... A quick way of heating he.
3 1 general instructions • please read the explanatory instructions prior to installation. • remove the plug from the mains power socket to disconnect the heater. Do not pull on the cable. • do not leave the mains cable in contact with the heater when it is switched on. • during operation, ensure th...
4 safety distances and installation fig. 3 object object 2 installation and mounting • this heater can be installed on feet (provided) or on a wall. • the heater must never be installed underneath a mains wall socket. • the heater must never be installed in a position where the switches and other co...
5 c d fig. 8 4.5 hang the heater on the two hooks (c) on the wall. Ensure that the heater is correctly secured on both hooks . Hanger hook (c) 4. Assembly 4.1 while respecting the previously indicated safety measurements, make two marks on the wall according to measurement “e” indicated in table 1 a...
6 4 2.2 installing the feet: 1. Screw the two feet to the lower rear part of the heater with the four screws (f). G 3 fig. 12 operation • your heater is fitted with a digital, daily- programmable timer-thermostat that controls and adjusts the heating. • the heater can be used to two ways , either ma...
7 5.2 locking / unlocking the heater controls will automatically lock when no button has been pressed for sixty seconds. This operation will occur in both manual and automatic modes. The heater controls can be unlocked by pressing the “-“ button on the control panel for three seconds (figure 13) or ...
8 no bars 5.7 automatic use (programmed) taking into account your personal needs, the heater provides the possibility to create an individual programme. This programme is established according to the day, time and operating modes: comfort, economy, anti- icing or standby mode. 1) if the heater is in...
9 important: if you wish to modify the previously assigned temperatures for each operating mode then follow the steps given in section 5.5 of these instructions. Example programme : 7 power cuts • the programmed actual day. (1 monday). Fig. 24 if there is a power cut, the heater will not work, but w...
10 10 maintenance • this heater does not require any special maintenance. • it is recommended that when the heater is put into use for the first time each year, all dust and any other dirt on the outer surfaces should be cleaned off (always cold and switched off), together with any accumulated dust ...
