1. DL manuals
  2. Eclipse
  3. Digital Camera
  4. BEC105
  5. Installation Manual

Eclipse BEC105 Installation Manual

Other manuals for BEC105: Brochure
Manual is about: HDD Series DVD Series

Summary of BEC105

  • Page 1

    1 be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional techniques and experience are required in order to instal...

  • Page 2: Rear Camera Components

    2 waterproof cushion x 1 7 harness affixing tape x 2 6 ※ rear camera x 1 1 bracket x 1 2 screw (m3x6)x 2 3 rear camera components double-sided tape (spare) x 1 4 cable rail x 6 5 components components check that all of the following components are present check that all of the following components a...

  • Page 3

    3 •• bundle cables and harnesses with electrical tape or wire ties to prevent them from interfering with moving parts. If they should entangle with the steering wheel, shift lever or brake pedal, an accident may result. •• do not disassemble or rebuild this product. Doing so may cause an accident, f...

  • Page 4

    4 p p oints to note after installing the rear camer oints to note after installing the rear camer a a - method of use - •• do not place too much reliance on the back-eye camera. •• the backeye camera is meant to be used as a supplementary aid to help in avoiding obstructions. •• if the lens is obscu...

  • Page 5

    5 installation diag installation diag r r am am rear camera cable rear camera 1 3-28510 bec105 a5版（英語） 05.8.23 6:46 pm ページ5.

  • Page 6: Notes On Installation

    6 notes on installation • check the installation position prior to installing to ensure that the rear camera and the camera cable does not interfere with the opening and closing of the back door. • do not peel the double-sided tape away from its backing paper. Tip • the cables should be secured with...

  • Page 7: Tip

    7 decide on the installation position for the rear camera. １ - if installing underneath a rear spoiler (example) - - if installing directly to the back door (example) - front of vehicle note the following when deciding on the installation position for the rear camera. • provisionally attach the rear...

  • Page 8: Tip

    8 - if installing underneath a rear spoiler (example) - pull the rear camera cable inside the back door while securing it with the cable rails and commercially-available clamp. 5 front of vehicle cable rail 5 cable rail 5 rear camera 1 clamp • the cable rails should be cut to appropriate lengths. Ti...

  • Page 9: Tip

    9 – if installing underneath a rear spoiler (example) – wipe the installation surface free of any dirt, water or grease. 6 peel off the backing paper from the double-sided tape on the bracket, and affix the bracket to a flat part of the back door. 7 • after affixing the bracket, push the bracket fir...

  • Page 10: Tip

    10 weatherstrip • confirm that the rear camera cable does not get pulled and that the cable ties and clamps do not come off when the back door is opened and closed. • take care when routing the cable through the trunk to ensure that rainwater cannot get inside the vehicle. Front of vehicle clamp rou...

  • Page 11: Tip

    11 camer camer a angle adjustment a angle adjustment • when adjusting the camera images, apply the vehicle's parking brake and be sure to chock the wheels of the vehicle so that the vehicle will not move, otherwise accidents or injuries may occur. After connecting the rear camera cable to the main u...

  • Page 12: Tip

    12 system connection e system connection e xample xample • never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • the cables should be bound together with tape or with a ...