- DL manuals
- Echolite
- TV Receiver
- HDC-2210
- User Manual
Echolite HDC-2210 User Manual
Summary of HDC-2210
Page 1
Digital picture, digital sound, digital world of user`s manual english high definition dvb - c set top box hdc-2210
Page 2
Www.Echolite.Com.
Page 3: Table of Contents
Table of contents safety instructions 1 notes 1 warning 1 copyright statement 1 disclaimer 1 introduction 2 main features 2 front panel and rear panel illustration 3 front panel 3 rear panel 3 remote control 4 remote key functions 4 installing the batteries 5 caution 5 using the remote control 5 con...
Page 4: Safety Instructions
1 safety instructions notes warning copyright statement warning: disclaimer • always read the safety instructions carefully • keep this user's manual for future reference • keep this equipment away from humidity • lay this equipment on a reliable flat surface before setting it up. • do not stand it o...
Page 5: Introduction
2 introduction main features this dvb-c tv receiver is a digital cable receiver allowing you to access digital terrestrial paid tv channels and radio broadcasts on your tv set. Its digital reception covers vhf & uhf band. Compared with the analog tv programs, digital tv programs eliminate the noise ...
Page 6
3 front panel and rear panel illustration : used to turn on/off the mains power supply. Led display: used to display the time or channel number. Sensor ：receptor remote. Vol-: to decrease the volume level. Vol+: to increase the volume level. Ch-: to change channels downward. Ch+: to change channels ...
Page 7: Remote Control
4 remote control remote key functions.
Page 8: Installing The Batteries
5 installing the batteries caution using the remote control remove the battery cover from the remote control and put two aaa size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. Keep batteries out of children’s reach. Don’t...
Page 9: Connecting to Equipments
6 1. To use the remote control, point it towards the front of the digital set top box. 2. The remote control has a range of up to 7 meters from the set top box at an angle of up to 60 degrees. 3. The remote control will not operate if its path is blocked. Note: sunlight or very bright light will dec...
Page 10: Connecting to Equipments
7 connecting to equipments connect the tv using scart or av first steps 1. Insert the plugs of the stb and the auxiliary equipment into the socket and turn them on gallows. 2. Select the channel on the television machine av. 3. Channels comes pre-programmed factory to see if there is some new channe...
Page 11: First Time Installation
8 first time installation switch on the unit for the first time channel search ensure all connections have been made following the diagrams on the previous pages for reference. To switch on the set top box, press the power button on the set top box. If you are using the receiver for the first time, ...
Page 12: Basic Operation
9 basic operation change channels 1. Press the numeric buttons (0~9) on the remote control to select the channel you want. 2. Press the ▲/▼button on the remote control/the front panel to change the available channels upward/downward. 3. Press the recall button to view the last viewed channel. Adjust...
Page 13: Teletext and Epg Operation
10 view teletext 1. Press the ttx button to open a teletext page, press again to exit. 2. Press the 4 colour buttons to change the navigation page. 3. Press the ▲/▼ button to change the page upward/downward 4. Press the numeric buttons (0-9) to change your required page. Note: the available teletext...
Page 14: Menu Operation
11 menu operation main menu press the menu button to enter the main menu, press the exit button to exit the main menu. The main menu has 6 items: program, channel search, system, multimedia, conax-ca and information. 1 ．program select the left [program] item by the ▲/▼ button for program manage sett...
Page 15: Menu Operation
12 menu operation 1.2 epg (electronic program guide) the epg menu is used to view the events in the broadcasted programs. The amount of detail depends on the program providers, some only provide now and next information press the epg button to access the epg menu, all the events of the current viewe...
Page 16: Menu Operation
13 menu operation main menu press the menu button to enter the main menu, press the exit button to exit the main menu. The main menu has 6 items: program, channel search, system, multimedia, conax-ca and information. 1 ．program select the left [program] item by the ▲/▼ button for program manage sett...
Page 17: Menu Operation
14 menu operation 3. System select the left [system] item by the ▲/▼ button to config the machine. Press ok to set what you want. Press exit button to exit the menu. 3.1 parental guidance to set the rating level for viewer. The menu is asked to input the pin , the default is “000000”. [g] : general ...
Page 18: Menu Operation
15 menu operation 4. Multimedia to access multimedia. 4.1 multimedia when a usb device is connected with the usb port in the front panel, you can select from the music, photo, movie or pvr options in this menu using the ◄ ► keys and ok to select. If a usb device is not connected, the warning message...
Page 19: Menu Operation
16 menu operation 3. System select the left [system] item by the ▲/▼ button to config the machine. Press ok to set what you want. Press exit button to exit the menu. 3.1 parental guidance to set the rating level for viewer. The menu is asked to input the pin , the default is “000000”. [g] : general ...
Page 20: Menu Operation
17 menu operation 5. Conax ca select the left [system] item by the ▲/▼ button to set the conax-ca or read information about ca. Press ok to set what you want. Press exit button to exit the menu. 5.1 ca entitle to view the current status of the subscription entitlements in the card. 5.2 card paring t...
Page 21
18 tuner & demodulator compliant with dvb-c if bandwidth 8mhz input signal frequency 51～862mhz input signal level 36dbuv～80dbuv（64qam） constellations 16qam/32qam/64qam/128qam/256qam video decoding mpeg-2 mpeg-2 @hl/ml mpeg4 mpeg4 avc h.264 mp@level 4 aspect ratio 4:3 or 16:9 active pixels 1920x1080i...
Page 22: Troubleshooting
19 if you experience problems with this receiver or its installation, in the first instance please read carefully the relevant sections of this user manual and this troubleshooting section. Problem possible cause what to do display on front panel not lit main lead unplugged check mains lead main fus...
Page 23
Www.Echolite.Com.