- DL manuals
- ECS
- Motherboard
- Z97-PK
- User Manual
ECS Z97-PK User Manual - Chapter 5
69
Z97-PK USER MANUAL
Chapter 5
Chapter 5
Intel
®
Rapid Storage Technology RAID Configuration
The Intel
®
Rapid Storage Technology allows you to configure RAID 0, and 1 sets on the
external Serial ATA hard disk drives.
1.
Install the external Serial ATA hard disk drive (HDD) on your system.
2.
Set the SATA Mode item in the BIOS from “IDE Mode” to “RAID Mode”
See section “SATA Configuration” for details.
Before creating a RAID set
1.
One SATA HDD.
2.
A write-enabled floppy disk.
3.
Microsoft
®
Windows
®
OS installation disk (Windows 7/8/8.1).
4.
Motherboard support CD with Intel
®
Rapid Storage Technology RAID driver.
Complete the following steps before you create a RAID set:
Prepare the following items:
Determines how SATA
controller(s) operate.
Main
Advanced
Chipset M.I.B. III Security Boot Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
SATA Configuration
SATA Mode
AHCI Mode
SATA Port1
Not Present
Spin Up Device
Disabled
External SATA
Disabled
SATA Port2
Not Present
Spin Up Device
Disabled
External SATA
Disabled
SATA Port3
Not Present
Spin Up Device
Disabled
External SATA
Disabled
SATA Port4
Not Present
Spin Up Device
Disabled
External SATA
Disabled
SATA Port5
Not Present
Spin Up Device
Disabled
External SATA
Disabled
SATA Port6
Not Present
Spin Up Device
Disabled
External SATA
Disabled
Summary of Z97-PK
Page 1
Z97-pk user manual preface copyright this publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the aut...
Page 2
Ii z97-pk user manual declaration of conformity this device complies with part 15 of the fcc rules. Operation is subject to the follow- ing conditions: • this device may not cause harmful interference, and • this device must accept any interference received, including interference that may cause und...
Page 3: Chapter 2
Iii z97-pk user manual chapter 2 7 installing the motherboard 7 safety precautions.............................................................................7 installing the motherboard in a chassis......................................7 checking jumper settings.......................................
Page 4: Chapter 7
Iv z97-pk user manual updating the bios...........................................................................63 chapter 7 77 trouble shooting 77 start up problems during assembly..............................................77 start up problems after prolong use....................................
Page 5: Chapter 1
1 z97-pk user manual chapter 1 chapter 1 introducing the motherboard introduction thank you for choosing the z97-pk motherboard. This motherboard is a high perfor- mance, enhanced function motherboard designed to support the lga1150 socket for intel ® 4 th and 5 th generation core tm family processo...
Page 6: Chapter 1
Chapter 1 2 z97-pk user manual cpu specifications • intel ® z97 chipset chipset • dual-channel ddr3 memory architecture • 4 x 240-pin ddr3 dimm sockets support up to 32 gb • supports ddr3 1600/1333 mhz sdram memory • supported by intel ® z97 express chipset - 6 x serial ata 6gb/s devices - raid 0, r...
Page 7: Chapter 1
3 z97-pk user manual chapter 1 • ami bios with 64mb spi flash rom • supports plug and play, str (s3)/ std(s4), hardware monitor • audio, lan, can be disabled in bios • f7 hot key for boot up devices option • supports acpi & dmi • supports pgup clear cmos hotkey (has ps2 kb model only) • supports 3 i...
Page 8: Chapter 1
Chapter 1 4 z97-pk user manual motherboard components.
Page 9: Chapter 1
5 z97-pk user manual chapter 1 table of motherboard components label components 1. Cpu socket lga1150 socket for intel ® 4 th and 5 th generation core tm family processors 2. Pwr_fan 4-pin power cooling fan connector 3. Sys_fan 4-pin system cooling fan connector 4. Cpu_fan 4-pin cpu cooling fan conn...
Page 10: Chapter 1
Chapter 1 6 z97-pk user manual i/o ports 1. Ps/2 combo port use the ps/2 combo port to connect the ps/2 keyboard or ps/2 mouse. 2. Usb 2.0 ports use the usb 2.0 ports to connect usb 2.0 devices. 3. Vga port connect your monitor to the vga port. 4. Dvi port connect your monitor to the dvi port. 5. Hd...
