1 electric telescopic hedge trimmer model hdt01 owner’s manual important: read and understand this manual before assembling or operating this trimmer. Improper use can cause severe injury. Keep this manual for future reference. Any questions or problems – please call the eckman helpline on 0871 590 ...
2 contents i parts list ii- technical data iii-safety instructions iv-getting started v- operation vi- cleaning, maintenance, storage and guarantee. I parts list 1. 450mm long reciprocating heat-treated dual cutter blade 2. Pivoting power head 3. Hand adjustment knob for cutting head 4. Knob release...
3 ii. Technical data rated voltage: 230v- 240v- 50hz input power: 450w idling speed: 1500rpm cutting capacity 14mm diameter weight: 4.5 kg noise and vibration data weighted sound pressure level: 79db weighted sound power level: 96db vibration: 3.5m2/s overall length 1.74m / overall length fully exte...
4 iii. Safety instructions warning: when using electric trimmers, basic safety precautions should always be followed to reduce the risk of personal injury. Read all instructions carefully prior to operating this trimmer. 1. Stay alert---- watch what you are doing. Use common sense when operating tri...
5 2. Be aware of extension cord while operating trimmer. Be careful not to trip over extension cord. Keep extension cord away from cutter blades at all times. 3. Avoid unintentional starting —do not carry plugged-in trimmer with finger on switch. Be sure switch is off when plugging in trimmer. 4. Do...
6 step1: please see pic 2 and pic 3. Line up the shafts and push the male connector pins into the female connection. They will only fit together one way due to the special extrusions on the shaft ends, one of which is slotted as shown in pic3 and the other one which has a protrusion as shown in pic ...
7 adjusting the angle of the trimmer head: pic.6 pic.7 to change the angle of the trimmer head (from 0 – 90 degrees), grip the large red adjustment knob (part3) and depress the grey coloured knob release button as shown in pic 6 & pic 7. When you’ve reach the desired trimmer head position, release t...
8 pic.8 using the trimmer the trimmer is a dual-purpose tool. It is designed to trim and shape tall, hard-to-reach hedges and bushes with its extended reach and pivoting head. You can also adjust the trimmer to trim and shape smaller hedges and shrubs near the ground without having a bend or stoop. ...
9 once the trimmer is cleaned, apply a high coat of oil to the cutter blades to prevent rust and provide lubrication. Maintenance and storage of trimmer 1. Maintain trimmer with care ● keep cutting edge sharp and clean for best performance and to reduce the risk of injury. ● periodically apply a lig...
