Eclipse TD712Z Owner's Manual

Summary of TD712Z

  • Page 1

    Thank you for purchasing the eclipse td speaker 712z. Please read this owner’s manual before use. Be particularly sure to read the important safety instructions section. Keep this owner’s manual together with the warranty certificate in a safe place for later reference. Owner's manual.

  • Page 2: Foreword

    − 12 − english foreword ■ contents important safety instructions ……………………………………………………………………… 13 notes on use ………………………………………………………………………………………… 14 part names and functions/connections ………………………………………………………… 15 assembly instructions ……………………………………………………………………………… 16 maintenance/specifications …………………...

  • Page 3: ■

    English − 13 − important safety instructions ■ before use the warnings contained within this instruction manual and on the unit itself are to ensure safe and correct use of the unit and thus prevent injury to our customers or other people and damage to property. Please read and understand the warnin...

  • Page 4: Notes On Use

    − 14 − english notes on use ■ before turning the unit on or changing the input source, be sure to set the volume to low. Sudden bursts of loud noise may cause damage to any connected speaker systems. ■ to avoid disturbance in your neighborhood, enjoy your unit at an appropriate volume. Remember that...

  • Page 5: ②

    English − 15 − part names and functions/connections ①、 、② speaker input terminals when connecting the speakers, insert the ends of the speaker cables so that they do not touch neighbouring terminals or other parts. ② + ① − speaker cable.

  • Page 6: Assembly Instructions

    − 16 − english assembly instructions ① place the stand in the desired location. ② as shown in the diagram, mount the speaker on the stand, constantly checking the alignment. ③ using the hexagonal wrench with the hexagonal socket head bolts and washers, fasten the speaker to the stand (3 places). [ 1...

  • Page 7

    English [ 4 ] adjusting the speaker angle ① using the hexagonal wrench, loosen the hexagonal socket head bolts (3 places). ② using the hexagonal wrench, turn the angle adjustment screw. ③ when finished, use the hexagonal wrench to tighten the hexagonal socket head bolts. To secure the speaker, first...

  • Page 8

    − 18 − english [ 5 ] installation of protective cover. ① as shown in the diagram, install the protective cover. ③protective cover the protective cover may be attached when the speaker is not in use or at the user ユ s discretion. Advice.

  • Page 9: Maintenance / Specifications

    English − 19 − maintenance / specifications ■ specifications specifications and appearance are subject to change without prior notification. ● td712z diameter: φ 12cm type: bass ref/box input resistance: rated 35w / maximum 70w impedance: 6 Ω dimensions: 347mm(w)x384mm(d)x988mm(h) weight: 32kg ■ mai...

  • Page 10: ■

    − 20 − english ■ when requesting a repair within warranty period present your warranty certificate repairs will be carried out in accordance with the conditions on the warranty certificate outside the warranty period when a repair is possible, it will be carried out upon your instruction and at your...

  • Page 11

    − 61 − 切り取り cut and remove ausschneiden und entfernen découpez et retirez tagliare e rimuovere recorte y retire 角度調整ねじ先端 tip of the angle adjustment screw spitze der winkeleinstellschraube pointe de la vis de réglage d'angle punta della vite di regolazione dell'angolazione punta del tornillo de ajus...

  • Page 12

    − 62 −.

  • Page 13

    − 63 −.

  • Page 14

    090001-14710700 0306mt(f.Ki).