Eclipse EC-P10 Installation Manual - page 37
P0016-LI-02.01
37
4
Report Channel 4/12
On: For location 7201 channel 4 is enabled, for location 7241
channel 12 is enabled.
Off: For location 7201 channel 4 is disabled, for location 7241
channel 12 is disabled.
5
Report Channel 5/13
On: For location 7201 channel 5 is enabled, for location 7241
channel 13 is enabled.
Off: For location 7201 channel 5 is disabled, for location 7241
channel 13 is disabled.
6
Report Channel 6/14
On: For location 7201 channel 6 is enabled, for location 7241
channel 14 is enabled.
Off: For location 7201 channel 6 is disabled, for location 7241
channel 14 is disabled.
7
Report Channel 7/15
On: For location 7201 channel 7 is enabled, for location 7241
channel 15 is enabled.
Off: For location 7201 channel 7 is disabled, for location 7241
channel 15 is disabled.
8
Report Channel 8/16
On: For location 7201 channel 8 is enabled, for location 7241
channel 16 is enabled.
Off: For location 7201 channel 8 is disabled, for location 7241
channel 16 is disabled.
Fast Format: Restore Channels
When the ARC protocol is programmed as Fast Format, the
channels that report a restore event can be enabled or disabled.
Locations:
7202
- Restore Channels 1 – 8.
7242
- Restore Channels 9 – 16.
Entry Mode: Bit Toggle Selection (see page 17).
1
Restore Channel 1/9
On: For location 7202 channel 1 is enabled, for location 7242
channel 9 is enabled.
Off: For location 7202 channel 1 is disabled, for location 7242
channel 9 is disabled.
2
Restore Channel 2/10
On: For location 7202 channel 2 is enabled, for location 7242
channel 10 is enabled.
Off: For location 7202 channel 2 is disabled, for location 7242
channel 10 is disabled.
3
Restore Channel 3/11
On: For location 7202 channel 3 is enabled, for location 7242
channel 11 is enabled.
Off: For location 7202 channel 3 is disabled, for location 7242
channel 11 is disabled.
4
Restore Channel 4/12
On: For location 7202 channel 4 is enabled, for location 7242
channel 12 is enabled.
Off: For location 7202 channel 4 is disabled, for location 7242
channel 12 is disabled.
5
Restore Channel 5/13
On: For location 7202 channel 5 is enabled, for location 7242
channel 13 is enabled.
Off: For location 7202 channel 5 is disabled, for location 7242
channel 13 is disabled.
6
Restore Channel 6/14
On: For location 7202 channel 6 is enabled, for location 7242
channel 14 is enabled.
Off: For location 7202 channel 6 is disabled, for location 7242
channel 14 is disabled.
7
Restore Channel 7/15
On: For location 7202 channel 7 is enabled, for location 7242
channel 15 is enabled.
Off: For location 7202 channel 7 is disabled, for location 7242
channel 15 is disabled.
8
Restore Channel 8/16
On: For location 7202 channel 8 is enabled, for location 7242
channel 16 is enabled.
Off: For location 7202 channel 8 is disabled, for location 7242
channel 16 is disabled.
Fast Format: Open/Close Channels
When the ARC protocol is programmed as Fast Format, the
channels that report an Open/Close event can be enabled or
disabled.
Locations:
7203
- Open/Close Channels 1 – 8.
7243
- Open/Close Channels 9 – 16.
Entry Mode: Bit Toggle Selection (see page 17).
1
Open/Close Channel 1/9
On: For location 7203 channel 1 is enabled, for location 7243
channel 9 is enabled.
Off: For location 7203 channel 1 is disabled, for location 7243
channel 9 is disabled.
2
Open/Close Channel 2/10
On: For location 7203 channel 2 is enabled, for location 7243
channel 10 is enabled.
Off: For location 7203 channel 2 is disabled, for location 7243
channel 10 is disabled.
3
Open/Close Channel 3/11
On: For location 7203 channel 3 is enabled, for location 7243
channel 11 is enabled.
Off: For location 7203 channel 3 is disabled, for location 7243
channel 11 is disabled.
4
Open/Close Channel 4/12
On: For location 7203 channel 4 is enabled, for location 7243
channel 12 is enabled.
Off: For location 7203 channel 4 is disabled, for location 7243
channel 12 is disabled.
5
Open/Close Channel 5/13
On: For location 7203 channel 5 is enabled, for location 7243
channel 13 is enabled.
Off: For location 7203 channel 5 is disabled, for location 7243
channel 13 is disabled.
6
Open/Close Channel 6/14
On: For location 7203 channel 6 is enabled, for location 7243
channel 14 is enabled.
Off: For location 7203 channel 6 is disabled, for location 7243
channel 14 is disabled.
7
Open/Close Channel 7/15
On: For location 7203 channel 7 is enabled, for location 7243
channel 15 is enabled.
Off: For location 7203 channel 7 is disabled, for location 7243
channel 15 is disabled.
8
Open/Close Channel 8/16
On: For location 7203 channel 8 is enabled, for location 7243
channel 16 is enabled.
Off: For location 7203 channel 8 is disabled, for location 7243
channel 16 is disabled.