Eclipse 307DMK2A Owner's Manual - Jap
−11−
JAP
ANESE
GERMAN
FRENCH
IT
ALIAN
SP
ANISH
ENGLISH
- Assembling the speaker stand -
Align the labels
Speaker
Washer
Hexagonal nut
- Connecting the speaker cable -
Speaker cables
Speaker cables
・
Securely tighten the washer and the hexagonal nut.
・
Be careful not to damage the base of the speaker
when placing the speaker onto the stand.
Caution
When connecting the speaker cables, insert the bare
ends of the speaker cables correctly so that they do not
touch neighboring terminals, otherwise it may cause
short-circuits.
Caution
Align the positioning label on the column with the label
on the base plate.
Tip
If the speaker cables are routed through the cable
guide on the stand when connecting the speaker cables
to the speaker, it will improve the outer appearance of
the speaker. (for diameter of less than 7 mm)
Tip
1
Install the cable guide and column to the base plate with
the hexagonal socket head bolt.
2
Place the speaker onto the column, and then secure it
with the washer and the hexagonal nut.
1
Insert the bare ends of the speaker cable into the holes
in the speaker input terminals and secure them in place.
❹
Cable guide
❶
Column
❷
Base plate
❸
Hexagon socket head bolt
❶
Column
❷
Base plate
⊖ ⊕
Speaker stand
❶
Column
❹
Cable guide