Eclipse 902-480 Instruction Manual - page 6
MAINTENANCE AND SERVICING
Damaged equipment can fail, causing serious personal injury. do not use damaged
equipment. If abnormal noise or vibration occurs, have the problem corrected before
further use.
1.
BEFORE EACH USE, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, and any other
condition that may affect its safe operation.
2.
AFTER USE, depress the release level to activate the piston to the end, clean
external surfaces of the tool with clean, moist, smear the rust preventing oil on the metal
surface of the tool and the dies to avoid rusty. Store the tool in the dry environment.
3.
Service to the tool should only be done by a qualified Service Technician.
4.
in order to prolong the life of the tool please change the oil per year. Make sure the
oil filtered by 120 mesh net or over 30µm strainer. Meantime avoid the dusty into the oil
cup.
5.
HOW TO CHANGE THE OIL
It is best to have the manufacturer do this. The handle must remain in position
shown during filling process or air will be introduced and it will not develop
pressure.