EchoStar DSB-700 FTA User Manual - page 10
User
’
s Setting
9
User
’
s Settings are only accessible via the Installation screen.
Language Setting
Subtitle
Subtitle
None
Eng
Ita
Select the
“
Subtitle Language
”
in the
“
Language
Setting
”
menu. While viewing a channel, the subtitling
option is available only when the selected subtitling
language is provided by the broadcaster.
To check if the subtitling language is available, press
the
“
”
key on the remote control unit, to show a list
of all available subtitling languages.
You can select a different language for the OSG (On-Screen Graphics) display using the keys when
the
“
Menu Language
”
option is selected. Similarly you can selected a different audio channel when the
“
Audio Language
”
option is selected. This option allows you to select a different language to listen to if
supported.
Language Setting
Menu Language
Main Audio Language English
?
English
?
1
2
2nd Audio Language English
Subtitle Language English
3
4
Exit
i
User
’
s Setting
Local Time Setting
A/V Output Setting
About EchoStar
Language Setting
3
1
4
2
Exit
i
DiSEqC 1.2 Mount
In case you are using a DiSEqC positioner, you should set the
most eastern satellite and the most western satellite you want on
the
“
Position
”
bar.
- Most Eastern satellite : change the satellite name to what you
want for the most eastern satellite on the
“
Satellite
”
bar and
move to
“
Position
”
bar and press the Volume down key(
?
)
until the Signal Level is at the medium level or higher.
And press the OK key to store this satellite as the most eastern
satellite.
- Most Western satellite : change the satellite name to what you
want for the most western satellite on the
“
Satellite
”
bar
and move to
“
Position
”
bar and press the Volume up key(
?
)
until the Signal Level is at the medium level or higher.
And press the OK key to store this satellite as the most western
satellite.
Then, start the
“
Auto Search
”
to search and store the TV channels and Radio channels of the satellite automatically.
LNB
DiSEqC 1.2
Mount
LNB IN