1. DL manuals
  2. ECS
  3. Motherboard
  4. RS400-A
  5. Manual

ECS RS400-A Manual - Polski

Summary of RS400-A

  • Page 3

    Preface preface copyright this publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Versio...

  • Page 4

    Ii preface declaration of conformity this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: • this device may not cause harmful interference, and • this device must accept any interference received, including interference that may cause undesired operat...

  • Page 5

    Iii tttttable of contents able of contents able of contents able of contents able of contents preface i chapter 1 1 introducing the motherboard 1 introduction.................................................................................................1 feature.......................................

  • Page 6

    Iv integrated peripherals.................................................................38 power management setup...........................................................42 pnp/pci configurations.............................................................44 pc health status........................

  • Page 7

    1 introducing the motherboard chapter 1 introducing the motherboard introduction thank you for choosing the rs400-a motherboard. This motherboard is a high perfor- mance, enhanced function motherboard that supports lga775 pentium 4/celeron proces- sors for high-end business or personal desktop marke...

  • Page 8

    2 introducing the motherboard feature • accommodates the latest intel p4/celeron processors • supports a system bus (fsb) of 800/533mhz • supports “hyper-threading” technology cpu the rs400 northbridge (nb) and sb400 southbridge (sb) chipsets are based on an innovative and scalable architecture with...

  • Page 9

    3 introducing the motherboard • power management • wake-up alarms • cpu parameters • cpu and memroy timing some hardware specifications and software items are subject to change with out prior notice. Bios firmware this motherboard uses award bios that enables users to configure many system features ...

  • Page 10

    4 introducing the motherboard motherboard components.

  • Page 11

    5 introducing the motherboard table of motherboard components this concludes chapter 1. The next chapter explains how to install the motherboard. Users please note that ddr & ddr2 can’t both be applied at the same time on this motherboard. Users can use either ddr or ddr2 memory modules only! 1 cpu ...

  • Page 12

    6 introducing the motherboard memo.

  • Page 13

    7 installing the motherboard chapter 2 installing the motherboard installing the motherboard in a case refer to the following illustration and instructions for installing the motherboard in a case. Safety precautions • follow these safety precautions when installing the motherboard • wear a groundin...

  • Page 14

    8 installing the motherboard checking jumper settings this section explains how to set jumpers for correct configuration of the motherboard. Setting jumpers use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. When setting the jumpers, ensure ...

  • Page 15

    9 installing the motherboard checking jumper settings the following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper settings jumper type description setting (default) clr_cmos 3-pin clear cmos 1-2: normal 2-3: cmos clear before clearing the cmos, make sure to tur...

  • Page 16

    10 installing the motherboard connecting case components after you have installed the motherboard into a case, you can begin con- necting the motherboard components. Refer to the following: 1 connect the cpu cooling fan cable to cpu_fan. 2 connect the system cooling fan connector to sys_fan. 3 conne...

  • Page 17

    11 installing the motherboard cpu_fan: fan power connectors atx12v: atx 12v power connector pin signal name 4 +12v 3 +12v 2 ground 1 ground sys_fan/pwr_fan: fan power connectors pin signal name function 1 gnd system ground 2 +12v power +12v 3 sense sensor atx_pwr: atx 24-pin power connector pin sign...

  • Page 18

    12 installing the motherboard power/sleep/message waiting led connecting pins 2 and 4 to a single or dual-color, front panel mounted led provides power on/off, sleep, and message waiting indication. Reset switch supporting the reset function requires connecting pin 5 and 7 to a momentary-contact swi...

  • Page 19

    13 installing the motherboard installing hardware installing the processor caution: when installing a cpu heatsink and cooling fan make sure that you do not scratch the motherboard or any of the surface-mount resistors with the clip of the cooling fan. If the clip of the cooling fan scrapes across t...

  • Page 20

    14 installing the motherboard a. Unload the cap · use thumb & forefinger to hold the lifting tab of the cap. · lift the cap up and remove the cap completely from the socket. B. Open the load plate · use thumb & forefinger to hold the hook of the lever, pushing down and pulling aside unlock it. · lif...

  • Page 21

    15 installing the motherboard installing memory modules this motherboard accomodates four memory modules. It can support two 184-pin 2.5v unbuffered dimm, ddr 400/333/266 or two 240-pin 1.8v ddr2 667/533/400. The maximum memory capacity is 2gb. Ddr sdram memory module table you must install at least...

