Ecoair Bravo ECO1216SD MK2 Installation and operation manual

Manual is about: Bravo Inverter Range Split Type DC Inverter

Summary of Bravo ECO1216SD MK2

  • Page 1

    Installation and o peration m anual room air conditioners bravo inverter range split type dc inverter eco916sd mk2 eco1216sd mk2 eco1816sd mk2 eco2416sd mk2 register your air conditioner model information can be found on the ce label. Please register your product online at www.Ecoair.Org. For your f...

  • Page 2: What’S In The Box

    What’s in the box 1 x bravo inverter mk2 indoor unit 1 x bravo inverter mk2 outdoor unit 1 x remote control 1 x drain hose 1 x user manual 1 x hole cover plate 1 x drain joint 4 x wall plugs and screws. 1 set of copper pipes this appliance is not intended for use by persons (including children) with...

  • Page 3: Content

    Content operation notices parts ......................................................................................................................2 precautions............................................................................................................3 screen operation guide butt...

  • Page 4

    Bs plug wiring wiring instructions: should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code: blue - neutral brown – live green and yellow - earth as the colours of the wires in the mains lead of this appliance may not corre...

  • Page 5: Parts

    2 parts outdoor unit air inlet handle air outlet notice: actual product may be different from above graphics, please refer to actual products. (display content or position may be different from above graphics, please refer to actual products) indoor unit air inlet panel horizontal louvre air outlet ...

  • Page 6: Precautions

    3 precautions warning Ɣ'rqrwfrqqhfwwkhdlufrqglwlrqhuwrdpxowlsxusrvhruh[whqvlrqvrfnhwdv wklvfrxogehdiluhkd]dug Ɣ$ozd\vglvfrqqhfwsrzhuvxsso\zkhqfohdqlqjwkhdlufrqglwlrqhu7klv frxogfdxvhhohfwulfvkrfn Ɣ Ɣ.Hhswkhuhprwhfrqwurolqdgu\sodfh:dwhuzloofdxvhpdoixqfwlrq Ɣ'rqrwdwwhpswuhsdluvwr\rxudlufrqglwlrqhu7klv...

  • Page 7

    4 buttons on the remote control introduction to icons on the display screen fan auto oper health air filter turbo on/off x-fan hour humidity on/off mode fan x-fan turbo temp timer sleep light 2 5 6 10 13 12 11 9 8 3 4 7 1 1 on/off button 2 mode button 3 +/- button 4 fan button 5 button 8 x-fan butto...

  • Page 8

    5 Ɣ after selecting auto mode,the air conditioner will operate automatically according to the ambient temperature. The temperature cannot be adjusted or displayed in this mode. Press the “fan” button toadjust the fan speed. Press “ ” button and “ ” button to adjust the swing angle. Ɣ after selecting...

  • Page 9

    6 "+" or "-" button fan button 3 4 5 Ɣ after each pressing of "+" or "-" button, you can increase or decrease the set temperature by 1 ć . Hold "+" or "-" button, for 2s and the set temperature on remote control will change more quickly. The temperature indicator on the indoor unit will also change ...

  • Page 10

    7 Ɣ:khqvhohfwlqjzlwkuhprwhfrqwuro\rxhqjdjhdxwrvzlqj7khkrul]rqwdo orxyuhriwkhdlufrqglwlrqhuzloovzlqjohiwdqguljkwdxwrpdwlfdoo\wrwkhpd[lpxp dqjoh Ɣ:khqvhohfwlqj ǃ ǃ ǃ ǃ " Ɣ:khqvhohfwlqj wklvzloohqjdjhdflufxodwlqjvzlqj7kh krul]rqwdoorxyuhriwkhdlufrqglwlrqhuzloovzlqjdffruglqjwrwkhdqjohvkrzqe\ wkhlfrq hea...

  • Page 11

    8 note: Ɣ2xwgrrudpelhqwwhpshudwxuhglvsod\vduhrqvhohfwhgprghorqo\ :khqwkhlqgrruxqlwuhfhlyhvwkhvljqdolwzlooglvsod\wkhlqgrruvhw whpshudwxuh Ɣ2qo\iruprghovkdyhwklvixqfwlrqwkrvhzlwkdgxdoglvsod\ note: Ɣ t lphvhwwlqjudqjhkrxuv Ɣ t lphlqwhuydoehwzhhqwzrrshudwlrqvfdqqrwh[fhhgvhfrqgv temp exwwrq 7,0(5exwwrq 9...

