Ectaco SpeechGuard TLX User Manual - Keyboard
ECTACO
®
SpeechGuard
®
TLX
User Manual
10
Keyboard
Key
Function(s)
SOS
Messaging with GPS coordinates to up to 5 pre-programmed
phones numbers; instant call to the first phone number in
sequence.
ET
The function may vary depending on the application.
Push-to-Talk
When using the 2-Way Radio function, press this key to speak.
Volume up/
Volume down
Adjust the volume.
Shutter button Activate camera. Take a picture.
Back
Close application and go to the Home Screen. Cancel.
Menu
Show or hide the application menu. When in the Home Screen,
press this key to activate the system menu.
Search
Search. In the search window, enter the desired word or title you
want to find.
Home
Switch to the Home Screen. Press and hold: show recently used
applications.
Power Supply
ECTACO
®
SpeechGuard
®
TLX is powered by a special Li-Polymer rechargeable
battery. When the battery becomes low, a warning message will be displayed. To
restore full functionality of the device, recharge the battery as soon as possible.
The battery compartment is located on the back of the device and is covered with
a plastic cover.
To open the battery compartment, unscrew six screws, holding the
battery compartment cover.
How to Recharge the Battery
Only a special charger may be used with your ECTACO
®
SpeechGuard
®
TLX.
Use of an inappropriate external power supply may cause failure of the device and
will void the warranty.
Battery charging is performed via micro-USB port by using the AC/DC adapter or
by a computer with USB-cable. The micro-USB port is located on the lower edge
of the device and protected by a cover which can be removed by sliding the pair of
lock switches inward.
Note: Charge the battery for at least 5 hours prior to the first use of the device.
When the battery is fully discharged, the device might not turn on even if you
connect it to the AC/DC adapter. You may need to charge the battery for 2 hours
before turning on the device.