  • Page 22

    16 installing the motherboard table a: ddr qvl (qualified vender list) the following ddr400 memory modules have been tested and qualified for use with this motherboard. Size vendor model name infineon hyb25d256160bt-5b nanya nt5ds16m16bt-5 128mb nanya nt5ds16m16bt-5t infineon hyb25d256800bt-5b micro...

  • Page 23

    17 installing the motherboard installing a hard dish drive/cd-rom/sata hard drive this section describes how to install ide devices such as a hard disk drive and a cd-rom drive. About ide devices your motherboard has two ide channel interfaces (ide1 & ide2). Two ide ribbon cables supporting four ide...

  • Page 24

    18 installing the motherboard about sata connectors this motherboard features four sata connectors supporting a total of four drives. Sata , or serial ata (advanced technology attachment) is the standard interface for the ide hard drives which are currently used in most pcs. These connectors are wel...

  • Page 25

    19 installing the motherboard fdd: floppy disk connector this connector supports the provided floppy drive ribbon cable. After connecting the single end to the onboard floppy connector, connect the remaining plugs on the other end to the floppy drives correspondingly. Installing a floppy diskette dr...

  • Page 26

    20 installing the motherboard installing add-on cards the slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can increa...

  • Page 27

    21 installing the motherboard for the latest updates of the supported agp vga cards list, please visit ecs elitegroup website for details. Ecs elitegroup website: http://www.Ecs.Com.Tw table c : supported agp 8x/4x vga cards list vga chip model name 4x/8x asus geforce 4 mx440 64mb elsa 511 .Geforce ...

  • Page 28

    22 installing the motherboard follow these instructions to install an add-on card: 1 remove a blanking plate from the system case corresponding to the slot you are going to use. 2 install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seate...

  • Page 29

    23 installing the motherboard connecting optional devices refer to the following for information on connecting the motherboard’s optional devices: pin signal name audio1: front panel audio header this header allows the user to install auxiliary front-oriented microphone and line-out ports for easier...

  • Page 30

    24 installing the motherboard aux_in: auxliary in header (optional) pin signal name function 1 aux_l aux in left channel 2 gnd ground 3 gnd ground 4 aux_r aux in right channel sata1/2/3/4: serial ata connectors these connectors are use to support the new serial ata devices for the highest date trans...

  • Page 31

    25 installing the motherboard ir1: infrared port the mainboard supports an infrared (ir1) data port. Infrared ports allow the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, personal digital assistants (pdas), and other computers. Pin ...

  • Page 32

    26 installing the motherboard ps2 mouse use the upper ps/2 port to connect a ps/2 pointing device. Ps2 keyboard use the lower ps/2 port to connect a ps/2 keyboard. Parallel port use lpt1 to connect printers or other parallel communications (lpt1) devices. Serial port use the com port to connect seri...

  • Page 33

    27 using bios chapter 3 using bios about the setup utility the computer uses the latest award bios with support for windows plug and play. The cmos chip on the motherboard contains the rom setup instructions for configuring the motherboard bios. The bios (basic input and output system) setup utility...

  • Page 34

    28 using bios press del to enter setup pressing the delete key accesses the bios setup utility: key function esc exits the current menu oqrt oqrt oqrt oqrt oqrt scrolls through the items on a menu +/-/pu/pd modifies the selected field’s values f10 saves the current configuration and exits setup f1 d...

  • Page 35

    29 using bios updating the bios you can download and install updated bios for this motherboard from the manufacturer’s web site. New bios provides support for new peripherals, improvements in performance, or fixes for known bugs. Install new bios as follows: 1 if your motherboard has a bios protecti...

  • Page 36

    30 using bios standard cmos features this option displays basic information about your system. Date (mm:dd:yy) mon, nov 17 2004 time (hh:mm:ss) 13 : 4 : 54 f ide channel 0 master [st380011a] f f f ide channel 0 slave [none] ide channel 1 master [none] ide channel 1 slave [atapi 52x cdrom] ide channe...

  • Page 37

    31 using bios if you are setting up a new hard disk drive that supports lba mode, more than one line will appear in the parameter box. Choose the line that lists lba for an lba drive. Ide channel 0/1 master/slave/extended ide drives (auto) leave this item at auto to enable the system to automaticall...

  • Page 38

    32 using bios ata 66/100 ide cable msg. [enabled] cpu feature [press enter] hard disk boot priority [press enter] cpu l1 & l2 cache [enabled] hyper-threading technology [enabled] quick power on self test [enabled] first boot device [floppy] second boot device [hard disk] third boot device [cdrom] bo...

