EControls Comfort365 User Manual - page 3
Overriding Automatic Airflow
Terminating Airflow Override
In AUTOMATIC AIRFLOW MODE, the user can override the airflow to
the upstairs and downstairs by pressing
AIRFLOW %
in the area
shown and then use the
UP/DOWN
keys to adjust the airflow. After 3
hours, the thermostat returns to automatic operation. UPSTAIRS,
AIRFLOW% and DOWNSTAIRS blink when in airflow override.
AIRFLOW OVERRIDE can terminated by pressing
in the
area shown and then pressing the
Mode
key. The thermostat returns
to automatic airflow control. The AIRFLOW % returns to the airflow
prior to the override.
AIRFLOW %
Touch
AIRFLOW%
as shown.
Touch the
UP
key to increase the
upstairs airflow (the downstairs airflow
will automatically decrease). Touch the
DOWN
key to increase downstairs airflow
(the upstairs airflow will automatically
decrease).
The override range is defined by the
installer during set up.
Touch
AIRFLOW%
as shown.
Touch the
MODE
key to terminate airflow
override.
The thermostat returns to automatic
airflow control. The AIRFLOW % returns
to the airflow prior to the override.
Inside
Inside
We
We
Eve
Eve
Upstairs
Upstairs
Auto
Downstairs
Downstairs
Airflow %
Airflow %
COOL
COOL
Hold
Hold
AUTO
AUTO
FAN
FAN
MENU
MENU
MODE
MODE
SYSTEM
SYSTEM
PM
PM
This area will blink when
in airflow override.
User Options
Selecting Manual or Auto Airflow
Turning Nighttime Airflow Option On or Off
Setting Nighttime Airflow in Heating
Setting Nighttime Airflow in Cooling
Cleaning the Touchscreen
Set Schedule
Factory Set Schedule
Morn
Day
Even
Nite
Monday through Friday
The thermostat comes pre-set with the following energy-saving
schedule for weekdays (Monday-Friday) and weekends
(Saturday-Sunday).Using these settings can reduce your
heating/cooling expenses.
6:00 AM
8:00 AM
6:00 PM
10:00 PM
70
62
70
62
Time
Heat
Cool
Morn
Day
Even
Nite
Saturday and Sunday
6:00 AM
8:00 AM
6:00 PM
10:00 PM
70
62
70
62
75
75
83
83
75
75
78
78
Time
Heat
Cool
Change Factory Set Schedule
Touch the
key to display SCHEDULE. Here you will select either
the weekday or weekend schedule to display or change. If no key is
touched, the thermostat returns to normal operation after about 30
seconds.
MENU
We
Tu
Mo
ThFr
Schedule
MENU
NEXT
ENTER
Touch the
UP
key to select the weekday
schedule (MoTuWeThFr) or touch the
DOWN
key to select the weekend
schedule (SaSu) and then touch
NEXT
.
SELECTING THE WEEKDAY OR
WEEKEND SCHEDULE
We
Tu
Mo
Morn
ThFr
Schedule
MENU
NEXT
ENTER
AM
We
Tu
Mo
Morn
ThFr
Schedule
MENU
NEXT
ENTER
Heat
Set To
AM
We
Tu
Mo
Morn
ThFr
Schedule
MENU
NEXT
ENTER
Cool
Set To
AM
Touch the
UP/DOWN
keys to change the
Morning Schedule Start Time and then
touch
NEXT
.
SETTING THE MORNING SCHEDULE
START TIME.
Touch the
UP/DOWN
keys to change the
Morning Schedule Heating Setpoint and
then touch
NEXT
.
SETTING THE MORNING SCHEDULE
HEATING TEMPERATURE.
Touch the
UP/DOWN
keys to change
Morning Schedule Cooling Setpoint and
then touch
NEXT
.
SETTING THE MORNING SCHEDULE
COOLING TEMPERATURE.
Continue setting the start times, heating setpoints, cooling setpoints for
the Day, Evening and Night schedules.
Touch
ENTER
to save the schedules to the weekdays or the weekend.
Selecting Manual or Auto Airflow
This option is only displayed if your installer enabled Manual Airflow
Control during installation. AUTOMATIC AIRFLOW is the default. In
AUTOMATIC AIRFLOW CONTROL, the airflow is adjusted by the
thermostat. In MANUAL AIRFLOW CONTROL, the user must adjust
the airflow. The airflow range is defined by the installer during set up.
Upstairs
Downstairs
Airflow %
MENU
NEXT
ENTER
Touch the
MENU
key until the following
thermostat screen is displayed.
Touch the
UP
key to select AUTO. Touch
the
DOWN
key to select MANUAL.
Touch the
key to save and go to
next option or touch the
ENTER
key to
save the options and return to normal
thermostat operation.
MENU
Auto