Ecoair ECO DCW10 Users Manual & Energy Saving Tips - page 5
On / Off
Press to run or stop the machine.
HOW TO USE YOUR DEHUMIDIFIER
Timer
4
Indicators
Installing remote control battery
"DEHUMIDIFY" indicator: it lights up to indicate the unit running dehumidification.
"DEFROST" indicator: blinks when defrosting. It will automatically return to
dehumidification.
" FULL" indicator: it lights up when the tank is full of water for disposal.
Please pour out water and restore the tank.
Press to set the time when the machine is intended to stop. Choose from 2, 4 and 8 hours.
Hold Timer down if requried to run continuously.
First installation or replacing battery:
1) Remove the 2 screws to release the battery cover from
back of the remote.
2) Insert the new battery with (+) pole up.
3) Fasten the cover.
One CR2032 battery is required.
Signal will fail when the battery needs replacing. Battery life is approximately six months but cannot be
guaranteed (due to the length of the the product could have been held in stock).
Incorrect handling of battery may cause electric shock, fire, fluid leakage, heat or explosion.
Do not short-circuit, disassemble, heat it or burn it. Remove when not in use for long periods.
Battery + pole must
face outwards
ECO DCW10