  • Page 39

    33 using bios limit cpuid maxval (disabled) this item can support prescott cpus for old os. Users please note that under nt 4.0, it must be set “enabled”, while under winxp, it must be set “disabled”. Tm2 bus vid (1.2000v) this item helps you to set the voltage of the throttled performance that will...

  • Page 40

    34 using bios boot up numlock status (on) this item defines if the keyboard num lock key is active when your system is started. Gate a20 option (fast) this item defines how the system handles legacy software that was written for an earlier generation of processors. Leave this item at the default val...

  • Page 41

    35 using bios advanced chipset features these items define critical timing parameters of the motherboard. You should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware. If you change the values incorrectly, you ...

  • Page 42

    36 using bios adjust dram timing (press enter) scroll to this item and press to view the following screen: f single addr translation (disable) this item enables or disables the single address translation function of dram timing. Laq bypass (enable) this item enables or disables the laq bypass functi...

  • Page 43

    37 using bios split channel (manual) this item allows users to manually or automacially set the split channel of the dram setting. Addr step 15t (00) this item allows users to manually adjust the value of addr step 15t of the dram timing. Addr step enable (01) this item allows users to manually adju...

  • Page 44

    38 using bios integrated peripherals these options display items that define the operation of peripheral components on the system’s input/output ports. South onchip ide device [press enter] south onchip pci device [press enter] superio device [press enter] init display first [pciex] surroundview dis...

  • Page 45

    39 using bios primary/secondary master/slave pio (auto) each ide channel supports a master device and a slave device. These four items let you assign the kind of pio (programmed input/output) was used by the ide devices. Choose auto to let the system auto detect which pio mode is best, or select a p...

  • Page 46

    40 using bios onboard fdc controller [enabled] onboard serial port 1 [3f8/irq4] onboard parallel port [378/irq7] parallel port mode [ecp] ecp mode use dma 3 usb ehci controller (enabled) use this item to enable or disable the onboard usb ehci controller function. Usb controller (enabled) use this it...

  • Page 47

    41 using bios init display first (pciex) use this item to decide which device to be the initial display device. Surroundview (disabled) ati surroundview function only support when using ati pcie graphics card onboard lan device (enabled) this item enables or disables the onboard lan device function....

  • Page 48

    42 using bios power management setup this option lets you control system power management. The system has various power- saving modes including powering down the hard disk, turning off the video, suspending to ram, and software power down that allows the system to be automatically resumed by certain...

  • Page 49

    43 using bios fresume event control (press enter) scroll to this item and press to view the following screen: f phoenix-awardbios cmos setup utility resume event control item help menu level f : move enter: select +/-/pu/pd:value f10:save esc:exit f1: general help mnlk f5:previous values f6:fail-saf...

  • Page 50

    44 using bios pnp/pci configurations this section describes configuring the pci bus system. Pci (peripheral component inter- connect) is a system, which allows i/o devices to operate at speeds nearing cpu’s when they communicate with own special components. All the options describes in this section ...

  • Page 51

    45 using bios pc health status on motherboards that support hardware monitoring, this item lets you monitor the param- eters for critical voltages, critical temperatures, and fan speeds. F shutdown temperature [disabled] cpu vcore 1.40v 3.30 v 3.23v 5.00 v 4.91v +12 v 11.58v voltage battery 3.15v cu...

  • Page 52

    46 using bios frequency/voltage control this item enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system. Phoenix-awardbios cmos setup utility frequency/voltage control item help f me...

  • Page 53

    47 using bios load optimized defaults option this option opens a dialog box that lets you install optimized defaults for all appropriate items in the setup utility. Press and then to install the defaults. Press and then to not install the defaults. The optimized defaults place demands on the system ...

  • Page 54

    48 using bios save & exit setup option highlight this item and press to save the changes that you have made in the setup utility and exit the setup utility. When the save and exit dialog box appears, press to save and exit, or press to return to the main menu: exit without saving highlight this item...

  • Page 55

    49 using the motherboard software chapter 4 using the motherboard software about the software cd-rom the support software cd-rom that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief descripti...

  • Page 56

    50 using the motherboard software setup tab setup click the setup button to run the software installation program. Select from the menu which software you want to install. Browse cd the browse cd button is the standard windows command that allows you to open windows explorer and show the contents of...

