Eco LED40 User Manual - Eco Spot
ECO Spot
TM
LED40 User Manual
Copyright © 2014 Sunhope Inc
Page
2
of
4
Handling Instructions
•
Before the initial start-up, please unpack and carefully check for damage caused during transportation.
•
Place your fixture at a suitable place with good air flow.
•
Make sure there are no flammable materials close to the lamp.
•
When suspending the fixture above ground level, verify that the structure can hold at least 10 times the weight
of all installed devices.
•
Verify that all external covers and rigging hardware are securely fastened and use an approved means of
secondary attachment such as a safety cable.
Warranty
One Year from Date of Purchase.
Focusing
•
Power up the projector by pressing the larger switch in the back.
•
Turn on the gobo rotator with the smaller switch in the back and switch it off when the gobo projects in the
desired position.
•
Focus the projection by twisting the lens in and out until the image is well focused. When used for the first time,
the lens will often need to be twisted outwards many rotations to reach the focusing point.
Lens Options
•
The projector accommodates interchangeable projection lenses to allow optimizing the projection size and
resulting brightness at varying distances. The more narrow the lens, the smaller and brighter the image will be
at a given distance.
•
Standard 20 degree (default)
•
Optional lenses : Semi Narrow 15 degree and Semi Wide 25 degrees
Gobo Rotator
•
The gobo rotator can be turned on/off with the red push-button switch on the back plate.
•
There are no controls for rotating speed or direction.
Multi-functional Yoke
•
The yoke can slide over the whole length of the fixture body to accommodate multiple pointing directions.
•
The yoke serves as stand.
•
The yoke can be screwed to a wall or ceiling or fastened with a C-clamp.