Page 11: Chapter 2
Chapter 2 7 z97-pk user manual chapter 2 installing the motherboard 2-1. Safety precautions 2-2. Installing the motherboard in a chassis this motherboard carries a micro atx form factor of 244 x 220 mm. Choose a chassis that accommodates this from factor. Make sure that the i/o template in the chass...
Page 12: Chapter 2
Chapter 2 8 z97-pk user manual the following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. To avoid the system instability after clearing cmos, we recommend users to enter the main bios setting page to “load default settings” and then “save and exit setup”. 2-3. Check...
Page 13: Chapter 2
Chapter 2 9 z97-pk user manual 2-4. Installing hardware 2-4-1. Installing the processor • this motherboard has an lga1150 socket. • when choosing a processor, consider the performance requirements of the system. Performance is based on the processor design, the clock speed and system bus frequency o...
Page 14: Chapter 2
Chapter 2 10 z97-pk user manual d. Rotate the load plate onto the package ihs (intergraded heat spreader). Engage the load lever while pressing down lightly onto the load plate. Secure the load lever with the hook under retention tab. Then the cover will flick automatically. Please save and replace ...
Page 15: Chapter 2
Chapter 2 11 z97-pk user manual a. Apply some thermal grease onto the contacted area between the heatsink and the cpu, and make it to be a thin layer. B. Fasten the cooling fan supporting base onto the cpu socket on the motherboard. And make sure the cpu fan is plugged to the cpu fan connector. C. C...
Page 16: Chapter 2
Chapter 2 12 z97-pk user manual 2-4-3. Installing memory modules • this motherboard accommodates four memory modules. It can support four 240-pin ddr3 1600/1333 mhz. • do not remove any memory module from its antistatic packaging until you are ready to install it on the motherboard. Handle the modul...
Page 17: Chapter 2
Chapter 2 13 z97-pk user manual recommend memory configuration model sockets ddr3_1 ddr3_2 ddr3_3 ddr3_4 1 dimm ~ populated ~ ~ 1 dimm ~ ~ ~ populated 2 dimms ~ populated ~ populated 3 dimms populated populated ~ populated 3 dimms ~ populated populated populated 4 dimms populated populated populated...
Page 18: Chapter 2
Chapter 2 14 z97-pk user manual 2-4-4. Installing add-on cards the slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you c...
Page 19: Chapter 2
Chapter 2 15 z97-pk user manual 1 remove a blanking plate from the system case corresponding to the slot you are going to use. 2 install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. 3 secure the metal bracket of the ca...
Page 20: Chapter 2
Chapter 2 16 z97-pk user manual 2-4-5. Connecting optional devices refer to the following for information on connecting the motherboard’s optional devices: no. Components no. Components 1 usb3f 7 tpm 2 case 8 lpt 3 me_unlock 9 spdifo1 4 sata_1/2 10 cir1 5 sata3~6 11 com 6 f_usb1~3 12 f_audio1.
Page 21: Chapter 2
Chapter 2 17 z97-pk user manual please make sure that the usb cable has the same pin assignment as indi- cated above. A different pin assignment may cause damage or system hang- up. This motherboard implements one usb 3.0 header supporting 2 extra front usb 3.0 ports, which delivers 5gb/s transfer r...
Page 22: Chapter 2
Chapter 2 18 z97-pk user manual 3. Me_unlock: me unlock header sata1~6 connectors are used to support the serial ata 6.0gb/s device, simpler disk drive cabling and easier pc assembly. It eliminates limitations of the current paral- lel ata interface. But maintains register compatibility and software...
Page 23: Chapter 2
Chapter 2 19 z97-pk user manual unlike f_usb2 & f_usb3, f_usb1 supports ez charger technology, provides 3 times current than general usb port in off mode for usb devices. It is useful and excellent, especially for the iphone, ipad and ipod touch devices that need a large amount of current for faster...
Page 24: Chapter 2
Chapter 2 20 z97-pk user manual this is an optional header that provides an spdifo (sony/philips digital interface) output to digital multimedia device through optical fiber or coaxial connector. 9. Spdifo1: spdif out header this is a header that can be used to connect to the printer, scanner or oth...
