EcoQuest FreshAir Owner's Manual - page 4
6
7
Purifier
Fan
Purifier
Fan
Purifier
On / Off
Power
Sanitize
PERFORM CLEANING
(approx. every 30 days)
• Vacuum Lint Screen
• Clean Purifier Plate
• Clean the RCI
™
Target
• Vacuum Front and Rear Grill openings
REPLACE PLATE
The purifier plate is not
functioning properly.
• Replace the old purifier plate with a new purifier plate (available
from your
EcoQuest Dealer)
REPLACE LAMP
The germicidal UV lamp is
no longer working correctly
• Replace the UV lamp and starter (new lamps and starters are
available from your
EcoQuest Dealer)
LCD SCREEN
The LCD Screen is used to display all current settings as well as
any maintenance reminders and service messages.
LCD DISPLAY
MAINTENANCE AND SERVICE REMINDERS
LCD SCREEN BACKLIGHT
As adjustments are being made, the LCD screen backlight will
brighten and the settings on the screen will change. After 3
seconds without change, the backlight will return to normal.
If a maintenance reminder or a service reminder appears, the
backlight will brighten and stay bright until the Reminder Reset
button is pressed or the service problem is corrected.
Purifier Setting
Fan Speed
Purifier Coverage
Reminders (normally blank - reminders appear here when unit needs maintenance)
RESETTING THE REMINDERS
The only reminder you need to reset is the PERFORM CLEANING
reminder (after performing maintenance, press the Reminder Reset
button and the screen will display CLEARED, then clear the message).
All the other service reminders will clear automatically once the unit
has been turned off and back on and the problem has been corrected.
SEE PAGES 10 - 13 FOR REMOVAL AND INSTALLATION INSTRUCTIONS
Be sure to press the Reminder
Reset button to clear the reminder
following regular maintenance
SETTINGS AND ADJUSTMENTS
Fresh Air by EcoQuest can be turned on or off and adjusted using
either the included remote or the control panel on the front of the
unit. With the exception of the Reminder Reset button, both the
remote and the control panel buttons have the same functions.
Power ON/OFF
Fan UP
Sanitizer
Purifier UP
Purifier DOWN
Fan DOWN
Purifier
ON/OFF
Reminder
Reset
POWER (STAND BY)
Turns the unit ON and OFF. Works only when the Main Power
switch (in back of unit) is turned on.
FAN UP / FAN DOWN
Adjusts the five speed fan.
PURIFIER UP / PURIFIER DOWN
Sets the purifier level for the indoor area. The level is indicated
by both a horizontal bar graph and square footage for U.S.
models (or square meters for international models).
PURIFIER ON/OFF
Turns the Purifier Plate on and off.
NOTE: when the display shows SYNAIRG4 ON, the UV, RCI
™
Target, and ionization features continue to operate normally.
SANITIZER
Turns on and adjusts the timer for the sanitizer function. Each
press of the Sanitizer button will increase the time by two
hours, up to eight hours, then OFF.
REMINDER RESET
(CONTROL PANEL ONLY)
Clears the maintenance reminders after performing
routine maintenance.
POWER ON/OFF
Sanitizer ON
Battery compartment (2 AAA)
Purifier ON/OFF
Purifier DOWN
Purifier UP
Fan UP
Fan DOWN
Remote Operation LED