Ectaco Partner EAF430TX User Manual - Schedule Alarm
ECTACO Partner
®
EAF430TX User
Manual
20
Schedule Alarm
In this subsection you can turn the Schedule Alarm on or off. If turned on, which
is the default setting, the Schedule Alarm will go off at the date and time of the
Schedule record, producing an audible beep.
Daily Alarm
Enter the Daily Alarm subsection.
The default values are midnight, 00:00, and off.
Use:
• , to switch between hours and minutes;
• A, P to specify AM or PM;
• u, t to turn the alarm on/off.
Press ENTER to save changes.
If turned on, the Daily Alarm produces a signal at the set time.
Press any key to interrupt the Daily Alarm beep (otherwise, the beep will
continue for 30 seconds).
Memory Check
Instantly check the free memory status with this Setup option.
Enter the Memory Check subsection to check the remaining free memory.
Data Deletion
The Data Deletion subsection gives you the ability to free up memory resources
by deleting records much faster than removing them one by one.
Set Password
With no password set (default) all functions of ECTACO Partner
®
EAF430TX are
freely accessible. After a password has been set, the following sections may be
locked against unauthorized access:
Telephones
User’s dictionaries
Security mode
Schedule
Data deletion
Set password
PC Communication
To gain access to any of these sections in the locked mode, a valid password
must be provided.
Enter the Set Password subsection.