Eco-Feu MONTREAL Installation And Operation Manual - Free Standing Installation
Page 7 of 9
Free Standing Installation
1. Anchorage
a. Taking into account the General Safety Precautions and Installation Requirements mentioned
above, designate an appropriate location for your free standing unit.
b. Attach the Free Standing mounts(1) to the base of the unit using the included screws(2) into
the designated wholes
c. Use the proper screws and washers to anchor the base of the unit via screw holes (a) to the
floor. Make sure it is properly anchored.
2. Burner Installation
a. Place the burner(4) into the overflow container(3). Make sure the burner is stable and levelled
with the control arm on the correct side.
b. Remove the control arm handle(7) by unscrewing it. Carefully place the overflow container(3)
into the designated slot(e).
c. The control arm should now be sticking out of the bottom of the unit (5). Reattach the control
arm handle by screwing it in firmly.
d. Make sure the burner shutter, opens and closes smoothly by moving the control arm shutter
handle left and right.
3. Protective Glasses
a. Place the protective glasses(8 & 6) on the glass mounts(c).