ECOLINE TV7010 Installation Manual

Summary of TV7010

  • Page 1

    Video surveillance camera installation guide tv7010 tv7011 tv7012 tv7013 9.

  • Page 2: 1. Preface

    1. Preface dear customer, thank you for purchasing this ecoline digital surveillance camera. You made the right decision in choosing this state-of-the-art technology. This product complies with the current standards of domestic and european regulations. The ce has been proven and all related certifi...

  • Page 3: 2. Scope of Delivery

    2. Scope of delivery ecoline dome camera (model as described) installation instructions fastening screws 3. Features all dome cameras of the ecoline series have the following functions: a) auto electronic shutter (aes) b) auto gain control (agc) additional for colour cameras of this series: c) auto ...

  • Page 4: Humidity and Power Ranges.

    Never point the camera towards the sun. Whether the camera is in use or not, never aim the ccd at the sun or other very bright objects (laser light). This can damage the ccd element and create white dots on the monitor, a sign that ccd pixels are destroyed. Operate the camera only within the specifi...

  • Page 5: 5. Installation Instructions

    5. Installation instructions this camera is designed for indoor use only. If the camera is used outdoors, damage may occur as a result of dampness and temperatures outside the prescribed range. The ecoline colour cameras are equipped with an ir cut and cannot be used in combination with ir illuminat...

  • Page 6: 1) Video Output (Video Out)

    6. Description of the camera 1) video output (video out) bnc output. This connector is for connecting the camera video signal to the video in connector of, for example, the monitor (composite signal: 1vp-p). 2) power input 12v dc voltage. Approved for dc voltage are class 2 power supply units only. ...

  • Page 7: 7. Installation

    7. Installation proceed as follows when installing the camera. 1. Select a suitable place on the ceiling of the room where you would like to mount the camera. 2. Connect the video cable (recommended cable type: rg58) to the bnc video out (1) of the camera and to the following connected video unit. T...

  • Page 8: 8. Technical Data

    8. Technical data model number tv7010 tv7011 tv7012 tv7013 image sensor 1/3” sony super had ccd tv lines / pixels 420 / 291,000 600 / 438,000 380 / 291,000 470 / 438,000 minimum illumination (ire 30) 0.1 lux (f2.0) 0.2 lux (f2.0) 0.2 lux (f2.0) 0.4 lux (f2.0) signal-to-noise ratio > 48 db aes 1/50s ...