Page 25: Chapter 2
Chapter 2 21 z97-pk user manual 11. Com: onboard serial port header connect a serial port extension bracket to this header to add a serial port to your system. 10. Cir1: consumer infrared header.
Page 26: Chapter 2
Chapter 2 22 z97-pk user manual if you use ac ’ 97 front panel, please t ick off the option of “ disabled front panel detect ”. If you use hd audio front panel, please don ’ t t ick off “ disabled front panel detect ” . * for reference only ac ’ 97 audio configuration: to enable the front panel audi...
Page 27: Chapter 2
Chapter 2 23 z97-pk user manual if you use ac ’ 9 7 front panel, please don ’ t t ick off “ using front jack detect ” . If you use hd audio front panel, please t ick off the option of “ using front jack detect ”. * for reference only.
Page 28: Chapter 2
Chapter 2 24 z97-pk user manual 2-4-6. Installing a sata hard drive about sata connectors your motherboard features six sata connectors supporting a total of six drives. Sata refers to serial ata (advanced technology attachment) is the standard interface for the ide hard drives which are currently u...
Page 29: Chapter 2
Chapter 2 25 z97-pk user manual no. Components no. Components 1 pwr_fan 5 f_panel 2 sys_fan 6 spk 3 cpu_fan 7 atx_12v 4 atx_power ~ ~ after you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 2-4-7. Connecting case components.
Page 30: Chapter 2
Chapter 2 26 z97-pk user manual 1. Pwr_fan (power cooling fan connector) & 2. Sys_fan (system cooling fan connector) & 3. Cpu_fan (cpu cooling fan connector) connect the cpu cooling fan cable to cpu_fan. Users please note that the fan connector supports the cpu cooling fan of 1.1a ~ 2.2a (26.4w max)...
Page 31: Chapter 2
Chapter 2 27 z97-pk user manual 5. F_panel: front panel header the front panel header (f_panel) provides a standard set of switch and led headers commonly found on atx or micro atx cases. Refer to the table below for information: the atx 24-pin connector allows you to connect to atx v2.X power suppl...
Page 32: Chapter 2
Chapter 2 28 z97-pk user manual this concludes chapter 2. The next chapter covers the bios. Hard drive activity led connecting pins 1 and 3 to a front panel mounted led provides visual indication that data is being read from or written to the hard drive. For the led to function properly, an ide driv...
Page 33: Chapter 3
Chapter 3 z97-pk user manual 29 about the setup utility the computer uses the latest “american megatrends inc. ” bios with support for windows plug and play. The cmos chip on the motherboard contains the rom setup instructions for configuring the motherboard bios. The bios (basic input and output sy...
Page 34: Chapter 3
Chapter 3 z97-pk user manual 30 press the delete key to access bios setup utility. Resetting the default cmos values when powering on for the first time, the post screen may show a “cmos settings wrong” message. This standard message will appear following a clear cmos data at factory by the manufact...
Page 35: Chapter 3
Chapter 3 z97-pk user manual 31 using bios when you start the setup utility, the main menu appears. The main menu of the setup utility displays a list of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other...
Page 36: Chapter 3
Chapter 3 z97-pk user manual 32 main menu system date & time the date and time items show the current date and time on the computer. If you are running a windows os, these items are automatically updated whenever you make changes to the windows date and time properties utility. System language (engl...
Page 37: Chapter 3
Chapter 3 z97-pk user manual 33 the advanced menu items allow you to change the settings for the cpu and other system. Advanced menu lan configuration parameters main advanced chipset m.I.B. Iii security boot exit +/- : change opt. Enter/dbl click : select : select screen /click: select item f1: gen...
Page 38: Chapter 3
Chapter 3 z97-pk user manual 34 smart fan mode (normal) this item allows you to select the fan mode (normal, quiet, silent, or manual) for a better operation environment. If you choose normal mode, the fan speed will be auto adjusted depending on the cpu temperature. If you choose quite mode, the fa...
Page 39: Chapter 3
Chapter 3 z97-pk user manual 35 smart fan start pwm value (180) smart fan start pwm temp (dts) (45) this item is used to set the start pwm value of the smart fan. This item is used to set the start temperature of the smart fan. Deltat (3) this item specifies the range that controls cpu temperature a...
