EcoTAC Salt-Free Hard Water Conditioner Installation Manual - Table Of Contents:
2
Congratulations on the purchase of your EcoTAC™ Salt-Free Hard Water Conditioner. You
have purchased one of the finest hard water treatment systems on the market today. EcoTAC™
treatment systems use the latest in salt-free hard water conditioning media technology to reduce or
eliminate hard water mineral scale. EcoTAC™ is an environmentally-friendly alternative to
conventional water softeners to prevent the formation of hard water scale in your plumbing system,
water treatment equipment, water heater, dishwasher, and more.
This manual is designed to provide owners, installers, and service technicians with detailed
information about the installation, start-up, and operation of your new water treatment system.
The heart of your EcoTAC™ system is its highly-specialized Template Assisted Crystalization
(TAC) media. To ensure optimal performance and life of your TAC media, it is important that
these instructions be followed and that the system is operated within the technical specifications
provided. Your warranty may be voided if you fail to follow these instructions and/or fail to
operate your treatment device within the guidelines noted.
Your EcoTAC™ water treatment system is designed to offer low maintenance operation. No
backwash is required. The media will need to be replaced every 3 to 5 years. As the TAC media is
the most critical component to the success of your EcoTAC™ system, we strongly recommend that
only authentic EcoTAC™ media be used to replace your media when the time comes.
Where is it made?
Treatment Tank, Jacket and Internal Parts: USA
Control Valve, Bypass Assembly and Fittings: USA
TAC media: Germany
Assembly: Canada
All components are tested and certified against NSF/ANSI 61 for material requirements.
Table of Contents:
OPERATING CONDITIONS …………………………………………………... 3
INSTALLATION …………………………………………………………..……. 4
Step 1 – Pre-Installation Inspection ………………………………….…… 4
Step 2 – Select an Installation Site …………………………………..…... 5
Step 3 – Prepare the Treatment Tank ……………………………….…… 5
Step 4 – Turn off the Water & Electric Water Heaters ………………..… 5
Step 5 – Install Pre-Filters (if applicable) …………………………..……. 6
Step 6 – Connect Installation Fittings to Bypass ……………………..….. 6
Step 7 – Complete Plumbing Connections ………………………………. 7
Step 8 – Initial Start-up and Leak Testing ……………………………….. 8
WHAT TO EXPECT IN THE FIRST FEW WEEKS …………………………… 8
MAINTENANCE INFORMATION ……………………….……………………. 10
WARRANTY ……………………………………………………………………. 10