Ecosy+ Purefire Panoramic 5kw Slimline - SE Installation And Operating Instructions Manual - page 2
2
SAFETY
Safety is the most important consideration when using and installing your stove. If not installed and
used correctly, a house fire could result. Installation must comply with relevant national and local
Building Regulations and fire safety standards.
IN THE EVENT OF A CHIMNEY FIRE, EVACUATE THE PROPERTY AND CALL THE EMERGENCY
SERVICES.
Your stove will be heavy, and care needs to be taken when lifting - 2 people will normally be required
to lift.
UNPACKING
Your stove will have several of its components stored inside the stove itself for transportation.
The main component is the flue collar; this will simply need attaching with the provided bolts on the
top, or rear of the fire. This is a Woodburning only stove, so does not require an ash pan or multi-fuel
grate
INSTALLATION
Installation of your stove must comply with relevant local and national Building Regulations and fire
safety standards. We would always suggest using a qualified installer to carry out the installation of this
product. We recommend that you have a qualified fitter install your stove. The British recognised
standard for solid fuel installations is HETAS. You can find a HETAS qualified installer in your area by
going to the HETAS website –
www.hetas.co.uk
TECHNICAL
Purefire Panoramic Slimline 5kw - Performance Test Results.
Weight 85kg
Total Efficiency 80 %
Nominal heat output kW 5.00
Mean CO emission (at 13 % O2)
0.09%
Mean flue gas temperature
ºC 276
Flue gas mass flow g/s 4.3
Mean NOx emission (at 13 % O2)
Nmg/m3 - 99
DIN Plus particulates (at 13 % O2) Nmg/m3 - 39
Mean CnHm emission (at 13 % O2) Nmg/m3 - 69
Distances to combustibles: Back Wall 500 mm - Side wall 350mm
Hearth Temperatures