Page 40: Chapter 3
Chapter 3 z97-pk user manual 36 power management setup this page sets up some parameters for system power management operation. Resume by pme (disabled) the system can be turned off with a software command. If you enable this item, the system can automatically resume if there is an incoming call on ...
Page 41: Chapter 3
Chapter 3 z97-pk user manual 37 acpi settings the item in the menu shows the highest acpi sleep state when the system enters suspend. Acpi sleep state [s3(suspend to ram)] this item allows user to enter the acpi s3 (suspend to ram) sleep state (default). Press to return to the advanced menu page. Ma...
Page 42: Chapter 3
Chapter 3 z97-pk user manual 38 cpu configuration the item in the menu shows the cpu. Intel(r) core(tm) i7-4765t cpu @ 2.00ghz this is display-only field and displays the information of the cpu installed in your computer. Em64t (supported) this item shows the computer supports em64t. Processor speed...
Page 43: Chapter 3
Chapter 3 z97-pk user manual 39 press to return to the advanced menu page. Execute disable bit (enabled) this item allows the processor to classify areas in memory by where application code can execute and where it cannot. When a malicious worm attempts to insert code in the buffer, the processor di...
Page 44: Chapter 3
Chapter 3 z97-pk user manual 40 sata configuration use this item to show the mode of serial sata configuration options. Sata mode (ahci mode) use this item to select sata mode. Determines how sata controller(s) operate. Main advanced chipset m.I.B. Iii security boot exit +/- : change opt. Enter/dbl ...
Page 45: Chapter 3
Chapter 3 z97-pk user manual 41 all usb devices (enabled) use this item to enable or disable all usb devices. Usb configuration use this item to show the information of usb configuration. Legacy usb support (enabled) use this item to enable or disable support for legacy usb devices. Main advanced ch...
Page 46: Chapter 3
Chapter 3 z97-pk user manual 42 trusted computing use this item to show the information of trusted computing configuration. Enables or disables bios support for security device. O.S. Will not show security device. Tcg efi protocol and int1a interface will not be available. Main advanced chipset m.I....
Page 47: Chapter 3
Chapter 3 z97-pk user manual 43 use this item to show the information of intel(r) rapid start technology. Intel(r) rapid start technology intel(r) rapid start technology (disabled) use this item to enable or disable the intel(r) rapid start technology. Enable or disable intel(r) rapid start technolo...
Page 48: Chapter 3
Chapter 3 z97-pk user manual 44 the chipset menu items allow you to change the settings for the north bridge chipset, south bridge chipset and other system. Chipset menu system agent (sa) parameters. Main advanced chipset m.I.B. Iii security boot exit +/- : change opt. Enter/dbl click : select : sel...
Page 49: Chapter 3
Chapter 3 z97-pk user manual 45 igd memory (64m) this item shows the information of the igd (internal graphics device) memory. This item allows you to select graphics controller to use as the primary boot device. Dvmt memory (256m) when set to fixed mode, the graphics driver will reserve a fixed pos...
Page 50: Chapter 3
Chapter 3 z97-pk user manual 46 multi-monitor technology please note that multi-monitor technology supports up to four monitors: one or two intel integrated graphics and one or two pci-express graphics devices under windows 7/8. Multi-monitor technology can help you to increase the area available fo...
Page 51: Chapter 3
Chapter 3 z97-pk user manual 47 step 3. Enable igd multi-monitor from bios. In the following bios screen, please set igd multi-monitor to [enabled]. Step 2. Install all the drivers of pci-express graphic cards. Click the browse cd item, then appears the following screen. Select the driver you want t...
Page 52: Chapter 3
Chapter 3 z97-pk user manual 48 2.Select display devices, set the multiple displays option and to extend destop for display “multi-monitor technology”. Change the apprearance of your displays control panel all control panel items display screen resolution search control panel 1 3 4 detect identify 3...
Page 53: Chapter 3
Chapter 3 z97-pk user manual 49 change the apprearance of your displays control panel all control panel items display screen resolution search control panel 1 detect identify 4. Al1717 display: resolution: 1920 x 1200 (recommended) orientation: landscape disconnect this display multiple displays: ma...
Page 54: Chapter 3
Chapter 3 z97-pk user manual 50 pch configuration scroll to this item and press to view the following screen: restore ac power loss (power off) this item enables your computer to automatically restart or return to its operating status. Azalia hd audio (enabled) this item enables or disables azalia h...
