Ecler esas-bt User Manual - page 6
5
STA RT
-
UP
FM
Press SOURCE key to select FM mode.
Automatic search: press A.SCAN to start the automatic channels search. The system
will automatically store available radio stations in presets.
Manual tuning mode: press STEP-/STEP+ to adjust desired FM frequency. You can
also adjust FM frequency by means of RW/FF keys.
Channel selection: press CH-/CH+ to navigate through saved channels (presets). You
can also navigate by means of PREV/NEXT keys.
If you want to access directly to a channel preset, you can use track selection keys:
key 4 will select channel preset 4; if you press key 5+ and then key 4, channel preset
9 (5+4=9) will be selected. If you press 5+ several times, you will be able to select
channel presets with higher index: 5+5+5+1 canal 16.
Volume control: press V- or V+ to increase or reduce the current audio volume.
SD / USB
Press SOURCE key to choose SD or USB mode. If there is no SD card, the display will
show “NO SD”. If files in the SD card are not supported or there are no files, the
display will show “SD LOAD FAIL! “. If there is no USB device, the display will show
“NO USB”. If files in the USB device are not supported or there are no files, the display
will show “USB LOAD FAIL! “.
Play control: press PLAY/PAUSE to start / pause. Use PREV/NEXT to navigate
through tracks. Press RW/FF to rewind / fast forward the current song.
If you want to access directly to a track, you can use track selection keys: key 4 will
select track 4; if you press key 5+ and then key 4, track 9 (5+4=9) will be selected. If
you press 5+ several times, you will be able to select tracks with higher index:
5+5+5+1 canal 16.