  • Page 57

    51 using the motherboard software 2. Click next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recommended. 4. Click next run the installation wizard. An item installation screen appears: 5. Follow the instructions on the screen to inst...

  • Page 58

    52 using the motherboard software manual installation insert the cd in the cd-rom drive and locate the path.Doc file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory a...

  • Page 59: Français

    Multi-language translation français les chipsets rs400 northbridge (nb) et sb400 southbridge (sb) sont basés sur une architecture novatrice et dimensionnable avec une fiabilité et des performances prouvées. Mémoire chipset • prend en charge l’interface sdram ddr/ddr2 à double canal de 128 bits • 1 x2...

  • Page 60: E/s Intégrées

    Multi-language translation français e/s intégrées la carte mère possède un jeu complet de ports d’e/s et de connecteurs: • deux ports ps/2 pour souris et clavier • un port série • un port parallèle • un port vga • un port 1394a (optionnel) • un port lan (optionnel) • prises audio pour microphone, li...

  • Page 61: Deutsche

    Multi-language translation deutsche die rs400 northbridge (nb) und sb400 southbridge (sb) chipsätze basieren auf einer innovativen und skalierbaren architektur mit bewiesener zuverlässigkeit und leistung. Speicher audio chipsatz • unterstützt 128-bit dualkanal ddr/ddr2 sdram-interface • 1 x2 (auf x4...

  • Page 62: Deutsche

    Multi-language translation deutsche integrierte i/o-schnittstellen das motherboard verfügt über einen kompletten satz von i/o-schnittstellen und anschlüssen: • zwei ps/2-schnittstellen für tastatur und maus • eine serielle schnittstelle • eine parallele schnittstelle • eine vga- schnittstelle • eine...

  • Page 63: Memoria

    Multi-language translation italiano i chipset rs400 northbridge (nb) e sb400 southbridge (sb) sono basati su un’innovativa architettura scalabile e offrono collaudata affidabilità e prestazioni comprovate. Memoria audio chipset • supporto di interfaccia sdramm ddr/ddr2 dual-channel a 128 bit • 1 inte...

  • Page 64: I/o

    Multi-language translation italiano i/o integrati la scheda madre offre una serie completa di porte e connettori i/o: • due porte ps/2 per mouse e tastiera • una porta seriale • una porta parallela • una porta vga • una porta 1394a (opzionale) • una porta lan (opzionale) • prese jack audio per micro...

  • Page 65: Español

    Multi-language translation español el chipset rs400 northbridge (nb) y sb400 southbridge (sb) se basan de una arquitectura innovadora y escalable con fiabilidad y rendimiento comprobados. Memoria codec de audio ac’97 chipset • soporta interfaz sdram ddr/ddr2 de canal dual de 128- bit • 1 interfaz x2 ...

  • Page 66: Español

    Multi-language translation español i/o integrado la placa principal tiene un juego completo de puertos y conectores i/o: • dos puertos ps/2 para ratón y teclado • un puerto serial • un puerto paralelo • un puerto vga • un puerto 1394a (optativo) • un puerto lan (optativo) • clavijas de audio para mi...

  • Page 67: Memória

    Multi-language translation português o conjunto de chips rs400 northbridge (nb) e sb400 southbridge (sb) é baseado numa arquitectura inovadora e escalável com fiabilidade e performance provadas. Memória Áudio conjunto de chips • suporta interface ddr/ddr2 sdram com bicanal de 128 bits • 1 x2 (expansí...

  • Page 68: I/o Integrado

    Multi-language translation português i/o integrado a motherboard possui um conjunto completo de portas i/o e conectores: • duas portas ps/2 para rato e teclado • uma porta de série • uma porta paralela • uma porta vga • uma porta 1394a (opcional) • uma porta lan (opcional) • fichas áudio para microf...

  • Page 69

    Multi-language translation 日本語 チップセット rs400 northbridge (nb)と sb400 southbridge (sb)チップセットは、実証された信 頼性と性能を持つ革新的で拡張性のあるアーキテクチャに基づいています。 • 128-ビットのデュアルチャネルのddr/ddr2 sdram インターフェー スをサポート • 1つの x2 ( x4に拡張可能) a-link express インターフェース (pci express 1.0a に対応)でati ixpに接続 • グラフィックインターフェースとなる pci express x16 インタ...

