Washing machine owner’s instruction manual model: wm12-600 •please read this manual carefully before washing machine operation. • retain it for future reference. • record model number and serial number of the unit. • see the label attached on the back cover and quote this information to your dealer ...
Read this manual carefully you will find many helpful hints on how to use and maintain your washer properly. Just a little preventative care can save a great deal of time and money over the life of washer. This manual will guide to many answers to common problems and operations of washing machine. C...
In tr o d u ct io n warning observe the following items in order to prevent from injuring yourself, others and the damage of property: this graphic represents (forcible execution), and detailed forcible execution items will be displayed inside the graphics. This graphics represents (operation prohib...
Warning to avoid electric shock resulting from electric leakage, please connect grounding wire of the plug properly. Grounding do not exceed the max. Water level to avoid water overflowing and machine failure. + forbid forbid if use warm water, the water temperature should not exceed 50℃. Forbid do ...
Attention to installation change the position of the drain hose (for lower drain system only) front drain hose buckle blanket the ex-factory installation position of the drain hose is located at the spin side. According to the installation site, the drain hose can also be installed at the wash side ...
Name of parts the figure 1. 1 shows the basic body parts. Inner spin cover accessories the below accessories come along with the washing machine. Figure 1.1 introduction of control panel • water inlet: can be used to inject water. • wash timer: can be used to select required washing time. • spin tim...
• plug in power and connect the water inlet hose. • lay down the lower drain hose and connect it to the house drain. • check that there are no objects such as coins, hairpins, mud or sand in the pocket. • strings should be knotted in advance to prevent entanglement. • clothes can be classified for w...
Water level indicator quick start washing method a. Spraying rinse (rinse in the spin tub) 1. Put the laundry into the spin tub after washing. 2. Turn on the water tap, choose to fill water into the spin tub for 3-4 minutes, and then turn off the water tap. 3. Set the spin timer for 2-5 minutes for ...
Spinning method • to save time, water and energy, can do pre-spinning before rinsing. • put laundries which have already been dehydrated into the wash tub. • after filling water to the desired level, turn off the water tap to save water. • turn the “wash selector” knob to the "normal” or “heavy”. • ...
Special features soak function (for machines having soak function only) for seriously stained clothes, soak wash is useful to achieve better wash result. 15-35 minutes of the wash timer is for soak wash:(illustrate as follows) work time about 5 about 5 about 5 total: 35 (mins) about 1.5 about 1.5 ab...
Attention to maintenance cabinet maintenance cleaning the lint filter after using the washing machine, wipe the moisture and stain on it with a piece of soft cloth. To avoid damage to the surface, do not use corrosive or volatile chemicals. • press the button head, and pull the lint filter out. • tu...
• be sure to use plug that is properly grounded. • the maximum gradient of the supporting surface for the washing machine should not exceed 2º. • do not tear down electrical wires and components in the machine by yourself. • there are holes on the base for ventilation. These holes should not be bloc...
Main technical parameters capacity (dry clothes) power supply input power (lower drain) 12.0 kg 450w 7.0kg 180w 220v/50hz maximum time water volume maximum water pressure overall dimension (mm) net weight (kg) 15 min. 35 min.(soak wash) h: 87l m: 65l l: 42l 5 min. / 0.6mpa 902 x 537 x 965 32.5 wash ...
