Ecom Instruments Ex-TRA 300 Safety Instructions

Other manuals for Ex-TRA 300: Specification Sheet

Summary of Ex-TRA 300

  • Page 1

    Safety instructions ex-tra 300 produktbereich kommunikation.

  • Page 2

    11 note: the current operating manual, the ec declaration of conformity and the ex- certificate can be downloaded from the relevant product page at www.Ecom- ex.Com, or alternatively they can be requested directly from the manufacturer. 1. Application ...................................................

  • Page 3

    12 1. Application the ex-tra 300 headsets are intended for industrial application in areas with an increased risk of explosion in zone 1 in accordance with directive 1999/92/ ec (atex 137). 2. Safety information these safety instructions contain information and safety regulations which are to be obs...

  • Page 4

    13 withdrawn from use and removed from the ex-area. - only those accessories approved by ecom instruments gmbh may be used. - avoid use in aggressive acids or bases. - it must be ensured that the device is prevented from entering zone 0 or dust ex-areas. - the radio unit must be connected outside th...

  • Page 5

    14 7. Connected load values headset: ex-tra 300 a ex-tra 300 b ex-tra 300 c ex-tra 300 d ex-tra 300 e ex-tra 300 f ui 8.4 v 8.4 v 6.4 v 5.56 v 4.1 v ii 3.55 a 1.2 a 1.2 a 4.71 a 7.8 a ic - - - 1.114 a 1.114 a pi 29.85 w 10 w 7.68 w 2.1 w 4.68 w ci negligible negligible negligible negligible 4.99 uf ...

  • Page 6

    15 8.1.3 connecting the set insert the connecting plug into the accessory socket on the radio unit. Only now should you switch on the radio unit. The headset is always set to the receive mode. To transmit a message press the round ptt button; the radio unit now swit- ches from receive to transmit. A...

  • Page 7

    16 8.2.2 sound tube the silicone sound tube should sit loosely in the middle of the pinna of your ear and it should not be inserted into your ear canal; doing this prevents interfering with the natural sound of the ear and makes maximum use of the amplification of the ear canal. The sound tube can a...

  • Page 8

    17 to change, remove the windscreen from the microphone and carefully attach the new windscreen. 8.2.7 headset detection if you want to operate the radio unit and the headset is connected, you do not need to remove the entire headset from the radio unit. The headset upper part can be separated at th...

  • Page 9

    18 screw the helmet adapter to the helmet. Unscrew the knurled screw to open the bracket slightly, thus enabling it to be slid easily over the rim of the hel- met. Arrange the helmet adapter in such a way that the side slots of the tube point towards the sound inlet apertures on the helmet now tight...

  • Page 10

    19 repairs are to be conducted by ecom instruments gmbh or by personnel or service centres authorised by ecom instruments gmbh, because the safety of the unit needs to be tested after repairs are implemented. To facilitate the repair process please complete and submit the enclosed re- pair report sh...

  • Page 11

    20 12. Warranty and liability in accordance with our general terms and conditions ecom instruments gmbh provides a warranty for this product for a period of two years regarding its function and material under the specified and permitted operating and main- tenance conditions. This excludes all parts...

  • Page 12

    Ecom instruments gmbh industriestr. 2 · 97959 assamstadt · germany tel.: + 49 (0) 62 94 / 42 24 0 · fax: + 49 (0) 62 94 / 42 24 100 · e-mail: sales@ecom-ex.Com · www.Ecom-ex.Com copyright © 2011 ecom instruments gmbh. Der inhalt dieses dokuments darf ohne vorherige schriftliche genehmigung durch die...