- DL manuals
- Eclipse
- Car Navigation system
- AVN 2227P
- Owner's Manual
Eclipse AVN 2227P Owner's Manual
Summary of AVN 2227P
Page 1
Owner's manual we appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference. In-car audio visual navigation avn2227p.
Page 2
For your safety when using the avn2227p warnings and caution notices, illustrated below, are posted throughout this manual as well as on the avn2227p. They show the safe and correct ways to handle the product so as to prevent personal injury to you and others, and to avoid property damage. Before re...
Page 3
Warning ● do not put foreign objects in the disc loading slot or usb input terminal. Fires or electric shocks may result. ● do not disassemble or alter this main unit. Accidents, fires or shocks may result. ● do not let water or foreign objects enter the internal parts of this main unit. Smoke gener...
Page 4
Caution ● do not touch the heat dissipating part of the amplifier. Burns may result from the heat of this part. ● if alkaline solution from alkaline dry batteries makes contact with your skin or clothes, flush clean with water. If any of the solution gets in your eyes, also flush clean with water an...
Page 5
Operating precautions notes on operation • for your safety, play only at moderate volumes so that you can still hear exterior sounds. • discs with the logo shown to the left can be played. • you can play music cds (cd-r/cd-rw) on this player. Be sure to use discs that have been properly processed. D...
Page 6
Basic operation adjusting the sound muting the volume to cancel muting, either press the [mute] button again or turn the [vol] rotary knob to the right. While the audio system is muted, navigation voice guidance continues unmuted. Setting guide tone right : on left : off 1 press the [mute] button. 1...
Page 7
Switching audio control modes bass mid treb bal fad non-f nf-p lpf loud svc vol bass ... Turn the [vol] rotary knob to the right or left in the audio mode while referring to the table below to adjust the sound. 1 the modes will switch one step in the order shown below each time the [enter] button is...
Page 8
Lpf (low pass filter for sub-woofer output) adjusts frequency filtering settings. Turn to the right lpf on : only allows lower frequencies (low range) through. Turn to the left lpf off : allows all frequencies through regardless if the frequencies are low or high. Loud (loudness) accentuates low and...
Page 9
Telephone muting function when you receive an incoming phone call, the volume of the audio function is reduced to zero. This function is effective when the car telephone is connected to the main unit with a cable. Upon receiving a telephone call, the sound muting function comes on. When the mute fun...
Page 10
Switching between left and right speaker output for the navigation voice voice guidance speaker output can be switched between the right and left speakers. Right left right: output from the right front speaker left: output from the left front speaker selecting the dimmer setting in order to make the...
Page 11
Using the audio cover using the audio cover after removing the pnd from the main unit, it is recommended that you use the optional audio cover which comes with trk-107p* to prevent the connector from stain. * trk-107p: sold separately how to insert the audio cover engage the catch at the left end of...
Page 12
How to detach the audio cover from the main unit the right end of the audio cover detaches from the body of the main unit. Hold the audio cover on the right side, lift up and pull it toward you to remove it. Attention if the audio cover gets wet, do not attach it to the main unit. 1 press the [relea...
Page 13
How to operate the tuner calling up preset channels the registered preset channel will be selected and the corresponding station will be received. Six stations can be memorized for each of fm 1, 2 and 3, and six stations can be memorized for am, making a total of 24 stations. Calling up a preset cha...
Page 14
The selected station is memorized and the preset registration number and frequency are indicated on the display. To manually set additional selected stations for the remaining preset channels, repeat this procedure for each channel. If the stations have been stored in memory, selecting the preset ch...
Page 15
Attention • pressing the preset switches ([1] to [6]) allows you to make one-touch station selections. The frequency of the selected station is displayed on the preset switch. • when a new station is set in memory, the station previously set in memory will be deleted. • if there are fewer than six r...
Page 16
How to operate the cd/mp3/wma player about compact discs • the signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause impaired sound quality or intermittent playback. Observe the following pre...
Page 17
• do not use a cd with glue or remnants of adhesive tape or labels adhering to it. They may cause the cd to get stuck inside or damage the main unit. About cleaning a cd • do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for "improving sound performance" or "pro...
Page 18
About mp3/wma attention the making of mp3/wma files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is mp3/wma? Mp3 (mpeg audio layer iii) is a stan...
Page 19
Media the media capable of playing mp3/wma include cd-r and cd-rw discs. Compared to the cd- rom media commonly used for music discs, cd-r and cd-rw discs are fragile in high temperature/high humidity environments and one section of the cd-r and cd-rw may become incapable of playback. Fingerprints o...
Page 20
Multi-sessions multi-sessions are supported, and cd-r and cd-rw discs with annotated mp3/wma files can be played. However, when "track at once" has been written, close the session or process the warning message. Use the same format for each session (don’t change the format). Playing mp3/wma when a d...
Page 21
Writing to a cd-r/cd-rw mp3/wma files can be recorded on cd-r/rw by using a cd-r/rw drive connected to a computer. Record by setting the recording format of the recording software to iso9660 level 1 or level 2 (not including the extension format). Select cd-rom ( mode1 ) or cd-rom xa ( mode2 ) for t...
