and General
Safety Instructions in this Safety Manual.
SRM MODEL
Front
Handle
Front
Handle
Debris
Shield
PAS MODEL
GT MAXI-CUT BLADE/NYLON LINE HEAD SET-UP GUIDE
TO USE
THESE
CUTTING
ATTACHMENTS
GT Series
Maxi-Cut
Grass/
Weed
Plastic
Cutters
GT Dual
Line
ECHOmatic
Line Head
GT Single
Line
ECHOmatic
Line Head
2 Line
GT Rapid
Loader Line
Head
You
must
install
these
parts!
Front
Handle
Loop Handle (STD)
Debris
Shield
Plastic Shield (STD)
Harness
Not Required
Mounting
Hardware
*
Flat
Washer
Extra
Hardware
Not
Required
Extra
Hardware
Not
Required
Flat Washer
3/8-24 R.H
Thread Hex
Locknut
3/8-24 R.H
Thread Hex
Locknut
Standard Cutting
Line Diameter
N/A
.080
Diameter
.080
Diameter
.095
Diameter
* All required installation hardware provided with cutting attachment
15
ASSEMBLY
Summary of X7522340000
Page 1
English safety manual for grass trimmer, brushcutter and edger danger danger misuse may result in serious or fatal injuries. You must read, understand, and follow these safety instructions, and the instructions in the opera- tor’s manual, before operating a model gt grass trimmer, srm trimmer-brushc...
Page 2: Warning
English warning this manual describes how to protect yourself and others from hazards related to operation of a model gt grass trimmer, model srm trimmer-brushcutter, model pas pro-attachment series unit with attachment, model sb split-boom unit with attachment, and model pe power edger. Before asse...
Page 3: Safety Alert Symbol
English these important safety symbols and warnings are used throughout this manual, and may also appear in your operator’s, attachment, or installation instruction manual. These symbols and warnings are provided to help make you aware of potential hazards, and the precautions you must take to prote...
Page 4: Wear Hand Protection
English read operator's and safety manuals read manuals carefully, and follow rules for safe operation. Failure to do so could result in serious or fatal injury. Wear head, eye, and hearing protection wear head, hearing, and eye protection that meet ansi requirements. Wear hand protection wear heavy...
Page 5: Slip Hazard Alert
English slip hazard alert wear slip-resistant footwear to reduce risk of falls. Operate only with debris shield in place do not operate without correct debris shield. Stop symbol indicates the “stop” position for the engine ignition switch (stop switch). Keep bystanders 15 m (50 feet) feet away keep...
Page 6: Flying Debris Hazard
English flying debris hazard work attachments can throw debris. Flying debris can cause serious injury. Danger zone alert maintain 15 m (50 feet) radius danger zone around trimmer - brushcutter. Metal blade prohibition (use nylon line head only) metal blades cannot be used on unit. Use nylon line he...
Page 7: Danger
English danger gt grass trimmers and srm trimmer-brush cutters are powerful, professional-grade tools designed for applications such as trimming grass and light weeds, and when properly configured (srm/pas/sb /straight shaft only), cutting brush, woody growth, and small saplings and trees. Pas pro a...
Page 8: Physical Condition
English physical condition warning operating this unit while you are impaired can result in serious personal injury or death to yourself and others. Never operate the unit if you are fatigued, or are under the influence of alcohol, medication, or any other substances that can affect your judgment, r...
Page 9: Hearing/ear Protection
English hearing/ear protection echo inc. Highly recommends wearing ansi recognized hearing protection whenever you are operating the unit. Hearing protection prevents hearing loss caused by frequent or prolonged exposure to engine noise. Echo inc. Recommends ear plugs, or for constant heavy-duty use...
Page 10: Leg Protection
English leg protection wear long pants to protect legs from cuts and scratches caused by flying debris. Foot protection wear sturdy shoes or work boots to provide foot protection. Steel-toe shoes or boots provide extra protection against dropped or falling objects. Make sure soles are non-slip for s...
