Cs369-r51i4 2200019089 owner's manual air conditioner remote controller illustration thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner..
1 2 2 5 6 7 7 8 11 12 12 13 handling the remote controller ................................... Remote controller specification................................... Features of remote controller buttons ....................... Indicators on display panel........................................... Auto ...
2 3 temp button : push this button to decrease the indoor o o temperature setting in 1 c increments to 17 c. Reset button: once the recessed reset button is pressed, all of the current settings will be cancelled and the controller will return to the initial settings. Note: heat mode is for cooling &...
Timer off button: press this button to activate the auto-off time setting. Each press will increase the time setting in 30 minutes increments if the setting time is lower than 10 hours. When the setting time reaches 10h, each press will increase the time setting 1 hour in increments. To cancel the a...
Ensure the unit is plugged in and power is available. The operation indicator on the display window of the indoor unit illuminates. 1. Mode select button (mode) press to select auto. 2. Temperature button (temp) set the desired temperature. Normally, o o set it between 21 c and 28 c. 3. On/off butto...
In dry mode, due to the temperature difference between the setting temperature and the actual indoor temperature, the unit will automatically operate in cool or fan mode. To press the timer on button can set the auto-on time of the unit. To press the timer off button can set the auto-off time of the...
11 10 timer off stop on set 10 hours later (auto-off operation) the timer off feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. To stop the air conditioner in 10 hours. 1. Press the timer off button, t...
1 1. When you press the recessed lock button, all current settings are locked in and remote controller does not accept any operation except that of the lock. Use the lock mode when you want to pre- vent settings from being changed accidentally. Press the lock button again when you want to cancel the...
