EchoStar DSB-800 2Ci User Manual - page 11
User
’s Setting
10
User
’s Settings are only accessible via the Installation screen.
Language Setting
User
’s Setting
Local Time Setting
A/V Output Setting
About EchoStar
Language Setting
3
1
4
2
Exit
i
Language Setting
Menu Language
Main Audio Language English
? English ?
1
2
2nd Audio Language English
Subtitle Language English
3
4
Exit
i
Subtitle
None
Eng
Ita
Subtitle
Select the
“Subtitle Language” in the “Language Setting” menu. While viewing
a channel, the subtitling option is available only when the selected subtitling
language is provided by the broadcaster.
To check if the subtitling language is available, press
“ ” key on the remote
control unit, to show a list of all available subtitling languages.
DiSEqC 1.2 Mount
LNB
FIXED DISH
DiSEqC 1.2
Mount
LNB IN
In case you are using a DiSEqC positioner, you should set the
most eastern satellite and the most western satellite you want on
the “Position” bar.
- Most Eastern satellite : change the satellite name to what you
want for the most eastern satellite on the “Satellite” bar and
move to “Position” bar and press the Volume down key(?)
until the Signal Level is at the medium level or higher.
And press the OK key to store this satellite as the most eastern
satellite.
- Most Western satellite : change the satellite name to what you
want for the most western satellite on the “Satellite” bar
and move to “Position” bar and press the Volume up key(?)
until the Signal Level is at the medium level or higher.
And press the OK key to store this satellite as the most western
satellite.
Then, start the “Auto Search” to search and store the TV channels and Radio channels of the satellite automatically.
You can select a different language for the OSG (On-Screen Graphics) display using the keys when
the
“Menu Language” option is selected. Similarly you can selected a different audio channel when the
“Audio Language” option is selected. This option allows you to select a different language to listen to if
supported.