Page 11: Raynaud'S Syndrome
English raynaud's syndrome a condition known as raynaud’s syndrome can occur from exposure to cold and/or vibration. This condition affects the hands and arms, causing tingling, burning, numbness, and loss of color in the fingers. The amount of exposure needed to trigger this is unknown, and varies ...
Page 12: Warning
English warning move stop switch to stop position and disconnect spark plug lead at spark plug before assembling unit. Do not connect spark plug lead to spark plug until unit is properly assembled, checked, and ready for use. Always wear eye protection that meets current ansi z87.1 requirements. Ope...
Page 13: Wiring
English never install any other type of blade, line head, cutting attachment, part, or accessory on your trimmer/brushcutter unless it is approved for use on your specific model. Parts and accessories that appear to fit properly may create a safety hazard when the unit is operated, and could result ...
Page 14: Debris Shield
English debris shield warning plastic debris shields are equipped with a sharp cut-off knife for cutting nylon trimmer line to length during operation. Use extreme care when assembling nylon line head to gear case to avoid accidental contact with cut-off knife. Wear work gloves when assembling nylon...
Page 15: Srm Models:
English srm models: if your trimmer-brushcutter requires assembly before it can be used, you must make sure the unit is properly configured for the type of cutting attachment you will be using. Follow the instructions in the operator’s manual provided with the unit. You must install the required cut...
Page 16: Assembly
English the pro attachment series and split-boom models allow the use of a wide range of attachments to perform various lawn, garden, and landscaping tasks. These attachments have individual safety and operating rules which must be obeyed for safe operation. You must read and understand the safety a...
Page 17: Danger
English srm/pas/sb blade configuration if you change the cutting attachment on your srm, pas, or sb unit from nylon line head to a blade, you must also install all of the parts required for blade operation. These parts vary by type of blade being used, and may include replacing the front handle with...
Page 18: Pe Models
English pe models danger modification, improper assembly, or use of unapproved blades or attachments, can result in serious injury, engine failure, and voiding of warranty. Use only blades and attachments approved for use on pe series power edger models. Assemble unit only as instructed in operator’...
Page 19: All Front Loop Handle Models
English all front loop handle models make sure the front loop handle is positioned beyond the minimum handle spacing line, as shown on the handle spacing decal on the drive shaft housing. The minimum handle spacing line indicates the minimum distance between the rear handle and front handle, and hel...
Page 20: Danger
English danger explosion/fire/burn hazard. Gasoline is extremely flammable. Vapors are explosive. Keep at least 50 feet (15 m) away from heat, sparks, open flame, smoking materials, static electricity, and all other sources of ignition when fueling unit. Gasoline vapor is heavier than air, and can t...
Page 21: Fuel Mix
English • never fill fuel tanks indoors - always fill fuel tanks outdoors over open ground. • do not overfill fuel tank - always allow room in tank for expansion. Fill tank no more than 95 percent full, or to “safe fill line” if marked on container. • always wipe up spills immediately, and dispose o...
Page 22: Danger
English • keep out of reach of children. • if swallowed, do not induce vomiting. Call physician or a poison control center immediately. • wear safety glasses when mixing or handling. • avoid repeated or prolonged skin contact. • avoid inhaling oil mists or vapors. • always wipe up spills promptly - ...
Page 23: E-20
English e-20 e-85 never use raw (unmixed) fuel, or any high-ethanol fuel (ethanol content greater than 10%) such as e20 -e85, in a two-stroke engine. Fuel containers filled with 2-stroke engine fuel/oil mix should be identified as containing fuel/oil mix, and should be stored separately to prevent u...
Page 24: Danger
English danger the operator’s manual for your unit has specific starting instructions for your model and type of engine. For your safety and ease of starting, always follow these starting instructions, and obey the safety rules provided. The cutting head/work attachment on units that require startin...
Page 25: Starting
English • never start a unit near a gasoline container or spilled gasoline. • always move at least 3 m (10 ft.) away from refueling location before starting engine. • if a protective blade cover is used, always remove blade cover before starting unit. Keep blade cover nearby, and place cover back on...