  • Page 12

    9 summary of "combination buttons" turbo button sleep button light button 11 12 13 press this button under cooling or heating mode and the air conditioner will enter a quick cooling or quick heating mode. The character "turbo" will be displayed on remote control. Press this button again to exit turb...

  • Page 13: Emergency Operation

    10 emergency operation care and maintenance note: Ŷ turn off the air conditioner and disconnect the power before cleaning to avoid personal injury by electric shock. Ŷ'rqrwzdvkwkhdlufrqglwlrqhuzlwk water to avoid personal injury by electric shock. Ŷ'rqrwxvhyrodwloholtxlgvwrfohdqwkh air conditione r....

  • Page 14: Operation Guide

    11 operation guide replacement of batteries in remote controll 1. Press and slide the back side of remote control marked with “ ” as shown in the fig. Push out the cover of battery box in the direction of the arrow. 2. Replace 2 x aaa (1.5v) batteries, making sure that the position of "+" polar and ...

  • Page 15: Cleaning and Maintenance

    12 cleaning and maintenance 1 2 3 4 open panel pull and open the panel to the angle shown in figure 2. Ɣ8vhdydffxpfohdqhuruzdwhu wrfohdqwkhilowhu water (below 45 ć wrfohdq and then put it in a shady dqgfrrosodfhwrgu\qdwxudoo\ sdqhofryhuvhfxuho\ 5hpryhwkhilowhudv lqglfdwhglqwkhilj 2. 7khilowhuvkrxoge...

  • Page 16: Cleaning and Maintenance

    13 cleaning and maintenance checking before use in season checking after season 1. Check whether air inlets and air outlets are blocked. 2. Check whether circuit breaker, plugs and sockets are in good condition. 4. Check whether mounting bracket for outdoor unit is damaged or corroded. If yes, pleas...

  • Page 17: Malfunction Analysis

    14 malfunction analysis troubleshooting please check below items before asking for maintenance. If the malfunction still phenomenon check items solution indoor unit can’t receive remote controller’s signal or remote controller has no action. Ɣ:khwkhulwvlqwhuihuhgvhyhuho\ (such as static electricit \...

  • Page 18: Malfunction Analysis

    15 malfunction analysis Ɣ3rzhuidloxuh" Ɣ,vsoxjorrvh" Ɣ&lufxlweuhdnwulsvriiruixvhlv exuqwrxw" Ɣ:lulqjkdvpdoixqfwlrq" Ɣ8qlwkdvuhvwduwhglpphgldwho\ diwhuvwrsslqjrshudwlrq" Ɣ:khwkhuwkhixqfwlrqvhwwlqj iruuhprwhfrqwuroohulv fruuhfw" Ɣ5hvhwwkhixqfwlrq Ɣ:dlwiruplqdqgwkhqwxuq rqwkhxqlwdjdlq Ɣ$vnsurihvvlrqdow...

  • Page 19: Malfunction Analysis

    16 phenomenon check items solution odours are emitted Ɣ:khwkhuwkhuh ’s odour source, such as furniture and cigarette, etc. Ɣ(olplqdwhwkhrgrxuvrxufh air conditioner operates nor- mally suddenly Ɣ:khwkhuwkhuh ’s interference, such as thunder, wireless devices, etc. Ɣ'lvfrqqhfwsrzh r, put back power, a...

  • Page 20: Installation Dimensions

    17 installation dimensions drainage pipe at least 250cm at least 15cm at least 50cm at least 50cm at least 30cm at least 300cm at least 200cm space to the obstruction space to the obstruction space to the obstruction space to the c eiling space to the obstruction space to the obstruction at least 30...

  • Page 21: Tools For Installation

    18 selection of installation location basic requirement outdoor unit installing the unit in the following places may cause malfunction. If it is unavoidable, please consult the local dealer: indoor unit 1.The place has strong heat sources, vapors, flammable or explosive gas, or volatile objects spre...

  • Page 22

    19 requirements for electrical connection safety precaution earthing requirement 1. You must follow the electric safety regulations when installing the unit. 3. Make sure the power supply matches with the requirement of the air conditioner . Improper power supply will cause malfunction to the unit. ...

  • Page 23: Installation of Indoor Unit

    20 installation of indoor unit step one: choosing installation location step two: install wall-mounting frame rm it with the client. 1. Hang the wall-mounting frame on the wall; adjust it in horizontal position with a 3. Fix the wall-mounting frame on the wall with tapping screws (st4.2x25ta) and . ...

