Eco Air ECO1230SDN User Manual - page 15
____________________________________________________________________________________
15
2.
Take hold of the handle of
the air filter and lift it up
slightly to take it out from the
filter holder, and then pull it
downwards.
3.
Remove the AIR FILTER
from the indoor unit.
Clean the AIR FILTER once
two weeks.
Clean the AIR FILTER with a
vacuum cleaner or water, and
then dry it up in cool place.
4.
Remove the air freshening
filter from its support frame.
Clean the air freshening filter at
least once a month, and replace
it every 4-5 months. Clean it with
vacuum cleaner, and then dry it
in cool place.
5.
Remove the Plasma dust
collector from its support
frame as shown in the Figure
on the left (on some models).
Do not touch the Plasma dust collector
within 10 minutes after opening the inlet
grill; it may cause an electric shock.
Clean the Plasma dust collector
with mild detergent or water and
dry in the sunlight for two hours.
Before re-install the Plasma dust
collector, check whether the
Nouveau or support frame is
damaged or not.
6.
Install the air freshening filter
back into position.
7.
Insert the upper portion of air
filter back into the unit taking
care that the left and right
edges line up correctly and
place filter into position.
CAUTION
•
Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
sharp metal edges.
•
Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to possible electric shock.
•
When cleaning the unit, first make sure that the power and circuit breaker are turned off