  • Page 70

    Multi-language translation 日本語 統合の入出力ポート マザーボードには、次のi/oポートやコネクタを揃えています。 • マウスとキーボード用のps/2ポート x2 • シリアルポート x1 • パラレルポート x1 • vgaポート x1 • 1394a ポート x1(オプション) • lanポート x1(オプション) • マイク、ラインイン、ラインアウト用オーディオジャック biosファームウェア 本マザーボードはaward biosを採用し、次の機能を 含む 多様なシステムの構成をを サポートします。 • 電源管理 • ウェークアップアラーム • cpuパラメー...

  • Page 71

    Multi-language translation 한국어 rs400 northbridge (nb) 및 sb400 southbridge (sb) 칩셋은 혁신적이고 범위성을 지닌 아키텍쳐를 기반으로 인정된 신뢰성과 성능을 지닌다. 메모리 오디오 코덱 칩셋 • 128 비트 듀얼 채널 ddr/ddr2 sdram 인터페이스 지 원 • ati ixp 연결을 위한 1 x2 (x4 확장 가능) a-link express 인터페이스 (pci express 1.0a 부합) • 그래픽 인터페이스로 1 개의 pci express x16 지원, pci ex...

  • Page 72

    Multi-language translation 한국어 통합 i/o 본 마더보드는 풀 셋트의 i/o 포트 및 커넥터가 있다: • 마우스 및 키보드용 ps/2 포트 2 개 • 시리얼 포트 1 개 • 패러럴 포트 1 개 • vga 포트 1 개 • 1394a 포트 1 개 (선택 사항) • lan 포트 1 개 (선택 사항) • 마이크, 라인 입력 및 라인 출력용 오디오 잭 bios 펌웨어 본 마더보드는 다음과 같은 시스템 특성을 구성할 수 있는 award bios 를 사용한다: • 전원 관리 • wake-up 알람 • cpu 파라미터 • ...

  • Page 73

    Multi-language translation 繁體中文 rs400 北橋(nb)及sb400 南橋(sb)晶片組在研發設計上採用了創新且具擴充性之架構， 具備優良的可靠性及性能。 功能 處理器 rs400-a 使用 lga775 型的pentium 4，具有如下功能： • 支援intel p4 /celeron 處理器； • 支援高達800/533mhz之系統匯流排(fsb)； • 支援使用超執行緒(hyper-threading)技術之cpu。 利用“超執行緒(ht)”技術，可使作業系統在相當於裝上了兩具處理器的狀態下運 作：利用一個”實體”處理器模擬出兩個獨立的”邏輯”處理器，同時...

  • Page 74

    Multi-language translation 繁體中文 整合 i/o 主機板具有一組齊全的 i/o 連接埠及連接頭： • 2 個 ps/2 埠，供滑鼠與鍵盤使用 • 1 個串列埠 • 1 個平行埠 • 1 個vga埠 • 1 個1394a 埠 (選購) • 1 個區域網路埠 (選購) • 麥克風音頻插座、線級輸入及線級輸出。 bios 韌體 本主機板使用award bios，使用者可以組態設定許多系統功能，包括如下： • 電源管理 • 喚醒警鈴 • cpu參數 • cpu及記憶體的時脈定時 此外，也可藉由參數的設定，調整處理器的時脈速度。 部份硬體規格和軟體內容可能會在未經通知的情況下...

  • Page 75

    Multi-language translation 简体中文 rs400 北桥 (nb) 和 sb400 南桥 (sb) 芯片组是基于一种新型的、可扩展的架构，能 提供已经证明的可靠性和高性能。 内存 音频 芯片组 • 支持 128-位双通道 ddr/ddr2 sdram 接口 • 1 x2 (可扩展到 x4) a-link express 接口（符合 pci express 1.0a 标准）用于连接到 ati ixp • 支持 1 个 pci express x16 用于图形接口，完全符合 pci express base 规格 1.0a。 • 支持 4 个用于通用连接的 x1 pci e...

  • Page 76

    Multi-language translation 简体中文 集成 i/o 此主板具有完整的 i/o 端口和插孔： • 2 个用于连接鼠标和键盘的 ps/2 端口 • 1 个串口 • 1 个并口 • 1 个 vga 端口 • 1 个 1394a 端口（可选） • 1 个 lan 端口（可选） • 麦克风、线入和线出声音插孔 bios 此主板使用 award bios，可以让用户自己配置以下系统功能： • 电源管理 • 唤醒报警 • cpu 参数 • cpu 和记忆定时 还可用于设置不同处理器时钟速度的参数。 . 某些硬件规格和软件项目若有更改恕不另行通知。 主板 rs400-a支持 ultr...