Page 55: Chapter 3
Chapter 3 z97-pk user manual 51 me configuration scroll to this item and press to view the following screen: me control (enabled) use this item to enable or disable the me firmware. Main advanced chipset m.I.B. Iii security boot exit +/- : change opt. Enter/dbl click : select : select screen /click:...
Page 56: Chapter 3
Chapter 3 z97-pk user manual 52 this page enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system. M.I.B. Iii (mb intelligent bios iii) menu cpu configuration scroll to this item to vi...
Page 57: Chapter 3
Chapter 3 z97-pk user manual 53 enhanced intel speedstep technology (enabled) this item allows users to enable or disable the eist (enhanced intel speedstep tech- nology). Turbo mode (enabled) this item allows you to control the intel turbo boost technology. 1 /2 core ratio limit (32) these items sh...
Page 58: Chapter 3
Chapter 3 z97-pk user manual 54 main advanced chipset m.I.B. Iii security boot exit the selection of memory profiles which impacts memory sizing behavior. Memory configuration scroll to this item to view the following screen: +/- : change opt. Enter/dbl click : select : select screen /click: select ...
Page 59: Chapter 3
Chapter 3 z97-pk user manual 55 mc lock (enabled) this item allows you to enable or disable capacity to lock mc registers or not. Memory rc version (1.8.0.0) this item shows the information of the memory rc version. Memory frequency (1333 mhz) this item shows the information of the memory frequency....
Page 60: Chapter 3
Chapter 3 z97-pk user manual 56 cmd tri-state (enabled) this item allows you to enable or disable the cmd tri-state (ending of the training). Memory scrambler (enabled) this item allows you to enable or disable the memory scrambler. Wrc fast boot (enabled) this item allows you to enable or disable t...
Page 61: Chapter 3
Chapter 3 z97-pk user manual 57 main advanced chipset m.I.B. Iii security boot exit +/- : change opt. Enter/dbl click : select : select screen /click: select item f1: general help f2: previous values f3: optimized defaults f4: save & exit esc/right click: exit graphics core ratio limit (22) this ite...
Page 62: Chapter 3
Chapter 3 z97-pk user manual 58 over voltage configuration scroll to this item to view the following screen: pch core voltage 1.056 v (auto) this item allows you to adjust the pch core voltage. Dimm voltage 1.488 v (auto) this item allows you to adjust the dimm voltage. Processor input voltage (auto...
Page 63: Chapter 3
Chapter 3 z97-pk user manual 59 cpu/ring/gt voltage mode (adaptive) this item allows you to set the cpu/ring/gt voltage mode. Cpu/ring/gt/uncore/ioa/iod voltage offset(mv) (0) this item allows you to adjust the cpu/ring/gt/uncore/ioa/iod voltage offset from -1000 to 998mv. Offset prefix (+) this ite...
Page 64: Chapter 3
Chapter 3 z97-pk user manual 60 this page enables you to set setup administrator password and user password. Security menu administrator password status (not install) this item shows administrator password installed or not. User password status (not install) this item shows user password installed o...
Page 65: Chapter 3
Chapter 3 z97-pk user manual 61 main advanced chipset m.I.B. Iii security boot exit +/- : change opt. Enter/dbl click : select : select screen /click: select item f1: general help f2: previous values f3: optimized defaults f4: save & exit esc/right click: exit this page enables you to set the keyboa...
Page 66: Chapter 3
Chapter 3 z97-pk user manual 62 boot override use this item to select the boot device. Save options this item enables you to save the options that you have made. Save changes this item enables you to save the changes that you have made. Discard changes this item enables you to discard any changes th...
Page 67: Chapter 3
Chapter 3 z97-pk user manual 63 updating the bios you can download and install updated bios for this motherboard from the manufacturer’s website. New bios provides support for new peripherals, improve- ments in performance, or fixes for known bugs. Install new bios as follows: this concludes chapter...
Page 68: Chapter 3
Chapter 3 z97-pk user manual 64 memo.
Page 69: Chapter 4
65 z97-pk user manual chapter 4 chapter 4 using the motherboard software the auto-install dvd-rom makes it easy for you to install the drivers and software. The support software dvd-rom disc loads automatically under windows xp/7/8. When you insert the dvd-rom disc in the dvd-rom drive, the auto-run...
