EcoSeb DD122EA SIMPLE User Manual - Quick Start Up
E
n
g
li
sh
© 2014 EcoSeb, Inc. 4 All rights reserved
QUICK START UP
STEP 3 - ON/OFF
TO
OPERATE
UNIT
•
Place the unit in an upright posi-
+on on an even level surface.
•
Plug the dehumidifier into the
mains socket.
•
Turn the humidity stat dial clock-
wise to select desired mode.
(Power ON indicator lights up)
•
Turn an+-clockwise to switch the
unit OFF.
STEP 1 - WHERE TO POSITION YOUR DEHU-
MIDIFIER?
Ensure the unit is a safe distance away from a
wall or furniture, away from direct sunlight.
TIP:
Posi+on the dehumidifier in the dampest
room or somewhere central like a landing or a
hallway. As long as the internal doors are open
the excess moisture from all of the rooms in
the house will migrate naturally towards the
dehumidifier and be processed.
Low
Select to keep the room at a com-
fortable level
•
Dries the air to approximately 70%
RH and stops dehumidifying.
Medium
Select to run in Medium mode
•
Dries the air to approximately 50%
RH and stops dehumidifying.
High
Select High mode to quickly control
high levels of humidity
•
Dries the air to approximately 40%
RH and stops dehumidifying.
STEP 4 - DRY/LAUNDRY MODE
Laundry
•
Use for drying clothes. The dehu-
midifier will con+nuously dry the
air un+l the seEngs are changed
manually. It typically takes 2 – 4
hours to dry your laundry.
STEP 2 - CAUTION - AVOID USING IN
•
Small confined area i.e. broom cupboard,
boiler room, unven+lated rooms etc.
•
Close proximity to a heat source such as
heater, tumble dryer, cooker.
•
Dusty or building sites or an industrial envi-
ronment where par+cles can clog up the fil-
ter or internal components. This will cause
the unit to malfunc+on, voiding your
warranty.