  • Page 77: Русский

    Multi-language translation Русский Чипсеты rs400 «Северный мост» (northbridge, nb) и sb400 «Южный мост» (southbridge, sb) построены с использованием инновационной масштабируемой архитектуры, обеспечивающей высокую надежность и производительность. Память Чипсет • Поддерживает 128-битную двухканальную...

  • Page 78: Русский

    Multi-language translation Русский Интегрированный вход/выход Плата снабжена полным набором портов входа/выхода и разъемов: • Два порта ps/2 для подключения мыши и клавиатуры • Один серийный порт • Один параллельный порт • Один порт vga • Один порт 1394a (опционально) • Один порт lan (опционально) •...

  • Page 79: Polski

    Multi-language translation polski mostek północny (nb) rs400 i mostek południowy (sb) sb400 chipsetu oparty jest na nowatorskiej i skalowalnej architekturze o sprawdzonej niezawodności i funkcjonalnoœci. Pamięć chipset • obsługuje 128-bitowe dwukanałowe złącze ddr/ddr2 sdram • 1 złącze x2 (rozszerza...

  • Page 80: Polski

    Multi-language translation polski zintegrowane we/wy płyta głwna wyposażona jest w pełny zestaw gniazd i złączy we/wy: • dwa gniazda ps/2 dla myszy i klawiatury • jedno gniazdo szeregowe • jedno gniazdo równoległe • jedno gniazdo vga • jedno gniazdo 1394a (opcjonalnie) • jedno gniazdo lan (opcjonaln...

  • Page 81: Česky

    Multi-language translation Česky Čipy northbridge (nb) rs400 a southbridge (sb) sb400 jsou založeny na inovativní a škálovatelné architektuře s ověřenou spolehlivostí a výkonností. Paměť zvukový Čipová sada • podpora 128bitového dvoukanálového rozhraní ddr/ddr2 sdram • 1 x2 (rozšířitelné až na x4) r...

  • Page 82: Česky

    Multi-language translation Česky integrovaný vstup/výstup základní deska je vybavena kompletní sadou vstupních portů a konektorů i/o: • dva porty ps/2 pro myš a klávesnici • jeden sériový port • jeden paralelní port • jeden vga port • jeden port 1394a (volitelně) • jeden port lan (volitelně) • zvuko...

  • Page 83: Română

    Multi-language translation română seturile de chipuri rs400 northbridge (nb) şi sb400 southbridge (sb) se bazează pe o arhitectură inovatoare şi scalabilă, care s-a impus deja prin fiabilitate şi performanţă. Memoria audio setul de chipuri • suportă interfaţă ddr/ddr2 sdram pe 128 de biţi, cu canal d...

  • Page 84: Română

    Multi-language translation română i/o integrată placa de bază este dotată cu un set complet de porturi şi conectoare i/o: • două porturi ps/2, pentru mouse şi tastatură • un port serial • un port paralel • un port vga • un port 1394a (opţional) • un port lan (opţional) • mufe audio pentru microfon, ...

  • Page 85: Памет

    Multi-language translation Български Чипсетът със северен мост rs400 (nb) и южен мост sb400 (sb) е изграден на базата на оригинална архитектура с възможност за надстройка с доказана надеждност и производителност. Памет audio Чипсет • поддръжка на 128-bit двуканален ddr/ddr2 sdram интерфейс • Интерфе...

  • Page 86: Bios Firmware

    Multi-language translation Български Интегриран Вход/Изход контролер Дънната платка има пълен набор от i/o портове и конектори: • два ps/2 порта за мишка и клавиатура • един сериен порт • един паралелен порт • един vga порт • един 1394a порт (опция) • един lan порт (опция) • Аудио жакове за микрофон...

  • Page 87: Magyar

    Multi-language translation magyar a rs400 northbridge (nb) és sb400 southbridge (sb) lapkakészletek egy új és méretezhető, nagy megbízhatóságú és teljesítőképességű architektúrára épülnek. Memória lapkakészlet • 128 bites duál csatornás ddr/ddr2 sdram interfészt támogat • egy 2-szeres (4-szeresre bõ...

  • Page 88: Magyar

    Multi-language translation magyar beépített i/o az alaplapot az i/o portok és csatlakozók teljes készletével szerelték fel: • két ps/2 port az egér és a billentyűzet számára • egy soros port • egy párhuzamos port • egy vga port • egy 1394a port (választható) • egy lan port (választható) • audio csat...