Page 26: Stopping
English the “stop” switch stops the unit by grounding the ignition and preventing the spark plug from discharging a spark. If the stop switch malfunctions and does not stop the unit when required, use the choke to stall the engine to a stop, and have your dealer repair the switch before using the un...
Page 27: General Safety
English general safety danger blade hazard metal blades are extremely sharp, and have powerful cutting action. Contact with moving blades or cutting attachments will cause serious injury. Keep hands, feet, and all other body parts away from moving blades and cutting attachments at all times. Wear wo...
Page 28: Danger Zone
English danger zone careless operation, misuse, improper configuration or assembly, or use of unapproved cutting heads and work attachments can result in serious or fatal injuries to operator and bystanders. Flying debris can cause serious eye injury, loss of sight, or property damage. You must read...
Page 29: Operation
English stop unit immediately if sudden vibration occurs • always use extra care to maintain footing around sloping, hilly, or slippery ground, and around uneven surfaces like steps, raised walkways, edging, and curbs. • always hold the unit firmly with two hands, with thumbs wrapped around the hand...
Page 30: Operation
English grass trimmer & trimmer/brushcutter operation gt/srm/pas units - using nylon line heads warning flying debris line heads rotate at high speed - rotating nylon line can throw debris with sufficient force to cause injury. Keep bystanders and pets out of the “danger zone,” a 50 foot (15 meter) ...
Page 31: Operation
English • always follow instructions provided in operator’s manual or with line head for loading or advancing nylon line. • always wear gloves when handling or reloading a line head that has been in use - the gear case and driveshaft get very hot and can cause burns if touched. Applications nylon li...
Page 32: Danger
English srm/pas brushcutter operation - using metal grass/weed, brush, & clearing blades 15m(50ft) danger sharp blades/powerful cutting action contact with moving blades can cause serious or fatal injury. Keep hands, feet, and all other body parts away from blades. Wear all required personal protect...
Page 33: Hidden Hazards
English • make sure the warning sign on the back of the shoulder harness is properly positioned for easy viewing by others. • wearing hearing protection and engine noise may prevent you from hearing others about to enter the safety zone. Perform regular visual safety checks of the area while cutting...
Page 34: Push and Pull Forces
English • always use blade only for application for which it was intended • always use the correct front handle for the type of blade being used. Echo inc. Recommends using a u-handle for all blade use. Reaction forces - push/pull - kickback/kickout during normal use, operating a brushcutter with a ...
Page 35: Kickout
English kickout kickout is also a reactive force caused by resistance to cutting, but the direction of blade thrust is lateral (to the left or right of the blade), instead of forward or back toward the operator. In most cases, push, pull, and kickout can be reduced or eliminated by: • using the corr...
Page 36: Blade Applications
English blade applications use blades only in recommended applications. • grass/weed blade - use grass/weed blades for cutting thick grasses, weeds, light to medium vegetation, and thick-stalked growth such as reeds and palm grass. • brush blades - use brush blades for cutting dried brush, small sap...
Page 37: Blade Sharpening
English plastic tri-cut blade srm pro maxi-cut gt maxi-cut blade sharpening all blades must be kept sharp for best cutting performance. 8 tooth grass/ weed blades can be sharpened using the instructions in the operator’s manual. Brush and clearing blades require professional sharpening. Improper sha...
Page 38: Warning
English warning edger operation may scatter ground debris that can cause unstable or slippery footing, and increase the risk of slips and falls. Always maintain proper footing and balance while operating edger. Stop unit if necessary, and remove excessive debris from work path before continuing. • a...
Page 39: Prohibition - Edger Blade
English • always use only approved attachments and edger blades. • never operate edger with damaged or missing debris shield. • never adjust edger blade height with engine running. Stop engine, disconnect spark plug lead, and make adjustments. • never carry edger around the work site while the blade...
