Ecom Ex-Handy 09 Safety Instructions - 5.3 Nec & Cec

7

5.3 NEC & CEC

Ex-Marking: 

Class I, II, III Div 1 Groups A-G T4 

Ambient temperature:  Ta -20 °C ... +55 °C

Approved for Division 1 and 2 Class I, II, III.

Please note: Only devices showing the FCC and IC identification numbers are 

approved and certified to be used in the United States and Canada

6. Specifications 

Operating system:  Android 4.4 (Kitkat)

Networks:  

EDGE 850/900/1800/1900 MHz

HSPA 850/900/1700/2100 MHz

LTE 800/900/1800/2100/2600 MHz                                              

Bluetooth:  

4.0/BLE (Bluetooth Low Energy) 

Power supply: 

Li-Ion  battery 3600 mAh, 3.7 V (built-in) 

CE-designation: 

 0102

Protection class: 

IP68 (for 30 minutes, 2 meters under water)

SAR: 

max. 0.350 W/kg (10g) Smart-Ex 01

max. 0.327 W/kg (10g) Ex-Handy 09

Inserting the SIM Card:

1.  Remove the screws of the headset port cover and the SIM card cover with the 

provided Multitool “MT S01” and remove both covers.

2.  Insert the pin of the Multitool “MT S01” into the pinhole and press inside. The 

SIM card tray will pop-up. Use the pin to hook into the loop on top of the SIM 

card tray and remove the tray completely.

3.  Insert the SIM card in the tray and return the tray into the slot by pushing it in. 

Making sure the pinhole is not aligned next to the headset port. 

4. Refix both the covers and screws in place using the Multitool “MT S01”.