Ecosmar+ XL700 User Manual - page 3
© Copyright 2004 - 2010 The Fire Company Pty Ltd - International Patent Pending - Trademark Registered - All Designs Registered.
www.ecosmartfire.com
Clearances
INSERTING WITHIN A FIREBOX SETTING:
The EcoSmart™ XL700 Burner can only be fitted into a non-combustible firebox that has minimum
clearances of
:-
W 900mm [35.4in] x H 500mm [19.7in] x D 350mm [13.7in].
Custom made fireboxes must:
- Be made out of a non-combustible material such as stainless steel
- Be constructed to accommodate a Top Tray or “Twin Skin”
- Have built in spacers of 20mm [0.8in] on all sides to ensure that it does not sit directly against any
combustible materials and an air gap is incorporated for insulation around the box construction
INSERTING WITHOUT A FIREBOX SETTING:
REAR: A minimum of 40mm [1.6in] space between the burner edge/Top Tray edge and the rear wall (which
should be a non combustible material).
Warning: The rear wall should be a non combustible material.
If the rear wall is combustible, a distance of 600mm [23.6in] must be allowed for.
FRONT: A minimum of 65mm [2.6in] space between the burner and the front edge.
OVERHEAD: A minimum clearance of 1500mm [59.1in] from the burner mouth to the nearest combustible.
SIDES: A minimum clearance of 600mm [23.6in] from the burner edge to the nearest combustible.
BASE: Must be made of non-combustible material.
Model Specifications
Burner Kit
XL700
3
7