Ecox RG57A7/BGEF Owner's Manual - page 10
10
REMOTE CONTROL
Mini Split Inverter
EDFM
HOW TO USE THE BUTTONS
AUTO OPERATION
COOLING /HEATING/FAN OPERATION
Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor
unit illuminates.
Press the MODE button to select Auto.
Press the TEMP button to set the desired temperature. The
temperature can be set within a range of 17ºC ~ 30ºC (63ºF
~ 86ºF) in 1º increments.
Press the ON/OFF button to start the air conditioner.
NOTE:
In the Auto mode, the air conditioner can logically choose the mode
of Cooling, Fan, Heating and Dehumidifying by sensing the difference
between the actual ambient room temperature and the set temperature
on the remote control.
In the Auto mode, you can not switch the fan speed. It will be
automatically controlled by the unit.
If the Auto mode is not comfortable for you , the desired mode can be
selected manually.
Ensure the unit is plugged in and power is available.
Press the MODE button to select COOL, HEAT,(cooling &
heating models only) or FAN mode.
Press the TEMP button to set the desired temperature. The
temperature can be set within a range 17ºC ~ 30ºC (63ºF ~
86ºF) in 1º increments.
Press the FAN button to select the fan speed in four steps-
Auto, Low, Med,or High.
Press the ON/OFF button to start the air conditioner.
NOTE
In the FAN mode, the setting temperature is not displayed in the remote
control and you are not able to control the room temperature either. In
this case, only step 1, 3 and 4 may be performed.
1
1
1
2
2
2
3
3
3
4
1
3
2
3
1
2
FAN
TIMER
ON
TIMER
OFF
TEMP
SWING DIRECT
SLEEP
TURBO
LED
MODE
ON/OFF
ECO
FAN
TIMER
ON
TIMER
OFF
TEMP
SWING DIRECT
SLEEP
TURBO
LED
MODE
ON/OFF
ECO
4
1
3
2
3
1
2
FAN
TIMER
ON
TIMER
OFF
TEMP
SWING DIRECT
SLEEP
TURBO
LED
MODE
ON/OFF
ECO
FAN
TIMER
ON
TIMER
OFF
TEMP
SWING DIRECT
SLEEP
TURBO
LED
MODE
ON/OFF
ECO