Flair flair owner’s manual caution: read manual carefully for proper procedures and operation. • application • noteable features • specifications • installation • operation • maintenance • warranty living air electronic air purification systems 100, 110, 220/240 volt flair ™ systems ™ ecoquest...
Contents applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 notable features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 model specifications . . . . . . . . . . . . . . ...
3 applications eliminate • smoke • odors • tobacco smoke plus it works as an appliance to sanitize an area to reduce • mold • mildew • bacteria notable features • compact • portable • no duct work required • no chemicals • low maintenance • low electrical use • complete user control • no residual co...
Principles of operation nature cleanses the air with the lightning and rain. Lightning bolts produce ozone, as well as positive and negative ions which cleanse the air naturally. Rain helps bring the ozone and ions closer to the earth's surface. They are then attracted to atmospheric contaminants th...
Synairg tm purification plate installation the flair utilizes two synairg tm purification plates. 1. Remove (2) phillips-head screws. (220/240 volt only) 2. Remove the rear lint screen. 3. Fully insert the synairg tm purification plates (a & b) between the guides until they stop. 4. Re-install lint ...
The flair is most effective when placed in a position that allows the ions and ozone to be mixed evenly and thoroughly with the polluted air. Suggested locations, listed in the order of preference: 1. Nearest the source of the worst pollution. 2. Near a cold-air return to thoroughly circulate clean ...
Setting and adjusting controls 1. Fan control the disbursement of cleansing properties is best accomplished with good air circulation. The fan control should be set as high as possible without creating an undesirable noise level. This will be determined by personal preference and the distance you wi...
Maintenance periodic maintenance is required to insure that the flair operates properly. A severely polluted environment can foul an synairg tm purification plate in as little as two weeks or as long as a year. Shown here are basic maintenance procedures that should be carried out to keep your unit ...
Troubleshooting indicators of operation operation of the ion indicator lamps: turn the unit on and check that the small red/orange lamp is illuminated. The lamp is located inside the unit and is viewed by looking into the unit through the front grill. Illumination of the internal lamp verifies that ...
Troubleshooting - what to look for first. 1. I have plugged in the unit, turned "on" the power switch and nothing happens…what's wrong? • make sure the electrical outlet is working properly. • check the lint screen located at the back to ensure that the safety switch activator clip depresses the saf...
5. What are the most typical application problems? • symptom : a belief that the proper equipment is placed in the environment and the equipment appears unsuccessful. Problem: lack of air movement, improper placement of the unit. • symptom : strong odors still remain with the environment after place...
Flair ™ 12 warranty information this product is of solid state construction and is warrantied by ecoquest international 310 t. Elmer cox drive greeneville, tn 37743 to the original purchaser, depending on model, to be free from defect in materials and workmanship for a limited time. Length of warran...
