Eco Steam Master User Manual - Operating Instructions
With the square attachment facing downwards and the blade from the scraper facing
upwards, slot the top of the scraper attachment into the ridges at the end of the square
attachment. Then, press down on the tab so the bottom part clicks into place. (see Pic13.
Pic14.Pic15)
Pic13 Pic14 Pic15
Operating instructions
To add water to the unit:
Unscrew the tank knob and use the measuring cup to
add clean water to the tank (see Pic16). Please ensure
that the tank is refilled when there is little water
remaining so that the steam function is not affected. Do
not add any detergent or aroma oil in order to avoid
blocking the steam nozzle.
Attention: You can push the cleaning stick (part 15) through the nozzle hole to clean
the unit.
Pic16
Once the unit has been assembled as either the steam mop or handheld unit, plug the
power cord into the socket and press the power switch on. The power indicator will then
light up. After 30 seconds of pre-heating, steam will start to emit from the unit and the
product is ready to operate.
You can adjust the steam level according to different requirements:
1) Low and medium
Ideal for cleaning carpets and rugs. (short pile)
For best result, use the non-woven cloth.
2) High
Ideal for cleaning all hard floors such as tiles, linoleum, marble.
For best results, use the microfibre cloth.
3) Hot Spray
Ideal for cleaning bathrooms, kitchen worktops, ovens. (window sills, car wheels,
patios etc.)
For best result, use this setting for the handheld unit.