User manual manual de instrucciones notice d'utilisation bedienungsanleitung egpa series.
2 graphic symbol explanation the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to person...
3 user manual 1. Important note 04 1.1. Precautions 04 2. Introduction 04 2.1. Main features 04 3. Installation 05 3.1. Placement, mounting, cooling 05 3.2. Mains connection 05 3.3. Input signal connections 05 3.4. Power saving mode 05 3.5. Limiter circuit 06 3.6. Output connections 06 4. Operation ...
4 1. Important note congratulations! You are the owner of a carefully designed and manufactured equipment. We thank you for trusting on us and choosing our amplifier egpa. In order to obtain maximum operativity and perfect functioning order, it is most important to carefully read all considerations ...
5 3. Installation 3.1. Placement, mounting, cooling all egpa amplifier models are presented in standard 19” rack format and are 1 unit high. It is important that the amplifier, as a heat source, is not placed next to other equipment nor exposed to high temperatures. Caution: the built-in convection ...
6 3.5. Limiter circuit this is an extra protection always enabled in the egpa series amplifiers. This circuit dynamically limits the input signal to avoid clipping of loud signals at the amplifier output; it automatically reduces the input level not to exceed approximately 5% distortion. The great u...
7 4.3. Indicators egpa amplifiers include a simple yet effective indication system. Prot/stby indicators (7) show the absence of loudspeaker output signal. These indicators may light up for following reasons: 1. During start-up, until the standby time has passed. This time period is needed for the i...
8 6. Function diagram.
9 7. Function list 1. Sp, signal presence indicator at the ch 1 input 2. Clip, clipping indicator for ch 1 3. Sp, signal presence indicator at the ch 2 input 4. Clip, clipping indicator for ch 2 5. Ch 1 input attenuator 6. Ch 2 input attenuator 7. Prot/stby, overload protection and standby status in...
34 8. Technical characteristics 8. CaracterÍsticas tÉcnicas 8. CaractÉristiques techniques 8. Technische daten egpa2-150 egpa4-150 egpa8-150 power 20-20khz 1% thd 1 channel @ 4 Ω 148 wrms 148 wrms 148 wrms 1 channel @ 8 Ω 74 wrms 74 wrms 74 wrms all channels @ 4 Ω 145 wrms 145 wrms 144 wrms 2 bridge...
35 9. Block diagram 9. Diagrama de bloques 9. Schema de blocs 9. Blockschaltbild egpa2-150 egpa4-150
36 egpa8-150
37 egpa8-150 neec audio barcelona s.L. Motors 166-168, 08038 barcelona, spain internet http://www.Ecler.Com 50.0300.01.00
