1. DL manuals
  2. Eclipse
  3. Speakers
  4. D3II
  5. Owner's Manual

Eclipse D3II Owner's Manual

Summary of D3II

  • Page 1

    Ja p anese german french it alian s p anish english speaker stand (for td508 Ⅱ speaker only) thank you for purchasing this high quality speaker stand. Please read this installation manual before assembling the stand, and be sure to use it properly. An accident or injury can result if the stand is in...

  • Page 2: Anese

    - 2 - ja p anese english g erman f rench it alian s p anish d3 Ⅱ Ⅱ components joint x1 1 post x1 2 base plate x1 3 hexagonal bolt x2 4 spike hole seal x5 7 foot x5 8 pan-head bolt x1 5 allen key x1 6 included p included p ar ar ts ts check that all of the following components are present check that ...

  • Page 3: Anese

    - 3 - • • this stand is meant for use with the td508 Ⅱ speaker or td510 speaker. Do not use the stand for other purposes. Improper use of the stand can result in an unstable condition with the potential to cause an injury by falling. • • assemble the stand on a level surface. Placing the stand on an...

  • Page 4: Anese

    - 4 - ja p anese english g erman f rench it alian s p anish the speaker is heavy, so hold it with both hands when removing it. Speaker remove the angle adjustment screw and the washer. 3 slide the speaker to the right and then lift it up to remove it. 4 screws x4 base cover speaker washer joint angl...

  • Page 5: Anese

    - 5 - - assembling the speaker stand (for d3 Ⅱ) - install the base plate and the post with the pan-head bolt. 1 pan-head bolt hexagonal bolt speaker insert the hexagonal bolt (speaker turn-prevention bolts) into the joint. 2 assemble the joint and the post with the hexagonal bolt. 3 washer angle adj...

  • Page 6: Anese

    - 6 - ja p anese english g erman f rench it alian s p anish - assembling the speaker stand (for d6) - install the base plate and the post with the pan-head bolt. 1 2 assemble the joint and the post with the screw (binding). 3 speaker washer angle adjustment screw speaker stand place the insulator un...

  • Page 7: Anese

    - 7 - ja p anese german french it alian s p anish english - routing speaker wire - when connecting the speaker wire, connect it securely so that the end of the speaker wire does not touch any neighboring terminals. 1 speaker wire - speaker angle adjustment - loosen the angle adjustment screw on the ...

  • Page 8: Anese

    - 8 - ja p anese english g erman f rench it alian s p anish.