EcoSpar ALBA 15 kW Manual For Installation And Operation - page 4
4
For safety purposes, the following must be strictly observed:
The pellet stove is not to be operated by children or disabled persons.
It is forbidden to install the product in a toilet, damp spaces, such as laundry room, as well as to
touch the pellet stove with wet hands or legs. A power supply socket with a ground terminal
(safety socket) should provided to power the appliance.
It is forbidden to change or cancel the safety precautions without an authorization by a ECO SPAR
authorized technician.
Do not pull, tear, burn the cables coming out from the product even if it is off.
Do not leave the packaging close to children or disabled persons.
During the normal operation of the product, the door should be closed at all times.
Avoid direct contact with hot parts of the product.
Check if there are difficulties while turning the product on after a long period of non- operation
(
see chapter 6.0)
.
The pellet stove is designed to work even in extreme weather conditions, however, in case of
strong wind or frosty conditions, the safety systems might trigger on and shut the pellet stove off.
In such case, the user should contact the authorized service. It is not advisable to disable or reset
the safety devices on the user’s discretion.
Fire extinguisher should be in reach in case of accidental occurrence of fire in the exhaust gas pipe.
2.0. TECHNICAL CHARACTERISTICS
2.1 Accessories
Before the initial installation of the pellet stove, you should check whether all accessories are in place:
Pipe scraping lever
Remote controller
Control panel + screws for its mounting (in the reservoir for pellets)
Documentation (warranty, instruction manual, service centers)
Important: Read carefully the whole documentation and keep it attentively.
2.2 Assembling the control panel