Page 40: Pas Attachments
English pas attachments danger misuse, improper assembly, or use of unapproved attachments, can result in serious injury, engine failure, and voiding of warranty. Use only attachments approved for use on pro attachment series models. Contact with moving cutting or work attachments can cause serious ...
Page 41: Attachment
English • never use unit within 15 meters (50 feet) of any power lines or wires that may be conducting electricity. Contact with wires carrying electrical current can result in shock or electrocution. • never exceed the cutting capacity of the hedge clippers - forcing the blades to cut materials thi...
Page 42: Pas Power Pruner Attachment
English • always use adjustment handle to hold blade assembly when making adjustments. • always lock blades securely in position before lifting unit off ground. • always check cutting area for hidden wires, fence posts, and other obstacles before starting. • always maintain a line of sight to the cu...
Page 43: Operation
English • never operate a power pruner attachment while on a ladder, in a tree, or on slippery or unstable surfaces. • always make sure that the pruned tree branch or limb can fall safely to the ground after cutting. • never stand under a tree limb or branch during cutting • always keep guide bar co...
Page 44: Pas Pro-Thatch Attachment
English pas pro-thatch attachment misuse, improper assembly, or use of unapproved attachments, can result in serious injury, engine failure, and voiding of warranty. Use only attachments approved for use on pro attachment series models. Contact with moving work attachments can cause entanglement and...
Page 45: Clearing Jams
English • never adjust edger blade height with engine running. Stop engine, disconnect spark plug lead, and make adjustments. Wear work gloves to protect hands from hot surfaces if unit has been in operation. • never allow edger blade to strike concrete or other hard surfaces. Blade contact with con...
Page 46: Warning
English warning operating a poorly maintained unit can result in serious injuries to operator and others. Maintain unit as instructed in operator’s manual. Keep blades sharp and properly adjusted, and replace broken parts immediately. Moving parts can amputate fingers or cause severe injuries. Keep ...
Page 47: Maintenance
English • never reach into any opening while the engine is running. Moving parts may not be visible through openings. • always stop unit immediately and correct any problem if unit does not run properly after performing service or maintenance. Operating a unit that has been improperly repaired may r...
Page 48: Danger
English danger improper storage can result in fire and damage to equipment and property. Follow storage instructions in operator’s manual. Obey all rules for safe fuel handling. Your operator’s manual contains detailed instructions for preparing your unit for storage. Follow the instructions in your...
Page 49: Glossary
English grass trimmer-brushcutter terms term definition air filter filters air used by the engine for combustion. Keeps dirt and dust out of the engine to help extend engine life. Alternative stop procedure procedure used to stall engine if stop switch malfunctions and unit does not stop when switch...
Page 50: Glossary
English clutch engagement speed the engine speed or r.P.M. At which the clutch engages and transmits power to a drive shaft or sprocket. Cotter pin a fastening device used to retain hex nuts on threaded shafts. Also called a split pin. Cultivator attachment a rotating work attachment used on power a...
Page 51: Glossary
English grass/weed blade a blade used to cut soft, light vegetation, such as grass and weeds. Not for use in clearing brush, saplings, or small trees. Gt grass trimmer (curved shaft). Gt models cannot use a metal blade. Harness an adjustable shoulder strap used to support a trimmer or brushcutter. H...
Page 52: Glossary
English quick release latch a latch design that allows a quick separation of the unit from the support harness when there is an emergency. Rapid loader line head a line head that allows rapid nylon line reloading using short, pre-cut pieces of line. Rear handle houses stop switch, throttle trigger, ...
Page 53: Notes
English notes 53.
Page 54: Notes
English notes 54.
Page 55: Notes
English notes 55.
Page 56
English echo incorporated 400 oakwood road lake zurich, il 60047 phone: (847) 540-8400 www.Echo-usa.Com to locate your nearest echo dealer visit our website, http://www.Echo-usa. Com, or call 1-800-432-echo (3246). Ask how to obtain a free safety video. Echo’s supplemental safety video provides help...