  • Page 24: Installation of Indoor Unit

    21 1. Aim the pipe joint at the corresponding bellmouth. 2. Pretightening the union nut with hand. 4. Adjust the torque force by referring to the following sheet. Place the open-end wrench on the pipe joint and place the torque wrench on the union nut. Tighten the union nut with torque wrench. 2. Wh...

  • Page 25: Installation of Indoor Unit

    22 nection pipe with insulating pipe, and insulating pipe 1. Connect the drain hose to the outlet pipe of outlet pipe drain hose drain hose tape outlet pipe drain hose insulating pipe Ɣ add insulating pipe in the indoor 1. Open the panel, remove the screw on the wiring cover and then take wiring cov...

  • Page 26: Installation of Indoor Unit

    23 4. Put wiring cover back and then tighten the screw. 5. Close the panel. Installation of indoor unit note: Ɣ all wires of the indoor unit and outdoor unit should be connected by a professional. For a new one. Avoid extending the wire by yourself. Installation. Ɣ)ruwkhdlufrqglwlrqhuzlwkrxwsoxjdq c...

  • Page 27: Installation of Indoor Unit

    24 installation of indoor unit step eight: band the piped 1. Banding the connection pipe, power cord and drain hose. Indoor unit gas pipe indoor and outdoor power cord liquid pipe drain hose band 2. Reserve a certain length of drain hose and power cord for installation when binding them. When bindin...

  • Page 28: Installation of Outdoor Unit

    2 5 installation of outdoor unit 1. Select installation location according to the house structure. 2. Fix the support of outdoor unit on the selected location with expansion screws. At least 2cm above the floor note: installing the outdoor unit. Ɣ make sure the support can withstand at least four ti...

  • Page 29: Installation of Outdoor Unit

    26 installation of outdoor unit step four: connect indoor and outdoor pipes 1. Remove the screw on the right han- dle of outdoor unit and then remove the handle. 2. Remove the screw cap of valve and aim the pipe joint at the bellmouth of pipe. 3. Pretightening the union nut with hand. 4. Tighten the...

  • Page 30: Installation of Outdoor Unit

    27 step six: neaten the pipes 1. The pipes should be placed along the wall, bent reasonably and hidden possibly. Min. Semidiameter of bending the pipe is 10cm. 2. If the outdoor unit is higher than the wall hole, you must set a u-shaped curve in the pipe before pipe goes into the room, in order to p...

  • Page 31: Vacuum Pumping

    28 vacuum pumping leakage detection 1. Remove the valve caps on the liquid valve and gas valve and the nut of refri- gerant charging vent. 2. Connect the charging hose of piezometer to the refri- gerant charging vent of gas valve and then connect the other charging hose to the vacuum pump. 3. Open t...

  • Page 32: Check After Installation

    29 check after installation test operation items to be checked possible malfunction the unit may drop, shake or emit noise. Have you done the refrigerant leakage test? (heating) capacity. It may cause condensation and water dripping. Is water drained well? It may cause condensation and water drippin...

  • Page 33

    30 install snow guard (optional) height of base in consideration of snow (more than 50cm) more than 50cm seasonal (provide at field) wind in consideration of snow during installation of outdoor units correct incorrect note: it is required to equip snow guard and a higher foundation base to prevent s...

  • Page 34

    31 1. Standard length of connection pipe Ɣp the additional refrigerant oil and refrigerant charging required after prolonging connection pipe Ɣ $iwhuwkhohqjwkrifrqqhfwlrqslshlvsurorqjhgirupdwwkhedvlvri vwdqgdugohqjwk\rxvkrxogdggjudpvriuhiuljhudqwrloiruhdfkdgglwlrqdop of connection pipe. Ɣ the calcul...

  • Page 35

    32 additional refrigerant charging amount for r410a diameter of connection pipe liquid pipe(mm) gas pipe(mm) ĭ ĭruĭ ĭruĭ ĭ ĭ ĭruĭ ĭruĭ ĭruĭ cooling only(g/m) cooling and heating(g/m) 30 120 120 20 outdoor unit throttle.

  • Page 36: Pipe Expanding Method

    33 pipe expanding method note: improper pipe expanding is the main cause of refrigerant leakage. Please expand the pipe according to the following steps: a: cut the pipe the distance of indoor unit and outdoor unit. Ɣ&xwwkhuhtxluhgslshzlwkslshfxwwh r. Pipe pipe cutter leaning uneven burr b: remove t...

  • Page 37

    Eco air guarantees this product free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Coverage is valid only with proof of purchase. This unit must be operated under conditions as recommended, within the voltage range indicated on the unit. Any attemp...

  • Page 40

    66129914685.