Page 70: Chapter 4
66 z97-pk user manual chapter 4 2. Click next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recommended. 5. Follow the instructions on the screen to install the items. 4. Click next to run the installation wizard. An item installation ...
Page 71: Chapter 4
67 z97-pk user manual chapter 4 if the auto-install dvd-rom does not work on your system, you can still install drivers through the file manager for your os (for example, windows explorer). Look for the chipset and motherboard model, and then browse to the directory and path to begin installing the ...
Page 72: Chapter 4
68 z97-pk user manual chapter 4 eblu ecs eblu utility makes bios update faster and easier. Eblu will list the latest bios with a default check-mark. Click”install” button to install. Edlu ecs edlu utility makes updating drivers fast and easy. Edlu saves time and hassle by listing all the latest driv...
Page 73: Chapter 5
69 z97-pk user manual chapter 5 chapter 5 intel ® rapid storage technology raid configuration the intel ® rapid storage technology allows you to configure raid 0, and 1 sets on the external serial ata hard disk drives. 1. Install the external serial ata hard disk drive (hdd) on your system. 2. Set t...
Page 74: Chapter 5
70 z97-pk user manual chapter 5 2. The main intel ® rapid storage technology raid bios menu appears. Entering intel ® rapid storage technology raid bios utility 1. During post, press to enter the intel ® rapid storage technology raid bios menu. 3. Use the arrow keys to move the color bar and navigat...
Page 75: Chapter 5
71 z97-pk user manual chapter 5 2. When the raid level item is highlighted, use the up/down arrow key to select the raid set that you want to create. Creating a raid set 1. In the main intel ® rapid storage technology raid bios menu, highlight create raid volume using the up/down arrow key then pres...
Page 76: Chapter 5
72 z97-pk user manual chapter 5 pressing deletes all the data in the hdds. 5. The following screen appears, displaying the relevant information about the raid set you created. Users please be noted that raid 0 (stripe) is set to accelerate the data access, and raid 1 (mirror) is set to provide the d...
Page 77: Chapter 5
73 z97-pk user manual chapter 5 deleting a raid set 1. In the main intel ® rapid storage technology raid bios menu, highlight delete raid volume using the up/down arrow key then press . 2. Use the space bar to select the raid set you want to delete. Press the key to delete the set. 3. A dialogue box...
Page 78: Chapter 5
74 z97-pk user manual chapter 5 resetting disks to non-raid an hdd that has been previously configured as part of another raid set in another platform is called a broken raid hdd. When you install a broken raid hdd, you cannot select this disk when configuring a raid set through the intel ® rapid st...
Page 79: Chapter 6
75 z97-pk user manual chapter 6 chapter 6 amd crossfirex tm technology support this motherboard supports the amd crossfirex tm technology that allows you to install multi-graphics processing units (gpu) graphics cards. Follow the installation procedures in this section. Requirements 1 two identical ...
Page 80: Chapter 6
76 z97-pk user manual chapter 6 the catalyst tm control center dialog box to enable crossfirex tm : • install amd graphic card driver. • enter the catalyst control center dialog box. • check the “enable crossfirex tm ” item. • click apply button..
Page 81: Chapter 7
77 z97-pk user manual chapter 7 chapter 7 trouble shooting start up problems during assembly after assembling the pc for the first time you may experience some start up problems. Before calling for technical support or returning for warranty, this chapter may help to address some of the common quest...
Page 82: Chapter 7
78 z97-pk user manual chapter 7 your computer, like any electrical appliance, requires proper care and maintenance. Here are some basic pc care tips to help prolong the life of the motherboard and keep it running as best as it can. 1. Keep your computer in a well ventilated area. Leave some space be...
Page 83
Ub re wo p d ess er p si n o .Tr ats ot s liaf c p t ub s ey yl pp us re wo p fi kc eh c tin u gni kr o w si )u sp( on on dn uos p ee b y na on kc eh c d na so mc rl c r e wo p v2 1 up c fi d etc en no c si c p e ht t rat se r ?Dr ao b r o us p h ti w mel bor p a mr tc at noc >- mel bor p d ra ob fi...
Page 84: Chapter 7
80 z97-pk user manual chapter 7 memo.