EControls Comfort 365 C365T11 Installer Manual

Page of 8

Download

Print this page

Bookmark us

Inside

Day

Upstairs

Auto

Downstairs

Airflow %

HEAT

Schedule

AUTO

FAN

MENU

MODE

Heat

Set To

SYSTEM

365

Comfort

UP/DOWN Keys.

SYSTEM MODE Key

OFF, HEAT, COOL or Auto

Displays the downstairs

(Inside) or upstairs (Inside2)

temperature.

Displays the Thermostat Mode

HOLD, SCHEDULE or VACANT

Displays the time, day and schedule

MORNING, DAYTIME, EVENING

or NIGHT

MENU Key Displays

the User options.

MODE Key Selects

Thermostat Mode

HOLD, SCHEDULE or VACANT

Displays the upstairs airflow

Displays the Airflow Mode

AUTOMATIC or MANUAL

Displays the heating or

cooling temperature

FAN MODE Key

AUTO or ON

Description

System Modes

Airflow Limits

Nighttime Operation

Upstairs Temperature Sensor

Modulating Dampers

Power

Warranty

Compatible HVAC Equipment

Thermostat Modes

Programs per Day

Program Format

Temperature Override

Airflow Override

Airflow Modes

Fan Modes

The C365 thermostat controls the heating and cooling system

the same as most programmable thermostats. It also controls

the airflow to the upstairs and downstairs using an upstairs and

a downstairs modulating damper. A temperature sensor

located upstairs monitors the upstairs temperature and the

temperature sensor in the C365 monitors the downstairs

temperature.

The C365 adjusts the upstairs and downstairs airflow during

heating and cooling calls to maintain uniform upstairs and

downstairs temperatures.

Off, Heating only, Cooling only, Automatic Heating or Cooling.

Maximum upstairs and downstairs, heating and cooling airflow

limits are set during installation.

Option used when bedrooms are located upstairs. C365 uses

the upstairs temperature sensor to control heating and cooling

calls and directs more airflow upstairs.

One Model TS5-10 or two Model TS5-20 upstairs temperature

sensors can be used.

Round or rectangular dampers using the A80MOC actuator

and up to 1 inch static pressure.

Operates on 24VAC from the HVAC equipment using the R

and C wires.

Single stage gas or electric heating with single stage

compressor.

Hold, Schedule or Vacant mode.

Morning, Daytime, Evening and Night.

Weekdays and weekend– 5/2.

Up/down keys adjust the setpoint temperature. Temperature

setting is held for 4 hours when adjusted in Schedule mode.

Up/down keys adjust the upstairs/downstairs airflow. Airflow

setting is held for 4 hours when adjusted in Automatic mode.

Automatic or Manual when Manual mode is enabled.

Continuous or Automatic fan operation.

This thermostat is warranted to be free of defects due to

workmanship or materials under normal use and service for a

period of 5 years from date of installation and not longer than

6 years from manufacturing date code.

Installer Manual

Model C365T11

365

Comfort

eControls, Inc. 26072 Merit Circle #110 / Laguna Hills, CA 92653

949-916-0945 Fax 949-458-8502 www.eControlsUSA.com

eControls

Rev A Jan 2016

Displays the downstairs airflow

NEXT Key

Used to advance through

options

ENTER Key

Used to save options and

return to thermostat operation

1 2 3 4 5 6 7 Next › »

Summary of Comfort 365 C365T11

Page 1
Inside tu day upstairs auto downstairs airflow % heat schedule auto fan menu mode heat set to system am 365 comfort up/down keys. System mode key off, heat, cool or auto displays the downstairs (inside) or upstairs (inside2) temperature. Displays the thermostat mode hold, schedule or vacant displays...
Page 2
Separate the c365 subbase attach the subbase to the wall install two aa batteries place a slotted screwdiriver in the slots as shown and rotate to remove subbase from the c365 housing. Attach the subbase to an interior wall and about 5-feet above the floor as shown using the screws and wall anchors ...
Page 3
R com cls opn com cls opn c w equipment upstairs downstairs y g upstairs sensor model a80-moc damper actuator modulating or open/close 24vac,2.4va com opn cls made in usa econtrols, inc. Model a80-moc damper actuator modulating or open/close 24vac,2.4va com opn cls made in usa econtrols, inc. G hvac...
Page 4
Upstairs temperature sensor wiring (cont) single upstairs temperature sensor dual upstairs temperature sensors place wire between brass washer and the printed circuit board and hand tighten screw. The ts5 can be installed in a single gang box or directly to the wall using the hardware provided. Hand...
Page 5
Option 01 02 03 04 05 06 07 08 09 10 12 13 14 15 16 17 19 18 20 21 description compressor stages heating stages. Fan operation. Compressor minimum off time (minutes). Gas minimum off time (minutes). Minimum run time (minutes). On-off temperature differential smart recovery. Vacant heating setpoint. ...
Page 6
6 touch the keys to change the minimum off time (minutes) before restarting the compressor. Touch to display the next option, or to save the option and return to normal thermostat operation. Up/down next enter option next enter option next enter touch the keys to change the minimum run time (minutes...
Page 7
7 option next enter night touch the key to turn the low level backlight on or touch the key to turn off. Touch to display the next option, or to save the option and return to normal thermostat operation, or touch the hidden key to return to the previous option. Up down next enter back touch the key ...
Page 8
8 accessing the test menu to access the test menu, and the hidden next key for 7 seconds until the fan test screen (option 01) appears. Touch hold the test menu is used to test the indoor fan operation, allowable heating airflow limits and allowable cooling airflow limits. Inside tu day upstairs aut...