Eclipse CD2000 Owner's Manual - Listening To Cd (Mp3 File)

16

Operation

Listening to CD (MP3 file)

The CD will immediately start playing.

ATTENTION

When a CD is already loaded, press the

[DISC] button to switch to the CD mode.

Switching to the CD player 

mode

First press the [DISC] button for less than one

second to switch to the disc mode. It is assumed

here that a CD has already been loaded into the

unit.

This starts CD play.

If an external CD changer and iPod is

connected, each additional press of

the [DISC] button will switch modes

from CD player 

➔

 CD changer 1 

➔

CD changer 2 

➔

 CD player.

A changer or player with no discs

loaded will be skipped.

ATTENTION

• Playback may be intermittent when there is

a scratch on a CD or when the recorded

side is dirty.

• Only two external CD changers may be

connected.

1

Insert a CD into the disc slot, label

side up.

● Note ●

• When music data recorded in

the normal way (CD-DA) is

present on the same disc with

MP3 music files, the normally

recorded music data will be

played. To listen to the MP3

music files, press the button [3]

for more than one second.

• The optional CD changer

cannot be used to play MP3

files.

1

Press the [DISC] button for less

than one second to switch to the

CD player mode.