Echostreams FlacheSAN1L-D Quick Manual
FlacheSAN1L-D Enclosure Quick Guide
Version 1.00 Release 2014-08-05
1.
Check the content
of the box. Please verify that your
package contains the following:
# Description
Image / Description
Qty
1 1U 20-Bay
Enclosure
1
2 2.5” Tool-less Drive
Trays
20
3 Motherboard
Asrock EP2C602-2T/D16
1
4 Internal SAS cables SFF8087-8087 or SFF8087-
8643 depending on SKU
5
5 Expander board or
OS disk bracket
Depending on SKU
1
6 CPU and memory
(optional)
Pre-installed upon request
2 sets
7 Heat sink
(optional)
2
8 Screw Sets*
for drives, motherboard, and
rail / rack
3 sets
9 Power Cable*
2
10 Rail Kit (optional)
1
11 This Quick Guide
1
12 Packaging box
1 set
* Inside the accessories box. If any items are missing, please contact
your authorized reseller or sales representative
2.
Get familiar with the unit.
Front View
Power Button / LED:
System Status LED:
NIC LED:
(Solid) System Healthy
System On
System Off
Reset Button
AC Power Off
(Blink) System Degraded
(Blink) Non-Critical
Alarm
(Solid) Critical Alarm
ID Button / LED:
ID On
ID Off
20 Drive Bays
Ear Handle
Link UP /Act
Link Down
1
2
Front Panel
Rear View
PCIe Gen3
x16 Slot
Power
Supply B
Power
Supply A
NIC
Ports
USB
Ports
USB
Ports
Mgmt Port
(IPMI)
VGA
Port
PCIe Gen3
x16 Port
Serial
Port
InfiniBand
Ports
Alarm Mute
Button
1
2
Drive Tray
3.
Remove the top cover
by removing the 8 screws on
the top of the unit and slide the cover towards the back of the
unit.
Remove additional 3 screws (blue circles) to open the middle
top cover (for backplane access).
4.
Inspect the internal
of the chassis. By default, it
consists of an Asrock EP2C602-2T/D16 motherboard, a set of
backplanes, blower modules, PCIe riser cards for IO cards, and
an option of an expander module or a drive bracket depending
on the order SKU.
OS HDD bracket location
5 columns
of
backplanes
with one
mini-SAS
connector
and 4 HDD
slots each
PSU
Asrock EP2C602-2T/D16
Motherboard
PCIe Riser Slots
Blower Module x3
Expander Board
Front Panel
See illustration below for the data path from disk devices to
the host. Two options are available: through an expander (red
path), and with no expander (purple path).
For expander mode, a set of SAS cables are routed from
backplanes to expander board and then a choice of routing to
an IO card or an on-board SCU port (SAS2/SATA3 6Gb/s).
IO Card
IO Card with
5 SAS ports
5 SAS UP
Ports
1 SAS DOWN
Port
5 SFF 8087-
8087 SAS
cables
1 SFF 8643 to
8643 or 8087
SAS cable
1 SFF 8643 -
8087 SAS
cable
SCU
Port
5 SFF 8087-
8643 SAS
cables
OR
For a non-expander SKU, in place of expander board, an OS
disk bracket occupies the space. Due to an absence of the
expander board, to access all 20 drives from the front bay, an
IO card with five SAS ports is required, e.g. Adaptec 72405.
Thank you for your purchase of FlacheSAN1L-D 1U 20-Bay Dual-Processor Storage Server!
2.5" 7mm
HDD / SSD
Tray
Drive Lock
(unlocked position)
Tray Latch
Tray Handle
Drive Status LED:
(Solid) Drive Online
To unlock the drive lock:
1. Push the
drive lock
latch
inwards
2. Then pull
it upwards
(Blink) Drive Activity
(Fast Blink) Drive Locate
(Slow Blink) Rebuild
(Solid) Drive Fail
Tool-less drive tray is best used for SSDs.
It is recommended to apply M3 screws when installing HDDs