Ecler eIC5154 User Manual - page 5
of
8
4
INSTALLA TION
Step 1: measure the mounting hole. It
must be as the cutout size of the
device. Pass the cable through the
cable gland.
Step 2: loose the metal plates and
rise them up to the top. Insert the
back can into the mounting hole.
Step 3: slide down the metal plates
until they reach the surface. Tight
the fasteners inside the back can.
Step 4: connect the audio cable to
the loudspeaker’s terminal block.
Finally, insert the mounting springs
into the hooks and push the
loudspeaker into the back can.