Page 22
Skipping to the next track (file)/returning to the beginning of a track (file) right: advances to the next track (file). Left (pressing once): returns to the beginning of the track (file) being played. Left (pressing more than two times): returns to the previous track (file). Fast forward/rewind rig...
Page 23
Rand one... Play the files in the folder being played in a random order. Rand all... Play the files in all folders in a random order. Repeat track right: on left: off the track being played is played again. Repeat file/folder press the [select(right/left)] button to switch the mode in the following ...
Page 24
Scan files/folders press the [select(right/left)] button to switch the mode in the following sequence: right: scan all left: scan one scan all... Play the first ten seconds of the first file in each folder. Scan one... Sequentially play the first ten seconds of all files in the folder being played a...
Page 25
When an mp3/wma file is playing press and hold the [tp/text] button to switch the screen's display pattern in the following sequence: folder name/file name artist/title folder no. /file no. Playing time folder name/file name ... Attention • if the cd came with the logo shown below, it is recorded wi...
Page 26
How to operate the usb music file player about playable usb memory standards • supported file system: fat 16/32 • playable audio format: mp3 • max.Current: 500ma • compatibility: usb1.1/2.0 (maximum transmission speed equivalent to usb 1.1: 12 mbps) • correspondence: usb mass storage class (playing ...
Page 27
Skipping to the next file/returning to the beginning of the file right: advances to the next file. Left (pressing once): returns to the beginning of the file being played. Left (pressing more than two times): returns to the previous file. Fast forward/rewind right: fast forward. Left: fast rewind. 1...
Page 28
Random file order (shuffle songs) all music files in the usb memory are played in random order. Repeat song the music file currently being played is repeated. 1 touch "preferences". 2 touch "shuffle songs ". 1 touch "preferences". 2 touch "repeat song "..
Page 29
File search the selected file in the usb memory is played. If and are displayed, you can change the displayed page of the music file list by touching them. You can search for a file name or the name of an artist by touching "find". 1 touch "select". 2 touch "playlist", "artist", "album", "song" or "...
Page 30
You can search for a music file by entering alphanumeric characters. Caution • music files in the usb memory can be played only when the pnd is attached to the main unit. • do not remove the usb memory without first switching the display to the audio screen and then touching the switch. Loss of data...
Page 31
How to operate with an ipod ® an ipod can be connected to the main unit using an optional dedicated connection cable, allowing you to listen to ipod music files and operate some ipod functions from the main unit. An ipod is for legal or right-holder-authorized copying only. Don't steal music. Ipod i...
Page 32
Repeat song the ipod music file being played will be played again. File search 1 touch "preferences". 2 touch "repeat song ". 1 touch "select". 2 touch "playlist", "artist", "album", "song" or "genre". Song title artist name album name.
Page 33
The selected file in the ipod will be played. If and are displayed, you can change the displayed page of the music file list by touching them. You can search for a file name or the name of an artist by touching "find". You can search for a music file by entering alphanumeric characters. 3 touch the ...
Page 34
How to operate the portable audio player use an optional aux105 to connect a portable audio player to the main unit. Switching the aux mode on and off "audio off " is displayed on the pnd display. On the sub display "good bye" will be momentarily displayed and then "all off". Aux on aux off attentio...
Page 35
Things you should know if one of these messages appears if any of the following messages is displayed on the sub display, check the equipment while referring to the cause and corrective action columns. Messages cause corrective action cd/mp3 reading ... Main unit is reading disc wait until the messa...
Page 36
Before asking for repairs slight differences in operation can sometimes be mistaken for malfunctions, so check the following table before asking for any repairs. If the following fail to solve the problem, contact the place of purchase. Error2 ipod software not supported ・ make sure that the softwar...
Page 37
*: depending on your mobile phone, the mute function may not work correctly. If it doesn't, press the [mute] button on the main unit. Also, refer to the eclipse web site whose address is given below for details on applicable phone models. (http://www.Eclipse-web.Com/eu/) a cd cannot be played. There...
Page 38
Specifications power supply 13.2v dc (11-16v) current drain 3a dimensions (whole unit) (w x h x d) 7" x 4" x 6-1/2" (180 x 100 x 165mm) weight (whole unit) 5.5lbs (2.5kg) dimensions (pnd only) (w x h x d) 4" x 3" x 1" (101 x 76.1 x 23.3mm) weight (pnd only) 0.4lbs (0.2kg) operating temperature range...
Page 39
Power output 14w x 4 (20hz~20khz, 1% thd, 4 Ω , vcc=14.4v) max. 50w x 4 output level/impedance 3v/55 Ω line-out impedance loudness +9db at 100hz/+6db at 10khz.
Page 40
How to contact eclipse fujitsu ten limited contact: fujitsu ten (europe) gmbh mündelheimer weg 39,40472 düsseldorf f.R.Germany.