Ectaco Partner EJ400T User Manual - Setup
Partner
®
EJ400T User’s
Manual
19
y
To receive data, select the Receive data transfer mode. Press ENTER and
the transfer will begin.
9
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
9
Note that in the Receive data mode, the newly transferred data will replace
all the old information saved in the corresponding sections of your device.
9
Always back up your important data! Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
9
Data transfer consumes a considerable amount of energy. Using an external
power supply is strongly advised.
SETUP
Personalize your EJ400T and ensure good maintenance of your personal records
by selecting options in the Setup section.
y
Enter the Setup section.
Most of the Setup section options are very easy to adjust. Unless stated
otherwise, enter a subsection and select the desired option with Ð,Ï. Then
press ENTER to confirm your choice.
Interface language
The default interface language of the EJ400T is English.
Slang lock
In this subsection you can hide slang words or phrases contained in the
dictionaries. For example, you may forbid your children access to slang. Slang
lock is ON by default. To set Slang lock OFF, enter the showslan password and
press ENTER.
English Transliteration
If set ON, the Latin transliteration will be displayed for each Japanese word in the
dictionary entries. English Transliteration is ON by default.
Advanced search
If the Advanced search is ON, the headword closest in spelling to the portion you
have entered so far will be displayed under the input line. You can speed up your
Dictionary work by choosing to turn the Advanced search mode OFF. The
Advanced Search is OFF by default.
Key tone
This feature is designed to produce a short beep every time you press a key on
the device’s keyboard. The key tone is enabled by the system’s default.